Abstract:Engineered cementitious composites (ECCs) are a special class of ultra-ductile fiber-reinforced cementitious composites containing a significant amount of short discontinuous fibers. The distinctive tensile strain-hardening behavior of ECCs is the result of a systematic design based on the micromechanics of the fiber, matrix, and fiber–matrix interface. However, ECCs require extensive cement content, which is inconsistent with the goal of sustainable and green building materials. Consequently, the objective of this study is to investigate the mechanical performance of slag/fly-ash-based engineered cementitious composites (ECCs) reinforced with polyethylene (PE) fiber under axial compressive loading, as well as direct tensile and flexural strength tests. The composites’ microstructure and mineralogical composition were analyzed using images obtained from scanning electron microscopy (SEM), X-ray energy diffraction spectroscopy (EDS), X-ray powder diffraction (XRD), and X-ray fluorescence (XRF). The experimental results reveal that a slag-containing composite mixture shows strain-hardening behavior and comparable ductility properties to those of fly-ash-based composite mixtures. A ternary system of binder materials with 5% and 15% slag can increase the compressive strength of ECC by 3.5% and 34.9%, respectively, compared to slag-free ECC composite. Moreover, the microstructural results show that the slag-based cementitious matrix has a more closely cross-linked and dense microstructure at the matrix–aggregate interface. In addition, the concentration of particles on the surface of the fibers was higher in the slag-based cementitious composites than in the fly ash-based composite. This supports the concept that there is a stronger bonding between the fibers and matrix in the slag-based cementitious matrix than in fly-ash-based matrix.

Properties of Engineered Cementitious Composites: A Review

Recent studies on the mechanical properties of Engineered Cementitious Composite

Compressive Behavior of Engineered Cementitious Composites under High Strain-Rate Loading

Mechanical Properties and Carbonation Durability of Engineered Cementitious Composites Reinforced by Polypropylene and Hydrophilic Polyvinyl Alcohol Fibers

Theoretical Research and Performance of Engineered Cementitious Composite

Fresh/Mechanical/Durability Properties and Structural Performance of Enginnered Cementitious Composite (ECC)

Effect of Fiber Type and Volume Fraction on Fiber Reinforced Concrete and Engineered Cementitious Composite Mechanical Properties

Investigation of the Mechanical Properties of Engineered Cementitious Composites with Low Fiber Content and with Crumb Rubber and High Fly Ash Content

Seismic Behavior of Reinforced Engineered Cementitious Composite Members and Reinforced Concrete/engineered Cementitious Composite Members: A Review

Evaluation of Engineered Cementitious Composites (ECC) containing Polyvinyl Alcohol (PVA) fibers under compressive, direct tensile, and drop-weight test

Compression and Flexural Behavior of ECC Containing PVA Fiber

Evaluation of the Performance of Engineered Cementitious Composites (ECC) Produced from Local Materials

Eco-Friendly, High-Ductility Slag/Fly-Ash-Based Engineered Cementitious Composite (ECC) Reinforced with PE Fibers

Characteristics of High Ductility and Low Shrinkage Engineered Cementitious Composite and Its Applications

Design and Performance of Cost-Effective Green Engineered Cementitious Composites with Low Drying Shrinkage and Self-Healing

Durability Performance Investigation for Engineering Fiber Cementitious Composites (ECC): Review

Engineered Cementitious Composites Using Chinese Local Ingredients: Material Preparation and Numerical Investigation

Energy Evolution Characteristics of Engineered Cementitious Composites (ECC) under Tensile and Compressive Loading

Influence of Stone Processing Waste on Mechanical, Durability, and Ecological Performance of Hybrid Fiber-Reinforced Engineered Cementitious Composite

Multifunctional engineered cementitious composites modified with nanomaterials and their applications: An overview

Tensile properties of slag-based engineered cementitious composites with ground granulated blast-furnace slag