Abstract:Conducting an in-depth study of the characteristics of a two-phase rotating detonation combustor is crucial for developing a new type of air-breathing engine that can be used for wide-range flight. This study established the first full-process air-breathing two-phase rotating detonation numerical combustor, based on published experimental data, using the Euler-Lagrangian method to simulate the complete process of fuel injection, breaking, evaporation, blending, and combustion. The simulation model analyzed the cold flow and the combustion flow field after detonation ignition, providing insight into the interaction mechanism between the two-phase detonation wave and fuel. The simulation results showed that the secondary heat release after the detonation wave was caused by the secondary combustion of unburned droplets. The working frequency of the detonation combustor was found to be 2301 Hz, and the propagation speed was 1228.89 m/s. Compared to the experiment, the simulation showed a deviation of approximately 19.5% in terms of frequency and detonation wave propagation velocity. When the Sauter-mean diameter of the droplets D 32 was around 25 μm, the combustor was able to operate stably. The thrust generated by the engine was approximately 1009 N, and the fuel-specific impulse was about 1767.5 s. These findings have significant theoretical value in designing a two-phase air-breathing rotating detonation combustor and engine. The first full-process air-breathing two-phase rotating detonation numerical combustor was established by using the Euler-Lagrangian simulation method. The interaction mechanism between the two-phase detonation wave and the fuel was summarized. The working process, internal flow field characteristics, and thrust performance were analyzed.

Three-dimensional modeling of rotating detonation in a ramjet engine

Rotating detonation in a ramjet engine three-dimensional modeling

Rotating Detonation Wave in an Annular Gap

Investigation of Rotating Detonation Waves in an Annular Gap

Mathematical modeling of a rotating detonation wave in a hydrogen-oxygen mixture

3-D simulation of rotating detonation wave in combustion chambers without inner wall

Numerical Study of the Reverse-Rotating Waves in Rotating Detonation Engine with a Hollow Combustor

Numerical simulation on the operating characteristics of rotating detonation ramjet engines at high flight mach number

Quasi-Two-Dimensional Simulation of a Rotating Detonation Engine Combustor and Injector

Numerical simulation of radial-stratified rotating detonation flow field structures with different injection patterns

Numerical Investigation of Spontaneous Formation of Multiple Detonation Wave Fronts in Rotating Detonation Engine

Three-dimensional Numerical Study on Rotating Detonation Engines Using Reactive Navier-Stokes Equations

Analysis of Waves Dynamics in a Rotating Detonation Combustor Fueled by Kerosene

Numerical investigation of detonation initiation in a modeled rotating detonation engine

Rotating Detonation Engine Injection Velocity Limit And Nozzle Effects On Its Propulsion Performance

Numerical Investigation of Contact Burning in an Air-Breathing Continuous Rotating Detonation Engine

Numerical Investigation of Shock Wave Reflections Near the Head Ends of Rotating Detonation Engines

Numerical investigation of two-wave collision and wave structure evolution of rotating detonation engine with hollow combustor

Effects of Injection Conditions on the Stability of Rotating Detonation Waves

Formation and Evolution of the Numerical Air-Breathing Rotating Detonation Fueled by C12H23

Experimental research on initiation characteristics of a rotating detonation engine