Mathematical modeling of a rotating detonation wave in a hydrogen-oxygen mixture

S. A. Zhdan,F. A. Bykovskii,E. F. Vedernikov

DOI: https://doi.org/10.1007/s10573-007-0061-y

2007-07-01

Abstract:A two-dimensional unsteady mathematical model of spin detonation in an annular cylindrical ramjet-type combustor is formulated. The wave dynamics in the combustor filled by a hydrogen-oxygen mixture is studied numerically.

What problem does this paper attempt to address?

Three-dimensional modeling of rotating detonation in a ramjet engine

N.N. Smirnov,V.F. Nikitin,L.I. Stamov,E.V. Mikhalchenko,V.V. Tyurenkova

DOI: https://doi.org/10.1016/j.actaastro.2019.02.016

IF: 2.954

2019-10-01

Acta Astronautica

Abstract:A 3D numerical model of a combustion chamber with continuous rotating detonation wave was performed. The ignition, onset and stabilization of a rotating detonation wave in combustion chambers of different shapes was investigated. The effect of additional oxygen injection on the onset of rotating detonation wave was studied. Formation of a stable detonation wave was investigated against different factors: internal body diameter, injectors number and diameter, pressure at the fuel and oxidizer orifices. The calculations were performed using specialized computer code designed by the Authors at the APK-5 super-computer system.

engineering, aerospace
Rotating Detonation Wave in an Annular Gap

V. A. Levin,I. S. Manuylovich,V. V. Markov

DOI: https://doi.org/10.1134/s0081543818010108

2018-01-01

Proceedings of the Steklov Institute of Mathematics

Abstract:We consider a three-dimensional unsteady flow with a rotating detonation wave arising in an annular gap of an axially symmetric engine between two parallel planes perpendicular to its symmetry axis. The corresponding problem is formulated and studied. It is assumed that there is a reservoir with quiescent homogeneous propane–air combustible mixture with given stagnation parameters; the mixture flows from the reservoir into the annular gap through its external cylindrical surface toward the symmetry axis, and the parameters of the mixture are determined by the pressure in the reservoir and the static pressure in the gap. The detonation products flow out from the gap into a space bounded on one side by an impermeable wall that is an extension of a side of the gap. Through a hole on the other side of the gap and through a conical output section with a half-opening angle of 45°, the gas flows out from the engine into the external space. We formulate a model of detonation initiation by energy supply in which the direction of rotation of the detonation wave is defined by the position of the energy-release zone of the initiator with respect to the solid wall situated in a plane passing through the symmetry axis. After a while, this solid wall disappears (burns out). We obtain and analyze unsteady shock-wave structures that arise during the formation of a steady rotating detonation. The analysis is carried out within single-stage combustion kinetics by the numerical method based on the Godunov scheme with the use of an original software system developed for multiparameter calculations and visualization of flows. The calculations were carried out on the Lomonosov supercomputer at Moscow State University.

mathematics, applied
Numerical Study of the Reverse-Rotating Waves in Rotating Detonation Engine with a Hollow Combustor

Xiang-Yang Liu,Yan-Liang Chen,Song-Bai Yao,Jian-Ping Wang

DOI: https://doi.org/10.1016/j.actaastro.2020.02.008

IF: 2.954

2020-01-01

Acta Astronautica

Abstract:This paper adopts the injection model via an array of holes in three-dimensional numerical simulations of a rotating detonation engine with hollow chamber. Premixed stoichiometric hydrogen-air mixture is used. The calculation is based on the compressible Euler equations coupled with a one-step Arrhenius chemistry model. The numerical results show that this injection model can realize stable continuously rotating detonation wave in hollow chamber. In final stable detonation flow-field, besides the multiple detonation waves rotating along outer wall of chamber, there are reverse-rotating waves which propagate in opposite direction of detonation wave. The reverse-rotating wave is much weaker than detonation wave and curved along radial direction of combustion chamber. Pressure gradient contours are used to distinguish these weak reverse-rotating waves. Detonation waves and reverse-rotating waves periodically collide with each other, forming a counter-rotating wave system. The lateral slices of flow-field at various radial positions show that the collision process of counter-rotating waves in flow-field can be divided into two types, shock-to-shock collision and detonation-to-shock collision. In addition, the intensity of detonation waves is the highest on the outer wall and gradually decreases with radius going down. Finally, the detonation wave decouples at a certain radial position and degenerates into shock wave.
Numerical investigation of detonation initiation in a modeled rotating detonation engine

