Abstract:Conducting an in-depth study of the characteristics of a two-phase rotating detonation combustor is crucial for developing a new type of air-breathing engine that can be used for wide-range flight. This study established the first full-process air-breathing two-phase rotating detonation numerical combustor, based on published experimental data, using the Euler-Lagrangian method to simulate the complete process of fuel injection, breaking, evaporation, blending, and combustion. The simulation model analyzed the cold flow and the combustion flow field after detonation ignition, providing insight into the interaction mechanism between the two-phase detonation wave and fuel. The simulation results showed that the secondary heat release after the detonation wave was caused by the secondary combustion of unburned droplets. The working frequency of the detonation combustor was found to be 2301 Hz, and the propagation speed was 1228.89 m/s. Compared to the experiment, the simulation showed a deviation of approximately 19.5% in terms of frequency and detonation wave propagation velocity. When the Sauter-mean diameter of the droplets D 32 was around 25 μm, the combustor was able to operate stably. The thrust generated by the engine was approximately 1009 N, and the fuel-specific impulse was about 1767.5 s. These findings have significant theoretical value in designing a two-phase air-breathing rotating detonation combustor and engine. The first full-process air-breathing two-phase rotating detonation numerical combustor was established by using the Euler-Lagrangian simulation method. The interaction mechanism between the two-phase detonation wave and the fuel was summarized. The working process, internal flow field characteristics, and thrust performance were analyzed.

Numerical Investigation of Contact Burning in an Air-Breathing Continuous Rotating Detonation Engine

Numerical Investigation on New Engine Combustion Charactristic of Helicopter

Numerical Study of the Reverse-Rotating Waves in Rotating Detonation Engine with a Hollow Combustor

Three-dimensional Numerical Study on Rotating Detonation Engines Using Reactive Navier-Stokes Equations

Formation and Evolution of the Numerical Air-Breathing Rotating Detonation Fueled by C12H23

Three-dimensional Numerical Investigations of the Rotating Detonation Engine with a Hollow Combustor

Numerical Investigation of Flow Particle Paths and Thermodynamic Performance of Continuously Rotating Detonation Engines

Numerical Investigation of Rotating Detonation Engine Propulsive Performance

Numerical Investigation of Flow Properties of Rotating Detonation Engines

Numerical Investigation on Effects of Ignition Energy on Two-phase Detonation Wave Formation

Numerical investigation of detonation initiation in a modeled rotating detonation engine

Numerical Investigation of Spontaneous Formation of Multiple Detonation Wave Fronts in Rotating Detonation Engine

Numerical simulations and theoretical analysis of the forward shock wave in a non-premixed air-breathing rotating detonation combustor

Numerical Investigation of Different Injection Patterns in Rotating Detonation Engines

Numerical investigation of two-wave collision and wave structure evolution of rotating detonation engine with hollow combustor

Quasi-Two-Dimensional Simulation of a Rotating Detonation Engine Combustor and Injector

Experimental Investigation of a Cylindrical Air-Breathing Continuous Rotating Detonation Engine with Different Nozzle Throat Diameters

Numerical Analysis of Combustion Dynamics in a Full-Scale Rotating Detonation Rocket Engine using Large Eddy Simulations

Numerical Investigation of the Instability of Continuous Detonation Engine

Experimental Investigation on H 2 / O 2 Continuously Rotating Detonation Engine

Numerical research on kerosene/hydrogen/air rotating detonation engines with discrete injection strategies