Abstract:It is well known that welding produces thermal stresses which cause distortion of structures and residual stresses which influence buckling strength and brittle fracture strength of welded structures. Cold cracking of the weldment has beem investigated from a mechanical point of view with special attention paid to thermal stresses induced during the cooling stage of a welding thermal cycle.For a better analysis on these subjects, it is necessary to obtain more accurate information on the entire histories of stresses and strains to which the material is subjected during the process of welding. At the instant of welding, a limited portion of the welded joint such as the weldment and the base metal in its vicinity is heated to a very high temperature and therafetr cooled down to room temperature. The thermal cycle proceeds, the temperature distribution changes with time and the mechanical properties of the metals depend on temperature. In order to perform a more reliable analysis, the above mentioned factors should be taken into account. However, there are many difficulties in analysing theoretically practical models, including these effects, by classical methods, and there are only a few reports of their analysis based on simplified assumptions, such as regarding the problem as one dimensional problem or neglecting most of tempe-rature-dependent factors.The authors developed a method of theoretical analysis on this problem based on the finite element method, with consideration of the effects of changes in modulus of elasticity, yield stress and coefficient of expansion of the metal which are dependent on temperature under the assumption that problem is regarded as quasi-static, so that there is no interaction between temperature distribution and stress one. Accordingly, the temperature analysis is carried out independently before the stress analysis. As both analyses take incremental procedure, they can take into consideration of the effects of experience of the material before a stage at the following step of computation. if necessary, such as the rate of cooling on phase transformation, peak temperature on the mechanical properties, etc. in addition to the above mentioned temperature dependent properties. Examples of calculation given here are thermal stresses induced in butt welded joint under a moving electorode and local stresses and strains in RRC specimens during thermal cycle, and they show the usefulness of the method to general cases of welding.

Thermal stresses and computational welding mechanics

Modeling Heat Transfer During Friction Stir Welding Using a Meshless Particle Method

An Eulerian thermomechanical elastic–viscoplastic model with isotropic and directional hardening applied to computational welding mechanics

Multiphysics Study of Thermal Profiles and Residual Stress in Welding

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

Thermal-mechano-metallurgical coupled analysis of welding residual stress

Establishment and Application of Material Models for Numerical Simulation of Welding Process

Analytical and FEM models for thermal analysis and residual stresses using wire arc-based welding and additive manufacturing of SUS304

A computationally efficient thermo-mechanical model for wire arc additive manufacturing

Analytical Model for Three-Dimensional Non-Uniform Temperature Field and Welding Stress of Thick Plates Via Friction Stir Weld

Numerical Analysis and Analytical Modeling of the Spatial Distribution of Heat Flux During Friction Stir Welding

Numerical and experimental study on thermal-metallurgical-mechanical behavior of high-strength steel welded joint

Heat generation, plastic deformation and residual stresses in friction stir welding of aluminium alloy

Welding-induced stresses and distortion in high-strength steel T-joints: Numerical and experimental study

High precision modeling of welding and post welding cold rolling continuous process in numerical simulation

A physically consistent 2D residual stress model for approximating 3D effects in welding

Sensitivity Analysis of History Dependent Material Mechanical Models for Numerical Simulation of Welding Process

Current Studies on Thermal Models of Friction Stir Welding

Optimization‐improved thermal–mechanical simulation of welding residual stresses in welded connections

Physically-based constitutive modelling of residual stress development in welding of aluminium alloy 2024

Analysis of Thermal Elastic-Plastic Behavior of Metals during Welding by Finite Element Method