Abstract:This work presents an auxetic hexachiral cantilever substrate for low-frequency vibration energy harvesting applications. Auxetics are materials with negative Poisson's ratio that develop stresses of the same nature under mechanical loading, which can be advantageously used in designing energy harvesters with enhanced power output. The proposed harvester is fabricated by attaching a piezo patch on a 3D printed polylactic acid (PLA) hexachiral substrate to convert the mechanical response to electrical output. Experiments are conducted to characterize the vibration and electrical properties of the harvester. A 3D finite element (FE) model is developed and validated with experimental voltage obtained for different electrical resistance. As the first mode generates maximum power, an equivalent single degree of freedom (SDOF) semi-analytical model is formulated and validated with experiments and FE results. The proposed harvester has a natural frequency of 23 Hz with a voltage output of 9.1 V at 250 kΩ. The developed models are used to study the influence of hexachiral geometry, electrical and mechanical loading on the electro-mechanical response. The harvester voltage is influenced by the ligament thickness and is found to increase linearly with an increase in mechanical loading. Further, the enhancement in performance by the addition of hexachiral sub patch to a plain beam is investigated, followed by a comparison with harvesters having plain, hexagonal and re-entrant geometries. The results show that the hexachiral harvester has the lowest first mode frequency with a power output about 20 and 3 times the plain and re-entrant harvesters, respectively. Finally, random vibration analysis of the hexachiral harvester is carried out to evaluate its performance under ambient loading, and the results show that the semi-analytical model is a computationally efficient alternative to study the first mode behavior. The findings of the study demonstrate the potential of the proposed hexachiral harvester for low-frequency applications.

Fabrication of micro-cantilever and its theoretical validation for energy harvesting applications

Simulation and Design of Piezoelectric Microcantilever Chemical Sensors

Comprehensive simulation study on AlN, ZnO, and PZT-5H piezoelectric materials for microcantilever-based MEMS energy harvesters: Mechanical and electrical insights

Micro Fabrication Development of a Vibration-Based Sputtered PZT Thin Film Micro Energy Harvester

Low frequency piezoelectric P(VDF-TrFE) micro-cantilevers with a novel MEMS process for vibration sensor and energy harvester applications

Piezoelectric MEMS Energy Harvester for Low-Power Applications

Electromechanical Finite Element Analysis For Designed Low-Frequency Mems Piezoelectric Vibration Energy Harvester

Interdigitated-electrode-based MEMS-scale piezoelectric energy harvester modeling and optimization using finite element method

A Nail-Size Piezoelectric Energy Harvesting System Integrating a MEMS Transducer and a CMOS SSHI Circuit

Fabrication and property of flexible macro fiber composites for vibration-based energy harvesting

Fabrication and characterization of MEMS-based PZT/PZT bimorph thick film vibration energy harvesters

Fabrication of Spiral-Shaped PVDF Cantilever Based Vibration Energy Harvester

MEMS piezo cantilever for vibration energy harvesting

Auxetic hexachiral cantilever beams for piezoelectric vibration energy harvesting

Design and experimentation of meandered low frequency broadband piezoelectric energy harvester with resonant tuning

Optimization of cantilevered piezoelectric energy harvester with a fixed resonance frequency

MODELING AND SIMULATION OF PIEZOELECTRIC MEMS ENERGY HARVESTING DEVICE

Design analysis, modeling and simulation of novel rectangular cantilever beam for MEMS sensors and energy harvesting applications

Effect of single-side stroke limiter on cantilever-based piezoelectric energy harvesting from low frequency vibrations

A vibration-based MEMS piezoelectric energy harvester and power conditioning circuit

Fabrication and Characterization of Piezoelectric Cantilever for Micro Transducers