Abstract:This work presents an auxetic hexachiral cantilever substrate for low-frequency vibration energy harvesting applications. Auxetics are materials with negative Poisson's ratio that develop stresses of the same nature under mechanical loading, which can be advantageously used in designing energy harvesters with enhanced power output. The proposed harvester is fabricated by attaching a piezo patch on a 3D printed polylactic acid (PLA) hexachiral substrate to convert the mechanical response to electrical output. Experiments are conducted to characterize the vibration and electrical properties of the harvester. A 3D finite element (FE) model is developed and validated with experimental voltage obtained for different electrical resistance. As the first mode generates maximum power, an equivalent single degree of freedom (SDOF) semi-analytical model is formulated and validated with experiments and FE results. The proposed harvester has a natural frequency of 23 Hz with a voltage output of 9.1 V at 250 kΩ. The developed models are used to study the influence of hexachiral geometry, electrical and mechanical loading on the electro-mechanical response. The harvester voltage is influenced by the ligament thickness and is found to increase linearly with an increase in mechanical loading. Further, the enhancement in performance by the addition of hexachiral sub patch to a plain beam is investigated, followed by a comparison with harvesters having plain, hexagonal and re-entrant geometries. The results show that the hexachiral harvester has the lowest first mode frequency with a power output about 20 and 3 times the plain and re-entrant harvesters, respectively. Finally, random vibration analysis of the hexachiral harvester is carried out to evaluate its performance under ambient loading, and the results show that the semi-analytical model is a computationally efficient alternative to study the first mode behavior. The findings of the study demonstrate the potential of the proposed hexachiral harvester for low-frequency applications.

MEMS piezo cantilever for vibration energy harvesting

A vibration-based MEMS piezoelectric energy harvester and power conditioning circuit

Fabrication and performance evaluation of a metal-based bimorph piezoelectric MEMS generator for vibration energy harvesting

MODELING AND SIMULATION OF PIEZOELECTRIC MEMS ENERGY HARVESTING DEVICE

A MEMS-scale vibration energy harvester based on coupled component structure and bi-stable states

Piezoelectric MEMS Energy Harvester for Low-Power Applications

Micro Fabrication Development of a Vibration-Based Sputtered PZT Thin Film Micro Energy Harvester

Multimodal MEMS Vibration Energy Harvester with Cascaded Flexible and Silicon Beams for Ultralow Frequency Response

Low Frequency Wide Bandwidth MEMS Energy Harvester Based on Spiral-Shaped PVDF Cantilever

Enhanced performance on piezoelectric MEMS vibration energy harvester by dynamic magnifier under impulsive force

High performance bimorph piezoelectric MEMS harvester via bulk PZT thick films on thin beryllium-bronze substrate

Electromechanical Finite Element Analysis For Designed Low-Frequency Mems Piezoelectric Vibration Energy Harvester

MEMS vibrational energy harvesters

Enhancement of the Piezoelectric Cantilever Beam Performance via Vortex-Induced Vibration to Harvest Ocean Wave Energy

Piezoelectric energy harvesting from extremely low-frequency vibrations via gravity induced self-excited resonance

Theoretical modeling and experimental verification of a broadband microvibrational energy harvesting system

Fabrication of Spiral-Shaped PVDF Cantilever Based Vibration Energy Harvester

Auxetic hexachiral cantilever beams for piezoelectric vibration energy harvesting

A Multi-Mode Broadband Vibration Energy Harvester Composed of Symmetrically Distributed U-Shaped Cantilever Beams

Low frequency piezoelectric energy harvesting at multi vibration mode shapes

Multimodal Design Of A Novel Mems Structure For Piezoelectric Energy Harvester