Abstract:Additive manufacturing, particularly Wire Arc Additive Manufacturing (WAAM), provides numerous advantages for the production of near net shape components, since it combines a high productivity with a reduced material waste. It is of major interest when working with expensive materials such as titanium alloy Ti-6Al-4V, commonly used in aerospace. Due to high temperature gradients WAAM is very susceptible to high residual stresses and hence, distortion problems. In order to avoid extensive experimental parameter studies in the design phase to mitigate these issues, a process design based on numerical simulation is favourable. However, accurate estimations up to now necessitate the implementation of transient multi-physics models, which may not be effective when applied to large structures because of their associated large computational time. Consequently, there is a clear need for faster numerical models, especially when path planning optimization is targeted. A promising very fast approach to solve this problem is the so-called inherent strain formulation. However, the original inherent strain formulation is hard to implement in certain commercial finite element (FE) software packages, since strain data is harder to access than stress data. In addition, the original approach requires the modification of the FE solver itself, and hence needs to be adapted for each FE analysis software package individually, which is not only inefficient but might lead also to different results. To overcome these issues a more universally applicable and non-intrusive incremental Inherent Stress formulation that can be incorporated to any commercial finite element solver has been developed within this work. Within the modelling approach the additive manufacturing of a representative component is simulated bead by bead, with the addition of each new bead corresponding to a linear elastic problem that can be rapidly solved. Furthermore, the model incorporates the temperature dependency of the Young's modulus during heating and cooling cycles to better account for thermo-mechanical coupling. Evolution of inherent stress during the deposition of successive layers is also introduced to increase the fidelity of the model. The validity of the model was assessed using two stiffened representative geometries with different complexity. In both cases, a major reduction in computational up to 98 % is observed, with a corresponding displacement error of 20 % in the worst-case scenario, thus constituting an interesting tool to evaluate distortion trends.

Analytical and FEM models for thermal analysis and residual stresses using wire arc-based welding and additive manufacturing of SUS304

Assessing the Residual Stresses in Dissimilar Welded Joint: Depth-Sensing Indentation Testing and Numerical Simulation

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

Heat generation, plastic deformation and residual stresses in friction stir welding of aluminium alloy

Numerical Simulation of Residual Stress and Deformation in Wire Arc Additive Manufacturing

A computationally efficient thermo-mechanical model for wire arc additive manufacturing

Influence of Material Model on Prediction Accuracy of Welding Residual Stress in an Austenitic Stainless Steel Multi-pass Butt-Welded Joint

Numerical Simulation of Welding for Residual Stress Prediction of Low Carbon Steel

Numerical simulation of thermal and stress fields for multilayer and multi-pass weaving WAAM of magnesium alloy

Finite element analysis, prediction, and optimization of residual stresses in multi-pass arc welding with experimental evaluation

Numerical and experimental validation of gas metal arc welding on AISI 441 ferritic stainless steel through mechanical and microstructural analysis

Modeling of welding residual stress in a dissimilar metal butt-welded joint between P92 ferritic steel and SUS304 austenitic stainless steel

Multiphysics Study of Thermal Profiles and Residual Stress in Welding

Distortion Analysis Method for Wire Arc Additive Manufacturing Component Using Thermomechanical Computation with Enhanced Separation and Deposition Algorithm

Incremental inherent stress model for the fast prediction of part distortion made via wire arc additive manufacturing

Toward large-scale simulation of residual stress and distortion in wire and arc additive manufacturing

Simulation and analysis of electron beam welding residual stress in thin-walled high-temperature alloy aeroengine structures

Temporally continuous thermofluidic-thermomechanical modeling framework for metal additive manufacturing

Analytical Modeling of Residual Stress in Laser Powder Bed Fusion Considering Part’s Boundary Condition

Three-dimensional finite element modelling of welding residual stresses of medium carbon steel pipes with consideration of solid-state austenite-martensite transformation and post-weld heat treatment

Numerical Simulation of the Stress-Strain State of a PAW-MIG-Welded 1561 Aluminum Alloy Butt Joint Produced Under Different Process Modes