Abstract:Many preventive measures showed improved performance of concrete against alkali-silica reaction (ASR) based on the concrete prism test (CPT) described in the Canadian and American Standards, CSA A23.2-14A and ASTM C1293. However, research has shown that preventive measures that limited the 2-year expansion in the concrete prism test produced late expansion after 7-15 years when tested in the field. The objective of this research is to understand the possible reasons for this late expansion under field conditions and to come up with modified approach to determine the level of supplementary cementing materials (SCM) needed to mitigate the long-term expansion. The research mainly focuses on studying two possible reasons to explain the late expansion. The first reason is the rate and ultimate hydration of SCM, where their capacity to bind alkalis under CPT could be higher than those under field conditions. The other reason for the late expansion could be the geometry and size of the CPT samples which might reduce the expansion due to the excessive alkali leaching. Larger samples showed less leaching compared to standard prisms. 100-mm cylinders showed higher expansion than 75-mm standard prisms; however, both sample shapes showed similar expansions for one tested aggregate when used with SCM. In addition, the capacity of SCM to bind alkalis was shown to be higher at 38oC compared to the other two tested temperatures investigated in this study: 23oC and 60oC. Samples with SCM at high replacement levels expanded more at 60oC compared to 38oC. Due to their reduced leaching compared to prisms, testing cylinders at 60oC showed accelerated results reducing the testing duration to one year compared to the standard test duration of two years. Moreover, a new way to predict the minimum levels of SCM required to mitigate expansion due to alkali-silica reaction is presented showing better correlation with the field. Finally, a fast and reliable test method is suggested to evaluate the reactivity of mineral fillers by adapting and adopting the current test methods available for ASR testing.

The Impact of Distinct Superplasticizers on the Degradation of Concrete Affected by Alkali-Silica Reaction (ASR)

Comparison of Field Observations with Laboratory Test Results on Concretes Undergoing Alkali-Silica Reaction

Failure criteria and microstructure evolution mechanism of the alkali–silica reaction of concrete

Alkali-silica reaction (ASR) in concrete structures: Mechanisms, effects and evaluation test methods adopted in the United States Case Studies in Construction Materials

Time-dependent Effect of Expansion due to Alkali-silica Reaction on Mechanical properties of Concrete

Alkali-silica reaction resistance versus susceptibility of geopolymer binders

Alkali-silica reaction (ASR) and alkali-carbonate reaction (ACR) in activated blast furnace slag cement (ABFSC) concrete

A Multiscale and Multimethod Approach to Assess and Mitigate Concrete Damage due to Alkali–Silica Reaction

Relation between mechanical properties of concrete and alkali-silica reaction (ASR); a review

Alkali-silica reaction (ASR) detection in concrete from frequency dependent ultrasonic attenuation

Influence of enforced carbonation on alkali-silica reaction: performance and multi-scale mechanisms

Pozzolanic Reactivity of High-Alkali Supplementary Cementitious Materials and Its Impact on Mitigation of Alkali-Silica Reaction

Microscopic investigation of building materials affected by alkali-silica reaction

Effect of ASR related expansion in the concrete due to alkali concentration and total amount of alkali

Experimental study on the effect of cement alkali content on concrete ASR

Alkali–silica reaction in plain and fibre concretes in field conditions

Expansion and Mitigation of Alkali-Silica Reaction in Binary Blended Concrete Confining Potentially Reactive Aggregates

Development of Enhanced Test Methods to Evaluate Alkalisilica Reaction in Concrete

The Effect of Alkali-Silica Reaction (Asr) on the Mechanical Properties of Concretes Containing Trass

Influences of aggregate gradation on alkali-silica reaction of seawater and sea sand concrete

INVESTIGATION OF FACTORS INFLUENCING THE EXPANSIVE BEHAVIOUR, COMPRESSIVE STRENGTH AND MODULUS OF RUPTURE OF ALKALI-SILICA REACTIVE CONCRETE USING LABORATORY CONCRETE MIXES