Chao Han,Jing Bian,Baolu Shi,Cheng Tian,Majie Zhao

DOI: https://doi.org/10.1063/5.0179228

IF: 4.6

2024-01-01

Physics of Fluids

Abstract:In experimental studies, single-wave mode and two counter-rotating wave mode are often observed in rotating detonation combustors. To investigate the mechanism behind different propagation modes, high-resolution numerical simulations of two-dimensional detonation in hydrogen/air mixtures are conducted by solving the reactive Navier–Stokes equations with a detailed chemical mechanism. The numerical results show that the occurrence of the dual-wave detonation propagation mode is positively influenced by an increase in both the channel width and the initial pressure. The dual-wave modes are observed when increasing the channel width, and it is found that the dual-wave modes are caused by increasing the residual premixed gas height near the inner wall. When increasing the initial pressure, the initial peak detonation heat release increases, which leads to the increase in the hot spot intensity formed, and it is found that the dual-wave modes are mainly caused by the interactions between the initial detonation wave and the inner wall. However, the initial equivalent ratio appears to have a relatively minor impact on the detonation propagation mode due to a relatively narrow range variation of physical properties. The peak heat release rate exerts a greater influence on the change of the propagation mode than the induction time does through a wider range test on rotating detonation engines' working condition. Moreover, the velocities and the cell sizes of detonation waves propagating in different directions with different channel widths are also analyzed, revealing that the characteristics of the detonation waves propagating in different directions are nearly the same.

mechanics,physics, fluids & plasmas
Quasi-Two-Dimensional Simulation of a Rotating Detonation Engine Combustor and Injector

S. She-Ming Lau-Chapdelaine,Matei Radulescu,Zekai Hong

DOI: https://doi.org/10.2514/1.b39214

2024-01-01

Journal of Propulsion and Power

Abstract:A numerical simulation of an annular rotating detonation engine with stoichiometric hydrogen–oxygen is performed. A generic, well-posed, and easily implemented approach using a quasi-two-dimensional method to model the area variations through the rotating detonation engine’s injector and combustor is presented. The detonation–injector interaction is studied for the case with a ratio of four between the combustor and injector’s throat areas. A shock wave is formed in the divergent portion of the injector due to the high backpressure created by the detonation in the combustor. A Favre-averaged steady-state analysis of stream lines and particle paths reveals that the shock causes an irrecoverable loss of stagnation pressure. Stagnation pressure gain in the combustor is insufficient to make up for the loss, and the flow leaves the engine with lower stagnation pressure than in the plenum.
Investigation of Rotating Detonation Waves in an Annular Gap

V. A. Levin,I. S. Manuylovich,V. V. Markov

DOI: https://doi.org/10.1134/S0081543820050156

2020-12-05

Proceedings of the Steklov Institute of Mathematics

Abstract:We formulate and numerically analyze the problem of formation of rotating three-dimensional detonation waves in an annular gap between parallel plates. It is assumed that a homogeneous combustible mixture contained in a reservoir with given stagnation parameters flows into the gap through elementary nozzles that uniformly fill the external ring bounding the gap. The gas dynamic parameters of the mixture are defined as functions of the stagnation parameters and the static pressure in the gap. In the absence of ignition, the mixture flows out into a half-closed axially symmetric volume bounded on one side by a flat disk (extension of one of the plates forming the gap). On the opposite side of the volume, a nozzle is attached, through which the mixture flows out into air at given pressure and temperature. Detonation is initiated by a directional explosion, i.e., by energy supply to the flow of the combustible mixture in a narrow area where it flows into the gap. We work out a method that allows the simultaneous initiation of several detonation waves rotating in a given direction. For the considered geometric parameters of the flow region, the formation of one to four rotating detonation waves is observed. We analyze the stability of the process under the variation of the stagnation parameters of the mixture, and obtain data on the corresponding reactive force due to the jet of detonation products flowing out into air. We present the results of calculations for a propane–air mixture that are obtained within the single-stage combustion kinetics by a numerical method based on S. K. Godunov's scheme and implemented in the original software system on the Lomonosov supercomputer at Moscow State University.

