Abstract:The sliding of laminated rubber bearings (LRBs) and failure of shear keys observed in the Wenchuan earthquake significantly increase the span collapse risk of simply-supported highway bridges and contradict the ductile design philosophy recommended by the current design code in China. In the meantime, the seismic damage mode of bridges may also change with increasing service time due to environmental corrosion sustained by the ductile element of pier. It is well accepted that the change of bridge damage mode will cause the ineffectiveness of original seismic design. In order to identify transverse seismic damage modes of deteriorating simply-supported bridges, a five-span bridge is selected as the baseline bridge and a series of time-dependent models considering the chloride intrusion are developed. A methodology for identifying the seismic damage mode of the bridge system is proposed. Incremental dynamic analyses (IDAs) are performed to study the effects of service time and shear key capacity on seismic damage modes of the baseline bridge. To validate the results obtained from the baseline bridge, comparisons of the lifetime damage modes for several typical bridge configurations are conducted through the proposed methodology. The results indicate that with the increase of the service time of bridge, the displacement response of LRBs decreases slightly while the displacement ductility response of piers increases significantly under earthquakes, and the seismic damage mode of the bridge shows a trend of changing from displacement-oriented to strength-oriented or combined damage modes. On the other hand, the increase of shear key capacity can effectively prevent excessive girder movement but intensifies the damage level of piers under earthquakes, which is in accordance with the expectations of the ductile design philosophy. In conclusion, the combined effects of environmental corrosion and shear key capacity can significantly change the seismic damage modes of bridges along the transverse direction and thus should be considered carefully during the seismic design.

The 1996 Japanese seismic design specifications of highway bridges and the performance based design

Problems in Chinese Highway Bridge Seismic Specifications and Suggestions for Improvement

Residual seismic performance of steel bridges under earthquake sequence

SEISMIC DESIGN METHOD OF SMALL AND MEDIUM SPAN BRIDGE CONSIDERING BEARING FRICTION SLIPPING

Development of partial factor design method on bearing capacity of pile foundations for Japanese Specifications for Highway Bridges

Toward life-cycle reliability-, risk- and resilience-based design and assessment of bridges and bridge networks under independent and interacting hazards: emphasis on earthquake, tsunami and corrosion

Transverse seismic damage mode identification of deteriorating simply-supported highway bridges

Studies on Seismic Demand Spectra Based on Strength Reduction Factor

Seismic performance assessment of highway bridge networks considering post-disaster traffic demand of a transportation system in emergency conditions

Performance-Based Seismic Design for Bridge Bents Retrofitted with BRBs Using the Ductility Demand Spectra of SDOF Oscillators with Bilinear Fuses

Seismic Damage of Highway Bridges During the 2008 Wenchuan Earthquake

Improved bridge capacity rating methods based on system reliability assessment

The Damage And The Possible Use Of Foundation Structures Due To The 1995 Hyogoken-Nambu Earthquake

Probabilistic seismic demand of typical highway bridges in moderate-intensity zones

Effects of Fault Rupture on Seismic Responses of Fault-Crossing Simply-Supported Highway Bridges

Seismic Safety Evaluation of Bridge Structures Based on Inelastic Spectrum Method

Performance-Based Seismic Fragility and Residual Seismic Resistance Study of a Long-Span Suspension Bridge

Assessment of bridge vulnerability due to seismic excitations considering wave passage effects

3d Impact Model Of Highway Bridge During Seismic Events

Seismic fortification criterion and importance factor for seismic design of highway bridges

Vehicular impact resistance of highway bridge with seismically-designed UHPC pier