Abstract:Ultra-low-frequency vibration is prevalent in many critical research fields. Nevertheless, for ultra-low-frequency vibration signals below 1 Hz, there is currently a lack of a cost-effective and efficient measurement method. A new ultra-low-frequency vibration signal testing method based on the passive radio frequency tag phase is proposed using the Radio Frequency Identification (RFID) sensing method. By employing vibration detection on ultra-low-frequency vibration signals, the effectiveness of the proposed approach across different frequencies is validated while thoroughly considering factors such as measurement range, precision, distance, and occlusion effects. The results indicate that this method can accurately measure ultra-low frequency vibration signals as low as 0.01 Hz, with an average relative error of only less than 1.5% for all measurement results, and the error decreases with increasing detection frequency. For the measurement of a 1 Hz vibration signal, the average relative error is less than 1%. In addition, the measurement accuracy remains unaffected by distance or occlusion. Sensitivity and stability tests are also conducted. Continuous monitoring for 8 hours demonstrates the excellent measurement stability of the proposed method. Finally, a performance comparison has been made with laser displacement sensors commonly used in non-contact ultra-low-frequency measurement methods. The results show that the RFID sensing method can detect lower vibration frequencies and has a larger amplitude measurement range and better environmental adaptability. Overall, for ultra-low-frequency vibration, this method offers advantages such as high precision, passive non-contact operation, non-line-of-sight path monitoring, affordability, and convenience. These attributes render it suitable for extensive application in various engineering scenarios requiring ultra-low-frequency vibration testing.

A precise resonance frequency measurement method based on ISO‐standardized setups for contactless chip cards

A Bridged Contactless Measurement Technique for LC Tank Based Voltage-Controlled Oscillator.

Thin‐Film‐Lithium‐Niobate Photonic Chip for Ultra‐Wideband and High‐Precision Microwave Frequency Measurement

Circuits Design for Contactless Testing of Nano-Scale CMOS Devices and Circuits

Improved Sensitivity for Subsurface Imaging by Contact Resonance Atomic Force Microscopy Using Fano Peaks

Ultrasensitive charge detection utilizing coupled nonlinear micromechanical resonators

Noncontact acousto-electromagnetic measurement of mechanical resonance in electronic systems

A Contactless Method for Measuring Amplitude and Phase of RF Voltages up to 26.5 GHz

Chip Level Measurement Technique for Capacitive RF Micromechanical Resonators

High-precision Frequency Measurement for Microresonant Sensors Based on Improved Modified Multi-Phase Clock Method.

The RF Interface Circuits Design of Contactless IC Cards

Non-contact measurement of complex permittivity based on coupled magnetic and electric resonances

Two-channel Near-field Radio Frequency Cardiac Sensor

Electromagnetic Model and Validation of Multi-point Near-field Cardiac Sensing System

High-Resolution Multiple Microwave Frequency Measurement Based on Stimulated Brillouin Scattering

A novel testing method for ultra-low-frequency vibration signal based on passive radio frequency tag sensing

Noncontact measurement of complex permittivity based on the principle of mid-range wireless power transfer

A Simple NFC RF Performance Measurement Method Based on ISO/IEC 14443 Standard

A Stepped Frequency Sweeping Method For Nonlinearity Measurement Of Microresonators

Adaptable Frequency Counter With Phase Filtering for Resonance Frequency Monitoring in Nanomechanical Sensing

Ultrasensitive Resonant Electrometry Utilizing Micromechanical Oscillators