mathematics, applied
Numerical Simulation of Oblique Detonation Initiation by a High-Velocity Projectile Flying in a Hydrogen–Air Mixture

I. A. Bedarev,A. A. Syrovaten,V. M. Temerbekov

DOI: https://doi.org/10.1134/s0010508224010039

2024-04-24

Combustion Explosion and Shock Waves

Abstract:A mathematical method is developed for solving the problem of detonation initiation in a hydrogen–air mixture by a small-diameter sphere flying with a velocity greater than the Chapman–Jouguet detonation velocity. The mathematical model verification is performed against experimental data on the detonation cell size in hydrogen–oxygen and hydrogen–air mixtures. Depending on the pressure in the mixture, which is varied from 100 to 250 kPa, three types of oblique detonation waves are obtained: (1) stabilized oblique detonation wave at 250 kPa; (2) stabilized oblique detonation wave of the "straw hat" type at 200 kPa; (3) periodic regime with an attenuated oblique detonation wave, which was not observed in previous experiments, at 125 kPa. At 100 kPa, a regime of shock-initiated combustion is observed. Based on an analytical dependence, the energy of detonation initiation by a high-velocity projectile is estimated, and the analytical and numerical data are found to be in good agreement.

energy & fuels,engineering, chemical,thermodynamics,materials science, multidisciplinary
Analysis of Waves Dynamics in a Rotating Detonation Combustor Fueled by Kerosene

Wenqi Fan,Yingchen Shi,Haocheng Wen,Haifeng Hu,Hongyu Chen,Bing Wang

DOI: https://doi.org/10.1063/5.0231516

IF: 4.6

2024-01-01

Physics of Fluids

Abstract:The wave dynamics play a crucial role in the operation characteristics of the rotating detonation engine. We conducted numerical simulations of a rotating detonation combustor (RDC) using multicomponent reactive Navier-Stokes equations coupled with a discrete phases model. The RDC in this research employs a configuration with multiple coaxial injectors supplying oxygen-enriched air and kerosene spray at room temperature. To accurately identify and analyze waves within the RDC, we proposed a three-dimensional transient detonation wave detection method based on the combined parameters of normal Mach number and heat release rate in the flow field. Two typical wave modes, referred to as single-wave mode and counter-waves mode, are identified and then selected to conduct a detailed wave dynamics analysis. The general wave behavior is discussed, and velocity deficit is compared for these two wave modes. For the single-wave mode, intermittent micro-explosions are observed generating retonation waves periodically in the unburnt pockets behind the rotating detonation shock front. For the counter-waves mode, we analyzed the collision process of the two waves and the coupling/decoupling of the shock front with the detonative heat release zone, revealing the reason for significant velocity deficits in this wave mode. This research demonstrates that micro-explosions intermittently occur in the multiphase RDC in both single-wave and counter-waves modes and generate micro explosion shock waves periodically, which influence the complicated wave dynamics behavior.
A Quasi-one-dimensional Analytic Model of Rotating Detonation Combustors

