Influence of heat treated fox tail millet husk biosilica on dynamic properties of nettle fibre-reinforced vinyl ester composite

R. Prabu,G. Yuvaraj,M. Satthiyaraju

DOI: https://doi.org/10.1007/s00289-024-05378-8

IF: 2.843

2024-07-15

Polymer Bulletin

Abstract:This study offers a detailed examination of vinyl ester composites strengthened with nettle fibres and annealed biosilica from foxtail millet husk biomass waste. The primary objective is to investigate how the different dwell time processed heat treated biosilica particles perform under repeated and prolonged loading applications in natural fibre-reinforced polymer composite materials. The biosilica particles were annealed at 1200 °C and dwelled for 2 h and 4 h. The results highlight VNS 32 (resin with nettle fibre of 30 vol.% and biosilica of 2 vol.%) as the superior composite, exhibiting higher fatigue counts of 29,108, 27,898, and 26,247 for 25%, 50%, and 75% of the ultimate tensile strength (UTS). Similarly, VNS 32 demonstrates superior values in creep and dynamic mechanical analysis (DMA). In creep testing, VNS 32 shows creep strain values of 0.0015, 0.0019, and 0.0035 for 5000 s, 10,000 s, and 15,000 s, while in DMA, it achieves a storage modulus of 5.6 GPa at 107 °C and a loss factor of 0.42. These findings suggest that the utilization of prolonged annealed biosilica contributes to enhanced structural integrity and uniform load transfer, both in normal and cyclic loading conditions at specific temperatures. Moreover, these composites could be used in automotives, lightweight building material applications, drones, defence and food packaging where lightweight and high strength is required.

polymer science