Abstract:The effect of two superplasticizers (SPs) with various equivalent (eq.) alkali contents (i.e., with 0.00009% and 4.1% of Na2Oeq, respectively) on the development of an alkali-silica reaction (ASR) was investigated through the use of multilevel assessment. This testing protocol showed promising results for evaluating concrete damage due to ASRs based on mechanical and microscopical testing protocols, specifically the stiffness damage test (SDT) and the damage rating index (DRI). Concrete specimens that incorporated the aforementioned SPs and distinct reactive aggregates (coarse and fine) were manufactured and then stored in conditions that enabled ASR development and were monitored over time. Upon reaching the desired expansion levels of this study, the concrete specimens were prepared for the multilevel assessment. The results show that the SP-incorporated concrete specimens with lower and higher alkali content yielded lower and higher deterioration results, respectively. This clearly confirms that while SP-incorporated concrete that contains SPs with a higher alkali content could increase the risk of ASR deterioration, those SPs with a very low amount of alkali content could act as a mitigation strategy against ASRs. Finally, an investigation into the influence of distinct SPs on the chemical composition of an ASR gel was conducted, which confirmed that the SP with a higher alkali content had the highest potential for further deterioration.

Alkali–silica reaction in plain and fibre concretes in field conditions

Comparison of Field Observations with Laboratory Test Results on Concretes Undergoing Alkali-Silica Reaction

Alkali-silica reaction (ASR) in concrete structures: Mechanisms, effects and evaluation test methods adopted in the United States Case Studies in Construction Materials

Alkali-silica reaction (ASR) and alkali-carbonate reaction (ACR) in activated blast furnace slag cement (ABFSC) concrete

Concrete Expansion Induced by Alkali–Silica Reaction in a Small Arch Dam

ASR performance of concrete at external alkali supply – effects of aggregate mixtures and blended cement

Failure criteria and microstructure evolution mechanism of the alkali–silica reaction of concrete

Numerical and experimental study of ASR in concrete at the meso-level

Time-dependent Effect of Expansion due to Alkali-silica Reaction on Mechanical properties of Concrete

Microscopic investigation of building materials affected by alkali-silica reaction

Effect of cement composition and the storage conditions on the morphology of ASR products in concrete

INVESTIGATION OF FACTORS INFLUENCING THE EXPANSIVE BEHAVIOUR, COMPRESSIVE STRENGTH AND MODULUS OF RUPTURE OF ALKALI-SILICA REACTIVE CONCRETE USING LABORATORY CONCRETE MIXES

Alkali-silica reaction (ASR) in carbonate rocks

Alkali-silica reaction – a multidisciplinary approach

Strength and Deformation Properties of Alkali-Silica Reaction (ASR) Damaged Concrete Exposed to External Alkalis

Alkali-Silica Reaction in concrete pavements considering traffic and de-icing agents

The Impact of Distinct Superplasticizers on the Degradation of Concrete Affected by Alkali-Silica Reaction (ASR)

Alkali silica reaction in concrete - Revealing the expansion mechanism by surface force measurements

Alkali Silica Reaction Expansion and Mechanical Properties of Concrete Containing Glass Aggregate with Different Sizes

Residual alkali–silica reaction of coarse recycled concrete aggregate based on the application of a prescriptive measure from the Argentinian regulation

Changes in mechanical properties and durability indices of concrete undergoing ASR expansion