R. Kawashima,I. Funaki,J. Fujii,A. Matsuo,K. Ishihara,J. Kasahara

DOI: https://doi.org/10.48550/arXiv.1712.02915

IF: 0.673

2017-12-08

Fluid Dynamics

Abstract:A quasi-one-dimensional analytic model is proposed for the internal fluid of rotating detonation combustors (RDCs). This model uses the shock-tube model that constrains the flow to have only a longitudinal component, while admitting the propagation of the detonation wave in the azimuthal direction. The proposed model is able to compute the thruster performance and two-dimensional distributions of gas properties. The calculation process of the model excludes iterative calculation or space discretization. The case calculations of the hydrogen-air RDC and the ethylene-oxygen RDC are conducted, and the results calculated by the analytic model are compared with those simulated by computational fluid dynamics (CFD). Good agreement has been observed between the results obtained with the proposed model and CFD, in terms of both of the qualitative and quantitative comparisons. The proposed model is simple and fast, and also maintains the fundamental characteristics of RDCs.
Origin and chaotic propagation of multiple rotating detonation waves in hydrogen/air mixtures

Majie Zhao,Huangwei Zhang

DOI: https://doi.org/10.1016/j.fuel.2020.117986

IF: 7.4

2020-09-01

Fuel

Abstract:<p>The origin and chaotic propagation of multiple detonative waves in the two-dimensional modelled rotating detonation combustor fueled by premixed hydrogen/air mixtures are numerically investigated with detailed chemical mechanism. The discrete reactants inlets are adopted, to mimic the spatial non-uniformity of the propellant in the practical Rotating Detonation Engine (RDE) combustor. The emphasis is laid on the mechanism to induce the new detonation waves in the RDE and the influence of the reactant non-uniformity in RDE on the critical detonation combustion dynamics. The numerical experiments show that the stability and number of the rotating detonation wave are affected by the inlet total pressures and reactant equivalence ratios. The RDE with high inlet total pressure would experience chaotic instability before reaching stable propagation of detonation waves in near-stoichiometric mixtures, while for the RDE with low inlet total pressure, no chaotic propagation transient after the detonation initiation is observed. It is found that the chaotic propagation stage is responsible for the variation of the rotating detonative wave number and propagation direction. Frequent detonation extinction, re-ignition and re-orientation, irregular reactants refill zones, co-rotating and counter-rotating detonation waves are observed during chaotic stage. The explosive spots arising during this stage, which may initiate new detonation waves, result from the mutual enhancement between the travelling shock waves and the deflagrative fronts. Furthermore, the predictability of the chaotic detonation wave propagation is further confirmed in terms of the initial and boundary conditions, mesh and chemical mechanism. It is also found that the fuel equivalence ratio has a considerable impact on the number of the stabilized detonation wave and velocity deficit.</p>

energy & fuels,engineering, chemical
Numerical Study on the Instabilities in H2-air Rotating Detonation Engines

Yan Liu,Weijiang Zhou,Yunjun Yang,Zhou Liu,Jianping Wang

DOI: https://doi.org/10.1063/1.5024867

IF: 4.6

2018-01-01

Physics of Fluids

Abstract:Numerical simulations of rotating detonation engines (RDEs) are performed using two-dimensional Euler equations and a detailed chemistry model of H2-air. Two propagation modes, the one-wave mode and the two-wave mode, are observed in the RDEs. The instabilities of the RDEs are studied and analyzed specifically. A low frequency instability and a high frequency instability are found from the pressure-time trace measured at a fixed location and the average density-time trace of the RDEs. For the low frequency instability, the pressure peak of the pressure-time trace oscillates with a low frequency while the average density is stable. The deviation between the measurement location and the location of the detonation wave results in the low frequency instability. For the high frequency instability, the average density of the RDEs oscillates regularly with a single frequency while the pressure oscillates irregularly with several frequencies. The oscillation of the detonation wave height results in the high frequency instability. Furthermore, the low frequency instability and the high frequency instability both occur in the one-wave and two-wave mode RDEs.
Rotating Detonation Instabilities in Hydrogen-Oxygen Mixture

