Abstract:The relationship between von Mises equivalent stress <math>σ¯</math> and equivalent plastic strain <math>ε¯</math> (PEEQ), termed as von Mises stress-strain, plays an important role in numerical simulations for ductile fracture of structural metallic materials with large plastic strain. The standard uniaxial tensile test on cylindrical specimens is the most straightforward method to derive the (<math>σ¯−ε¯</math>) data. However, the distribution of the stress and strain along the necking section of the tensile specimen is no longer uniform in the post-necking process, which induces difficulty in acquiring the (<math>σ¯−ε¯</math>) data. The existing correction methods to identify von Mises stress-strain in the post-necking regime need instantaneous geometry of the notched region and ignore influence of the initial geometry of the specimen, which induces these methods are inconvenient for application and inapplicable for circumferentially notched tensile specimens to determine (<math>σ¯−ε¯</math>) of each individual material zone in a hybrid coupon (e.g. weldment). In the present study, influences of initial geometry of the specimen and plastic hardening property of material on necking process are investigated firstly. It is found that the shrinking behavior of the minimum cross-section of the specimen is determined by the geometric parameter of specimen and plastic hardening exponent of materials. Based on an extensive parametric study a modified power law function to characterize the von Mises stress-strain curve from tensile tests on circumferentially notched specimens without measuring instantaneous geometry of cross-section is proposed.

Model-based estimation of the stress-strain curve of metal strips

Experimental Methodology for Obtaining the Flow Curve of Sheet Materials in a Wide Range of Strains

Strain measurement by contour analysis

Simplified method to identify full von Mises stress-strain curve of structural metals

Application of machine learning-based algorithms to predict the stress-strain curves of additively manufactured mild steel out of its microstructural characteristics

Ultrasonic Measurement of Stress Considering Strain Effect

A Robust Image Processing Algorithm for Optical-Based Stress–Strain Curve Corrections after Necking

Analysis and Modeling of Stress-Strain Curves in Microalloyed Steels Based on a Dislocation Density Evolution Model

Test-and-FE-based method for obtaining complete stress-strain curves of structural steels including fracture

Modeling of Stress Spectrum Using Long-Term Monitoring Data and Finite Mixture Distributions

Multi-channel non-destructive testing of steel strip stress based on magneto-elastic effect

New Approach to Stress-Strain Curve Prediction Using Ball Indentation Test

Stress Evaluation at the Maximum Strained State by EBSD and Several Residual Stress Measurements for Plastic Deformed Austenitic Stainless Steel

Parametrisation of Uniform Deformation in Ductile Metals Using Digital Image Correlation Technology

Mesomechanical Aspects of the Strain-Rate Sensitivity of Armco-Iron Pulled in Tension

Measurement and simulation of strain fields around crack tips under mixed-mode fatigue loading

A full-range stress-strain model for metallic materials depicting non-linear strain-hardening behavior

Inverse Identification Method for Determining Stress–strain Curves of Sheet Metals at High Temperatures

Calculation method and analysis of residual stress in the strip bending roller straightening process

A Highly Sensitive Local Curvature Metrology for Internal Stress Detection in Thin Films

Stress–Strain Curve Estimation from Load–depth Curve of Spherical Indentation Test Based on Finite Element Analysis and Optimization