Abstract:Abstract: The main objective of in this the paper presents the investigation by kenaf fiber of silane usage of regarding silicon (IV) oxide on to using several mechanical tests similar to tensile strength, flexural and impact test are mechanical properties which helps to use in various industrial mechanical commercial applications. The kenaf fiber is soaked in a mixture of ethanol and silicon (IV) oxide which is known as treatment process and the non-hydrated kenaf fiber in untreated process. The plates are arranged to ASTM based on dimension in the form 3 ply’s of kenaf layer is inserted; It is molded with the help of epoxy resin. The composites there was fabricated using the hot press to form plate to Infusion in mixture process by the making of a compressed approximate orientation kenaf mat. The natural kenaf fiber as 50% vol with added of each plate in silicon (IV) oxide of 1%, 2%, and 2.5% there was used to make the hybrid composites. Then various test are flexural, tensile, micro hardness, impact and water absorption test, it is also based on treated and untreated values. These are some of the important stages on the followed in these procedures. Improving the impact of kenaf fiber on crack resistance, durability and mechanical properties in concrete applications. In this research, kenaf fiber is separate in treated and untreated composite materials. The mechanical fields which help to develop the efficiency of the experimental where the kenaf fibre material is being used. The main role of reason for the usage of thismaterial is to avoid plastics. Because of natural fibers are commonly weaker than to synthetic fibers, they tend to weaken mechanically and physically over period due to the porosity of the fibers. The final test performed known as tensile in breakage point to be SEM test, the test we can able to see the 200μ to 500μ range in micro image of this material. The composites with added of 2.5% vol nano silica show greatest mechanical methods of the samples treated with an silica nanoparticles at 264 Mpa and 6352 Mpa for flexural strength, flexural modulus. The effects presented that the adding of nano silica (IV) particles with kenaf fiber in general has a good effect on mechanical properties.

Effect of surface treatment of natural reinforcement on thermal and mechanical properties of vinyl ester/polyurethane interpenetrating polymer network-based biocomposites

Study of Mechanical and Thermomechanical Properties of Vinyl Ester/Polyurethane Interpenetrating Polymer Network Based Hybrid Composites

Effect of Fiber Surface Modification on the Interfacial and Mechanical Properties of Kenaf Fiber-Reinforced Thermoplastic and Thermosetting Polymer Composites

Physio-mechanical and thermal behavior of kenaf (Hibiscus cannabinus L.) fiber-reinforced epoxy composites: effect of eco-friendly treatment

Effect of Fibre Loading on Mechanical Behavior of Kenaf Fibre and Nano Silica Reinforced epoxy Resin Composite Material with and without Silane Treatment

Mechanical, morphological and wear resistance of natural fiber / glass fiber-based polymer composites

Load-Bearing and Machining Behavior of Treated Nano-sorghum-Millet-Husk-Biosilica- and Kenaf-Fiber-Reinforced Vinyl Ester Composite

Effect of silane treatment on corn husk and tamarind fiber and betel nut filler on fatigue, thermal conductivity, and machining behavior of epoxy biocomposites

Effect of Various Surface Treatments on the Performance of Jute Fibers Filled Natural Rubber (NR) Composites

Insight to the influence of alkali treatment on mechanical and tribological properties of a novel carbon/jute hybrid porcine filled polyester composite

Exploration of Mechanical Attributes, Thermal Behaviors and Atomic Force Analysis of Alkali Treated Hybrid Polyester Composites for an Engineering Application

Mechanical, free vibration, electrical, and water absorption properties of vinyl ester composites reinforced with Phoenix sp. fibers: Influence of eco‐friendly sodium bicarbonate treatment

Effect of Amino Silane Grafted Cellulose and Kenaf Fibers in Mechanical, Impact Toughness and Drilling Characteristics of Epoxy Resin Composite

Study on the modification of polyester resin bamboo fiber-based composite with euphorbia coagulum and their effect on mechanical and thermal properties

The Influence of Chemically Treated Hemp Fibre on the Mechanical Behavior and Thermal Properties of Polylactic Acid Made with FDM

Natural jute fiber treated with silane coupling agent KH570 reinforced polylactic acid composites: mechanical and thermal properties

Nano-clay treatment of jute fiber for reinforcement in polymer composites: Mechanical, morphological, and thermo-kinetic analysis

Comprehensive insights on mechanical properties of natural–synthetic fibers with MWCNT nano-composite

Chemical, biological, and nanoclay treatments for natural plant fiber-reinforced polymer composites: A review

Influence of fiber surface treatments and hybridization on interply and intraply Kevlar reinforced polymer composites

Influence of heat treated fox tail millet husk biosilica on dynamic properties of nettle fibre-reinforced vinyl ester composite