Yu Hui Wang,Jian Ping Wang

DOI: https://doi.org/10.4028/www.scientific.net/amm.709.56

2014-01-01

Applied Mechanics and Materials

Abstract:Rotating detonation engines are studied more and more widely because of high thermodynamic efficiency and high specific impulse. Rotating detonation of hydrogen and oxygen was achieved in this study. Rotating detonation waves were observed by high speed cameras and detonation pressure traces were recorded by PCB pressure sensors. The velocity of rotating detonation waves is fluctuating during the run. Low frequency detonation instabilities, intermediate frequency detonation instabilities and high frequency detonation instabilities were discovered. They are relevant to unsteady heat release, acoustic oscillations and rotating detonation waves.
Numerical investigation of flow structures with an oblique detonation wave in a hypersonic annular cylindrical chamber

Anatoliy V Trotsyuk

DOI: https://doi.org/10.1088/1742-6596/899/4/042010

2017-09-01

Journal of Physics: Conference Series

Abstract:A new supersonic flow-type annular detonation combustor is designed in which steady oblique detonation waves in the channel are generated using a compression body in the form of a solid single-wound spiral with a constant pitch angle. A two-dimensional unsteady mathematical model of the reacting flow in this device is formulated. The flow dynamics at the start of the chamber operation and steady supersonic flow structures for a stoichiometric hydrogen-air flow with an inlet Mach number M0=5 are numerically investigated. Two-dimensional numerical simulation is carried out for different spiral angles and geometrical dimensions of the chamber. A bifurcation of steady flow structures with respect to the initial condition of the problem is observed.

English Else
Numerical Simulation of Wave Mode Transition in Rotating Detonation Engine with OpenFOAM

Zhi-Jie Xia,Ming-Yi Luan,Xiang-Yang Liu,Jian-Ping Wang

DOI: https://doi.org/10.1016/j.ijhydene.2020.05.100

IF: 7.2

2020-01-01

International Journal of Hydrogen Energy

Abstract:Two-dimensional numerical simulations of rotating detonation engine are carried out with detailed chemical kinetic mechanism using detoFoam, a custom solver based on OpenFOAM 7. The results show the transition process from single wave with counter-rotating components mode to two counter-rotating waves at equal speed mode. Counter-rotating components are weak waves propagating in the opposite direction against the primary detonation wave. The mechanism behind the transition process is that the counter-rotating components gain energy from collisions with detonation waves and the fresh gas region. When counter-rotating components gain more energy than they lose in one cycle, they become stronger until the peak pressure reaches a threshold value. When a counter-rotating component is strong enough, its collision with fresh gas region will ignite a detonation wave, breaking the steady state. The new detonation wave propagates in the opposite direction against the original detonation wave, leading to the formation of two counter-rotating detonation waves.
Modeling thermodynamic trends of rotating detonation engines

James Koch,J. Nathan Kutz

DOI: https://doi.org/10.1063/5.0023972

IF: 4.6

2020-12-01

Physics of Fluids

Abstract:The formation of a number of co- and counter-rotating coherent combustion wave fronts is the hallmark feature of the Rotating Detonation Engine (RDE). The engineering implications of wave topology are not well understood nor quantified, especially with respect to parametric changes in combustor geometry, propellant chemistry, and injection and mixing schemes. In this article, a modeling framework that relates the time and spatial scales of the RDE to engineering performance metrics is developed and presented. The model is built under assumptions of backpressure-insensitivity and nominally choked gaseous propellant injection. The Euler equations of inviscid, compressible fluid flow in one dimension are adapted to model the combustion wave dynamics along the circumference of an annular-type RDE. These adaptations provide the necessary mass and energy input and output channels to shape the traveling wave fronts and decaying tails. The associated unit processes of injection, mixing, combustion, and exhaust are all assigned representative time scales necessary for successful wave propagation. We find that the separation, or lack, of these time scales is responsible for the behavior of the system, including wave co- and counter-propagation and bifurcations between these regimes and wave counts. Furthermore, as there is no imposition of wave topology, the model output is used to estimate the net available mechanical work output and thermodynamic efficiency from the closed trajectories through pressure–volume and temperature–entropy spaces. These metrics are investigated with respect to variation in the characteristic scales for the RDE unit physical processes.

mechanics,physics, fluids & plasmas
Simulation of wave mode switching in a rotating detonation engine with gaseous and liquid fuel

