Abstract:Rotating detonation engines (RDEs) are the most promising pressure-gain combustion devices, but their long-duration operations are hindered by the harsh thermal environment inside the chamber. This study analyzes the instantaneous and average heat loads on chamber walls of RDEs based on the newly developed unsteady conjugate heat transfer (CHT) OpenFOAM solver named multiRegionBYRFoam. To enhance accuracy in predicting heat transfer characteristics compared to decoupled simulations focusing solely on fluid or solid behavior, three-dimensional CHT simulations are conducted for a premixed H2/air annular RDE coupling the detonation simulation with heat conduction in both inner and outer chamber walls. The transient time evolutions of wall heat flux in RDEs are numerically captured for the first time and agree well with experiments. The calculated peak wall heat flux is 1.98 MW/m2 at the inner wall and 2.63 MW/m2 at the outer wall when a single detonation wave propagates with a mass flow rate of 0.227 kg/s. By investigating the influence of inlet flow conditions and detonation modes, valuable guidelines on designing efficient thermal management systems for RDEs are obtained: larger mass flow rates and multi-wave modes result in higher average wall heat flux; the heat flux at the outer wall exceeds that at the inner wall while both walls require effective cooling for gas turbine engines with a rotating detonation combustor. Furthermore, a novel heat transfer model for RDEs is proposed based on a thermal operation map depicting total heat transfer rates to describe the nonlinear impact of mass flow rate and number of detonation waves, which can be employed to predict total wall heat loads under specific operation conditions of RDE.

3-D simulation of rotating detonation wave in combustion chambers without inner wall

Numerical Study of the Reverse-Rotating Waves in Rotating Detonation Engine with a Hollow Combustor

Rotating Detonation Wave in an Annular Gap

Three-dimensional modeling of rotating detonation in a ramjet engine

Three-dimensional Numerical Investigations of the Rotating Detonation Engine with a Hollow Combustor

Quasi-Two-Dimensional Simulation of a Rotating Detonation Engine Combustor and Injector

Numerical Investigation of Shock Wave Reflections Near the Head Ends of Rotating Detonation Engines

Experimental investigation on air-breathing continuous rotating detonation engine in the cavity-based combustor

Numerical simulation of radial-stratified rotating detonation flow field structures with different injection patterns

Three-dimensional Numerical Study on Rotating Detonation Engines Using Reactive Navier-Stokes Equations

Analysis on the radial structure of rotating detonation wave in a hollow combustor

Numerical research on kerosene/hydrogen/air rotating detonation engines with discrete injection strategies

Numerical investigation of two-wave collision and wave structure evolution of rotating detonation engine with hollow combustor

Numerical Investigation of Flow Particle Paths and Thermodynamic Performance of Continuously Rotating Detonation Engines

Numerical Simulation of Continuous Rotating Detonation Engine in Column Coordinate

Numerical investigation of detonation initiation in a modeled rotating detonation engine

Analysis of Waves Dynamics in a Rotating Detonation Combustor Fueled by Kerosene

Two Dimensional Simulation of Continuous Detonation Engine

Particle Path Tracking Method In Two- And Three-Dimensional Continuously Rotating Detonation Engines

Unsteady Conjugate Heat Transfer Simulation of Wall Heat Loads for Rotating Detonation Combustor

Three-Dimensional Numerical Study of Flow Particle Paths in Rotating Detonation Engine with a Hollow Combustor