Abstract:Numerical simulations with detailed chemistry are conducted for two-dimensional rotating detonative combustion with separate injection of fuel and oxidant. The influences of the fuel and oxidant compositions on combustion mode and detonation wave multiplicity are studied. It is found that in the parts of the flow beyond the fuel refill zone, there are two distinct, highly inhomogeneous zones with fuel-rich and fuel-lean compositions, respectively. Both detonative and deflagrative regimes are observed and proceed mostly under a premixed combustion mode with the deflagration confined mostly to the fuel-lean zone. The results from our simulations show that limited H2 is detonated or deflagrated close to stoichiometric conditions and more than 70% of H2 is detonated or deflagrated under fuel-lean conditions. Over 70% of the detonated H2 is consumed in a premixed combustion mode. Our analysis also suggests that the detonation fraction increases with increased inlet pressure, decreased inlet temperature or increased injection orifice number. Additionally, the range of mixture fraction over which the composition is detonable is narrower than the range for deflagration. The number of detonation waves increases with increased oxygen mass fraction in the oxidant stream, with the additional waves being formed by mutual enhancement of an explosive hot spot and a travelling shock wave. Stabilization of the multiple waves follows a chaotic period involving both co-rotating and counter-rotating waves. Furthermore, the deficit of the detonation speed relative to the ideal Chapman−Jouguet value increases with the number of waves but also decreases monotonically with the level of reactant mixing. The reactant mixing effects along the detonation wave height are further discussed through quantifying the statistics of height-wise mixture fraction, heat release rate and OH mass fraction.

Numerical Simulation of Wave Mode Transition in Rotating Detonation Engine with OpenFOAM

Operational Mode Transition in a Rotating Detonation Engine

Numerical investigation of detonation initiation in a modeled rotating detonation engine

Numerical Study of the Reverse-Rotating Waves in Rotating Detonation Engine with a Hollow Combustor

Investigation of Counter-Rotating Shock Wave Phenomenon and Instability Mechanisms of Rotating Detonation Engine with Hollow Combustor and Laval Nozzle

Analysis of Waves Dynamics in a Rotating Detonation Combustor Fueled by Kerosene

Numerical Investigation of a Rotating Detonation Engine under Premixed/non-Premixed Conditions

Numerical Research on the Propagation Characteristics and Evolution Mechanisms of Rotating Detonation Waves with the Spatial Fluctuation of Inlet Total Pressure

Simulation of wave mode switching in a rotating detonation engine with gaseous and liquid fuel

Numerical Investigation on New Engine Combustion Charactristic of Helicopter

Formation of Multiple Detonation Waves in Rotating Detonation Engines with Inhomogeneous Methane/oxygen Mixtures under Different Equivalence Ratios

Multiple Ignitions and the Stability of Rotating Detonation Waves

Numerical investigation of two-wave collision and wave structure evolution of rotating detonation engine with hollow combustor

Combustion Mode and Wave Multiplicity in Rotating Detonative Combustion with Separate Reactant Injection

Investigating Rotating Detonation Mode Fueled by Precombustion Cracking Gas

Numerical Study on the Instabilities in H2-air Rotating Detonation Engines

The Behavior of the Propagating Velocity of Rotating Detonation Waves and Counter-Rotating Shock Waves in a Hollow Combustor

Numerical research on kerosene/hydrogen/air rotating detonation engines with discrete injection strategies

Numerical Simulation of Deflagration to Detonation Transition of Two-phase Detonation Wave

Visual experimental research on the propagation instabilities in a plane-radial rotating detonation engine

Quasi-Two-Dimensional Simulation of a Rotating Detonation Engine Combustor and Injector