Marc Salvadori,Achyut Panchal,Suresh Menon

DOI: https://doi.org/10.1016/j.ast.2024.109008

IF: 5.457

2024-03-02

Aerospace Science and Technology

Abstract:Three-dimensional simulations of a realistic two-phase rotating detonation engine are conducted to understand the effects of gaseous and liquid fuel on mechanisms of wave mode switching. A fully compressible solver coupled with an Eulerian-Lagrangian approach is used for this numerical study. Hydrogen and kerosene are used as gaseous and liquid fuels, respectively, with air as an oxidizer. Starting from an established dual-wave mode solution with gaseous hydrogen as fuel, when the hydrogen mass flow rate is reduced to half, a weak/unstable wave propagation is obtained. On the other hand, while injecting kerosene spray in addition to the lean hydrogen gas, the original two-wave system transitions into a single stable self-sustained detonation wave. Analyses of these results show that during the wave mode switching from dual-wave to single wave mode, the velocity of one wave increases first but then drops substantially leading to an uncoupled front, whereas, the other wave first slows down and then catches up transitioning into a stable detonation wave. Even though kerosene helps sustain a detonation wave in a lean hydrogen-air mixture which otherwise is unstable, the detonation wave that decays has insufficient available hydrogen and highly rich kerosene vapor ahead of it and this causes weakening the shock front. Upon stabilization, the resultant single propagating front remains as a hydrogen-driven and kerosene-supported detonation wave.

engineering, aerospace
Mode-locked rotating detonation waves: Experiments and a model equation

James Koch,Mitsuru Kurosaka,Carl Knowlen,J Nathan Kutz

DOI: https://doi.org/10.1103/PhysRevE.101.013106

Abstract:Direct observation of a rotating detonation engine combustion chamber has enabled the extraction of the kinematics of its detonation waves. These records exhibit a rich set of instabilities and bifurcations arising from the interaction of coherent wave fronts and global gain dynamics. We develop a model of the observed dynamics by recasting the Majda detonation analog as an autowave process. The solution fronts become attractors of the engine, i.e., mode-locked rotating detonation waves. We find that denotative energy release competes with dissipation and gain recovery to produce the observed dynamics and a bifurcation structure common to other driven-dissipative systems, such as mode-locked lasers.
Rotating detonation in a ramjet engine three-dimensional modeling

N.N. Smirnov,V.F. Nikitin,L.I. Stamov,E.V. Mikhalchenko,V.V. Tyurenkova

DOI: https://doi.org/10.1016/j.ast.2018.08.003

IF: 5.457

2018-10-01

Aerospace Science and Technology

Abstract:A rotating detonation engine (RDE) combustion chamber fed by hydrogen–air mixtures of different composition was modeled numerically using 3D geometry. The RDE is a new type of engines capable to create higher thrust than the traditional ones based on the combustible mixture deflagration process. The dynamical process of combustion in the RDE is more than 100 times faster than that for the classical slow deflagration combustion mode. This type of engine has a more efficient thermodynamic cycle. In numerical experiments, different combustible mixture compositions were tested, and different scenarios of the engine performance were obtained. The computational domain used a regular mesh of uniform cubic elements. The time-consuming parts of the numerical code were parallelized using the OpenMP technique. Our calculations were made at APK-5 with a peak performance of 5.5 Tera Flops.

engineering, aerospace
Effects of Injection Conditions on the Stability of Rotating Detonation Waves

