Effects of burnup on heat generation in vitrified waste from spent MOX fuel for geological disposal

Ryo Hamada,Tomofumi Sakuragi,Hidekazu Asano,Toshiro Oniki,Midori Uchiyama
DOI: https://doi.org/10.1557/s43580-022-00246-x
2022-03-01
MRS Advances
Abstract:In this study, we evaluated the amount of decay heat generated in vitrified waste from MOX fuel and the bentonite buffer temperature after disposal under different burnup conditions, assuming the waste loading in the vitrified waste was constant. The effect of burnup was calculated for two cases: (1) the initial fissile Pu content in MOX fuel was constant and (2) the initial fissile Pu content increased as the burnup increased. In case (1), the amount of decay heat generated in vitrified waste (kW/canister) decreased as the burnup increased considering the content of Am-241 in the vitrified waste decreased owing to the significant increase in the number of fission products (FP). Conversely, in case (2), the amount of heat generated in vitrified waste (kW/canister) increased as the burnup increased. Furthermore, the waste loading, for which the maximum temperature of the bentonite buffer after disposal still complies with the current upper limit of 100 °C in Japan, was found to be approximately 13 wt% (including Na2O 10 wt%).Graphical abstractThe amount of heat generated in the MOX-HLW glass as a function of time for several burnups. (a) case (1), (b) case (2). (c) Waste loading with bentonite buffer temperature below 100 °C at a burnup of 30~70 GWd/tHM for cases (1) and (2)
What problem does this paper attempt to address?