Abstract:Additive manufacturing (AM) is used in many fields and is a method used to replace wood components or wood-jointed furniture components in the furniture industry. Replacing wood joints by 3D printed connectors would be an advantage, considering the fact that during the process of assembling furniture, the execution technology of the joints is difficult, time-consuming, and labor-intensive. Advanced technology of AM applied in furniture manufacturing helps the designers to create new concepts of product design, with no limits of shape, number of joints, color, or size. The diversity of 3D printers and AM technologies provides the selection of materials in relation with the applicability of the 3D printed object. In this respect, the objective of the present research is to design a 3D printed connector to be used for jointing three chair components, namely the leg and two stretchers made from larch (Larix decidua Mill.) wood, and to use reinforced polylactic acid (PLA) fiberglass (20 wt. %) filament for 3D printing this connector using AM with fused filament fabrication (FFF) technology. The design of the connector, the possibility of using this type of material, and the deposition method of filament were investigated in this research. For this purpose, several evaluation methods were applied: microscopic investigation with 50×, 100×, and 200× magnifications, both of the filament and of the 3D printed connector; mechanical testing of corner joint formed with the help of connector between chair leg and the two stretchers; and a microscopic investigation of the connectors’ defects that occurred after applying the compression and tensile loads on the diagonal direction of the L-type joint. The microscopic investigation of the composite filament revealed the agglomerations of glass fibers into the core matrix and areas where the distribution of the reinforcements was poor. The heterogeneous structure of the filament and the defects highlighted in the 3D printed connectors by the microscopic investigation contributed to the mechanical behavior of L-type connecting joints. The bending moments resulting from compression and tensile tests of the 3D printed connectors were compared to the results recorded after testing, under the same conditions, the normal mortise–tenon joint used to assemble the abovementioned chair components. The larch wood strength influenced the mechanical results and the conclusions of the microscopic investigations, as well as the analysis of the broken connectors after testing recommended the change of connector design and filament deposition direction.

3D Printing Application in Wood Furniture Components Assembling

Application of 3D Printing Technology in Furniture Construction

Study on the application of 3D printing to wooden furniture connectors

Custom design of furniture elements by fused filament fabrication

Design and structural analysis of 3D-printed modular furniture joints

Performance of Wood Dowels and Same Size Metallic Connectors Used for Furniture Joints

Additive manufacturing of mechanical testing samples based on virgin poly (lactic acid) (PLA) and PLA/wood fibre composites

Adhesive- and Metal-Free Assembly Techniques for Prefabricated Multi-Layer Engineered Wood Products: A Review on Wooden Connectors

An assessment of PLA/wood with PLA core sandwich multilayer component tensile strength under different 3D printing conditions

Study of the manufacturing process effects of fused filament fabrication and injection molding on tensile properties of composite PLA-wood parts

Mechanical Properties of Wooden Elements with 3D Printed Reinforcement from Polymers and Carbon

Elements of Designing Upholstered Furniture Sandwich Frames Using Finite Element Method

A Design and Fabrication Method for Wood-Inspired Composites by Micro X-Ray Computed Tomography and 3D Printing

Strength and failure assessments of 3D printed PLA single lap joints: Experimental and numerical analysis

Finite Element Method Application in Computer-Aided Design for Bio-mimetic Chair Research

Property enhancement of 3D printed of timber waste/PLA composite by surface coating

Pattern optimization for 3D printing of composite filament materials with natural fibers and polylactic acid

Wood-based 3D printing: potential and limitation to 3D print building elements with cellulose & lignin

The design and evaluation of three-dimensional corner joints used in wooden furniture frames: Experimental and numerical

Strength improvement and failure analysis of dissimilar FDM printed single-lap joints with tailored interface geometry

A Parametric Optimized Method for Three-Dimensional Corner Joints in Wooden Furniture