S. Zhang,S. Yao,M. Luan,L. Zhang,J. Wang

DOI: https://doi.org/10.1007/s00193-018-0854-9

IF: 1.903

2018-01-01

Shock Waves

Abstract:This article presents a numerical investigation of a rotating detonation engine (RDE). The simulation explores the instability mechanism of detonation waves in the RDE with micro-convergent-nozzle injection. The process is modeled by the two-dimensional reactive Euler equations with detailed chemical reaction kinetics for the injection of premixed stoichiometric hydrogen–air. The numerical results show an interesting instability phenomenon whereby an unstable detonation wave rotates circumferentially at the fuel injection head of the chamber. The shape of the fresh fuel layer is irregular, which is different from that in previous numerical simulations. The height and strength of the detonation wave are periodically fluctuating, as well as the mass flow rate of the reactants into the chamber. Based on the time evolution of the detonation wave, it is found that the detonation wave oscillates due to the interaction of fuel injection and weak transverse shock waves following the detonation wave. The detonation wave, the shape of the fresh fuel layer, and the mass flow rate influence each other. Therefore, this oscillation remains in the flow field, as does the instability of the detonation wave. This finding is in good agreement with previous experiments.
Stability investigation of two-phase n-decane rotating detonation waves

Ningbo Zhao,Xiaofeng Shao,Hongtao Zheng

DOI: https://doi.org/10.1016/j.ast.2023.108817

IF: 5.457

2024-01-01

Aerospace Science and Technology

Abstract:In this paper, three-dimensional rotating detonation combustor fuelled by n-decane sprays is numerically investigated with Eulerian-Lagrangian method. The flow field characteristics, the effects of injection total pressure and oxygen mass fraction on the stability of two-phase rotating detonation wave are analysed. The results show that the mixing-dominance and the reaction-dominance are two mechanisms affecting the stability of two-phase rotating detonation wave. Specifically, injection total pressure mainly affects the fuel mixing in non-premixed configuration. Increasing the total pressure improves the droplet evaporation, such as the reduce of the droplet evaporation distance, Sauter mean diameter and the rise of droplet evaporation rate. Besides, the stability of two-phase rotating detonation wave is nonlinear, the highest stability happens in 1.5MPa, which is due to the collision of shock wave and rotating detonation wave. On the other hand, oxygen mass fraction has a significant effect on the reactivity of reactant and leads to the wave propagation mode transition. The increasing of oxygen mass fraction broadens the high reaction rate zone, which provides a suitable environment for the generation of local explosions. The local explosions gradually develop into detonation waves and form multi-wave mode after a complex self-adjusted process. Moreover, the stability of two-phase rotating detonation wave is in proportion to the oxygen mass fraction. As the increase of oxygen mass fraction, the fluctuations of pressure and detonation speed tend to be smooth, which implied the higher stability in multi-wave mode. The analysis about stability of RDW may be beneficial to the design of two-phase rotating detonation engines.

engineering, aerospace

Mathematical modeling of a rotating detonation wave in a hydrogen-oxygen mixture

Three-dimensional modeling of rotating detonation in a ramjet engine

Rotating Detonation Wave in an Annular Gap

Numerical Study of the Reverse-Rotating Waves in Rotating Detonation Engine with a Hollow Combustor

Numerical investigation of detonation initiation in a modeled rotating detonation engine

Quasi-Two-Dimensional Simulation of a Rotating Detonation Engine Combustor and Injector

Investigation of Rotating Detonation Waves in an Annular Gap

Numerical Simulation of Oblique Detonation Initiation by a High-Velocity Projectile Flying in a Hydrogen–Air Mixture

Analysis of Waves Dynamics in a Rotating Detonation Combustor Fueled by Kerosene

A Quasi-one-dimensional Analytic Model of Rotating Detonation Combustors

Origin and chaotic propagation of multiple rotating detonation waves in hydrogen/air mixtures

Numerical Study on the Instabilities in H2-air Rotating Detonation Engines

Rotating Detonation Instabilities in Hydrogen-Oxygen Mixture

Numerical investigation of flow structures with an oblique detonation wave in a hypersonic annular cylindrical chamber

Numerical Simulation of Wave Mode Transition in Rotating Detonation Engine with OpenFOAM

Modeling thermodynamic trends of rotating detonation engines

Simulation of wave mode switching in a rotating detonation engine with gaseous and liquid fuel

Mode-locked rotating detonation waves: Experiments and a model equation

Rotating detonation in a ramjet engine three-dimensional modeling

Effects of Injection Conditions on the Stability of Rotating Detonation Waves

Stability investigation of two-phase n-decane rotating detonation waves