Abstract:The current policy of managing high-level waste (HLW) derived in the closed nuclear fuel cycle consists in their vitrification into B-Si or Al-P vitreous forms. These compounds have rather limited capacity with respect to the HLW (5–20 wt%), and their properties change over time due to devitrification of the glasses. Cardinal improvement in the management of HLW can be achieved by their separation onto groups of elements with similar properties, followed by their immobilization in robust waste forms (matrices) and emplacement in deep disposal facilities. One of the possible fractions contains trivalent rare-earth elements (REEs) and minor actinides (MAs = Am and Cm). REEs are the fission products of actinides, which are mainly represented by stable isotopes of elements from La to Gd as well as Y. This group also contains small amounts of short-lived radionuclides with half-lives (T1/2) from 284 days (144Ce) to 90 years (151Sm), including 147Pm (T1/2 = 2.6 years), 154Eu (T1/2 = 8.8 years), and 155Eu (T1/2 = 5 years). However, the main long-term environmental hazard of the REE–MA fraction is associated with Am and Cm, with half-lives from 18 years (244Cm) to 8500 years (245Cm), and their daughter products: 237Np (T1/2 = 2.14 × 106 years), 239Pu (T1/2 = 2.41 × 104 years), 240Pu (T1/2 = 6537 years), and 242Pu (T1/2 = 3.76 × 105 years), which should be immobilized into a durable waste form that prevents their release into the environment. Due to the heat generated by decaying radionuclides, the temperature of matrices with an REE–MA fraction will be increased by hundreds of centigrade above ambient. This process can be utilized by selecting a vitreous waste form that will crystallize to form durable crystalline phases with long-lived radionuclides. We estimated the thermal effects in a potential REE–MA glass composite material based on the size of the block, the content of waste, the time of storage before immobilization and after disposal, and showed that it is possible to select the waste loading, size of blocks, and storage time so that the temperature of the matrix during the first decades will reach 500–700 °C, which corresponds to the optimal range of glass crystallization. As a result, a glass–ceramic composite will be produced that contains monazite ((REE,MA)PO4) in phosphate glasses; britholite (Cax(REE,MA)10-x(SiO4)6O2) or zirconolite ((Ca,REE,MA)(Zr,REE,MA)(Ti,Al,Fe)2O7), in silicate systems. This possibility is confirmed by experimental data on the crystallization of glasses with REEs and actinides (Pu, Am). The prospect for the disposal of glasses with the REE–MA fraction in deep boreholes is briefly considered.

Study on the Benefit of HLLW Partitioning on the High-Level Waste Glasses from the Viewpoint of Waste Management

High burn-up operation and MOX burning in LWR; Effects of burn-up and extended cooling period of spent fuel on vitrification and disposal

Group Partitioning of Minor Actinides and Rare Earths from Highly Active Liquid Waste by Extraction Chromatography Utilizing Two Macroporous Silica-Based Impregnated Polymeric Composites

Overview of 30 Years Research on Trpo Process for Actinides Partitioning from High Level Liquid Waste

Removal of Pd(II), Zr(IV), Sr(II), Fe(III), and Mo(VI) from simulated high level liquid waste by extraction chromatography utilizing the macroporous silica-based polymeric materials

A New Partitioning Process for High-Level Liquid Waste by Extraction Chromatography Using Silica-Substrate Chelating Agent Impregnated Adsorbents

Separation of Minor Actinides and Rare Earths from a Simulated High Activity Liquid Waste by Two Macroporous Silica‐based Polymeric Composites

Ceramics for high level radioactive waste solidification

Influence of Radioactive Sludge Content on Vitrification of High-Level Liquid Waste

Analysis on the Characteristics of Geologic Disposal Waste Arising from Various Partitioning and Conditioning Options

Immobilization of a simulated HLW in phosphate based glasses/glass-ceramics by melt-quenching process

Reevaluating the efficacy of moderate annealing in nuclear waste vitrification for sustainable high-level waste management

Thermal Effects and Glass Crystallization in Composite Matrices for Immobilization of the Rare-Earth Element–Minor Actinide Fraction of High-Level Radioactive Waste

Waste forms for actinides: borosilicate glasses

OUTLOOKS OF HLW PARTITIONING TECHNOLOGIES USAGE FOR RECOVERING OF PLATINUM METALS FROM SPENT FUEL

Development of Partitioning of ~(90)sr from High Level Liquid Waste

Research on calcination thermal decomposition process of simulated high-level liquid waste based on two-step vitrification

Influence of radiation on borosilicate glass leaching behaviors

Compositional effects on the growth of diopside crystals in the simulated high‐level waste glass

Demonstration of an Improved Total Partitioning Process for High Level Liquid Waste Using Annular Centrifugal Contactors

Alpha dose rate and decay dose impacts on the long-term alteration of HLW nuclear glasses