Abstract:Biopolymer-based blends of solid electrolytes capable of conducting sodium ions were prepared via solution casting by incorporating sodium carboxymethyl cellulose (NaCMC) and polyvinyl alcohol (PVA) with varying concentrations of sodium perchlorate monohydrate (NaClO 4 .H 2 O) was used as the dopant. The prepared electrolytes were characterized to reveal their structural, vibrational, electrical, and electrochemical properties that make them promising as solid polymer electrolytes (SPEs). X-ray diffraction (XRD) analysis showed that the amorphous nature of the sample increased with the addition of NaClO 4 .H 2 O salt concentrations of up to 30 wt.%. The complexation between the polymers and salt was confirmed by Fourier-Transform Infrared (FTIR) analysis. The SPE exhibited an optimal ionic conductivity of (1.90±0.05) ×10 −5 S cm −1 , which is three orders higher than that of the pristine polymer blend with (5.31±0.61) ×10 −8 S cm −1 , as determined by electrochemical impedance spectroscopy (EIS) analysis. Scaling studies conducted based on AC conductivity and tangent loss revealed that these measurements could be represented by a single master curve, which suggests that the optimal sample adheres to the time-temperature superposition principle (TTSP). The temperature dependence of Jonscher's exponent indicates that the conduction mechanism can be effectively represented by the Quantum Mechanical Tunneling model (QMT). Both transference number measurement (TNM) and linear sweep voltammetry (LSV) analyses validated the electrolyte's suitability for energy device applications by demonstrating its high ion transference number and electrochemical potential window of 3.93 V. The optimized SPE film was subsequently utilized in an electrochemical double-layer capacitor (EDLC) device to evaluate its performance as both an electrolyte and separator. The supercapacitor exhibited an impressive energy density of 15.18 Wh kg −1 and a power density of 4512.5 W kg −1 , along with remarkable stability in terms of cycle life.

Zinc oxide nanofiller-based composite polymer gel electrolyte for application in EDLCs

1-Ethyl-3-methylimidazolium trifluoromethanesulfonate-based gel polymer electrolyte for application in electrochemical double-layer capacitors

Preparation and characterization of 1-ethyl-3-methylimidazolium chloride–based gel polymer electrolyte in electrochemical double-layer capacitors

Improving EDLC Device Performance Constructed from Plasticized Magnesium Ion Conducting Chitosan Based Polymer Electrolytes via Metal Complex Dispersion

Synthesis and performance assessment of Silica dispersed nano-composite polymer gel electrolyte for high-performance solid-state Supercapacitors

Conducting Carbon Black Nano‐Filler Doped Polymer Electrolyte for Electrochemical Application

A Polymer Blend Electrolyte Based on CS with Enhanced Ion Transport and Electrochemical Properties for Electrical Double Layer Capacitor Applications

The Study of EDLC Device with High Electrochemical Performance Fabricated from Proton Ion Conducting PVA-Based Polymer Composite Electrolytes Plasticized with Glycerol

Insight into structure-property correlations in plasticized sodium carboxymethyl cellulose/pectin blend-based polymer electrolyte for EDLC application

Ion transport, dielectric, and electrochemical properties of sodium ion-conducting polymer nanocomposite: application in EDLC

Glycerolized Li+ Ion Conducting Chitosan-Based Polymer Electrolyte for Energy Storage EDLC Device Applications with Relatively High Energy Density

The study of EDLC device fabricated from plasticized magnesium ion conducting chitosan based polymer electrolyte

Flexible electric double-layer capacitors fabricated with micro-/mesoporous carbon electrodes and plastic crystal incorporated gel polymer electrolytes containing room temperature ionic liquids

Characterizing sodium-conducting biopolymer blend electrolytes with glycerol plasticizer for EDLC application

High Performance Electrospun Li+-functionalized Sulfonated Poly(ether Ether Ketone)/pva Based Nanocomposite Gel Polymer Electrolyte for Solid-State Electric Double Layer Capacitors.

Compositional dependence of electrochemical properties in biopolymer blend-based solid electrolytes doped with sodium perchlorate for EDLC applications

Electric double-layer capacitors with tea waste derived activated carbon electrodes and plastic crystal based flexible gel polymer electrolytes

The EDLC Energy Storage Device Based on a Natural Gelatin (NG) Biopolymer: Tuning the Capacitance through Plasticizer Variation

Investigations of Zinc Ion Dissociation in Gel Polymer Electrolytes Based on Poly(vinyl chloride) and Poly(ethyl methacrylate) Blend on the Addition of Two Different Ceramic Nanofillers

Chitosan as a suitable host for sustainable plasticized nanocomposite sodium ion conducting polymer electrolyte in EDLC applications: Structural, ion transport and electrochemical studies

High electrochemical and mechanical performance of zinc conducting-based gel polymer electrolytes