Abstract:The microstructure and mechanical properties of pseudo-binary (TiZrHf)50(NiCoCu)50 high entropy alloys (HEAs) with B2 matrix were investigated in this study. The studied HEAs includes Ti40Zr10Ni40Co5Cu5, Ti30Zr20Ni30Co10Cu10, Ti25Zr25Ni16.67Co16.67Cu16.67, Ti30Zr10Hf10Ni30Co10Cu10, Ti20Zr15Hf15Ni20Co15Cu15, and Ti16.67Zr16.67Hf16.67Ni16.67Co16.67Cu16.67. XRD and SEM analyses revealed that all studied HEAs were a mixture of B2 and C15 intermetallic phases, instead of a single solid solution, due to their highly negative enthalpy of mixing and the relatively large difference in atomic radii. The B2 matrix was found capable of forming a solid solution of all six elements in a wide composition range. The lattice constants of B2 and C15 phases increase linearly with increasing the difference in atomic radii. Additionally, the microhardness of these HEAs increases from 409 to 595 HV with the increasing difference in atomic radii as well. Compression tests demonstrated substitution of Zr with Hf can improve the ductility. In all studied HEAs, the Ti30Zr10Hf10Ni30Co10Cu10 HEA achieves a great balance between yield strength, ultimate compressive strength, and fracture strain of 1574 MPa, 1933 MPa, and 6.5%, respectively.<h3 class="a-plus-plus">Graphic </h3>

Solidification Microstructures of the Ingots Obtained by Arc Melting and Cold Crucible Levitation Melting in TiNbTaZr Medium-Entropy Alloy and TiNbTaZrX (X = V, Mo, W) High-Entropy Alloys

Microstructure of equiatomic and non-equiatomic Ti-Nb-Ta-Zr-Mo high-entropy alloys for metallic biomaterials

Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

Bio-Corrosion Behaviors and Bio-Compatibilities of Tinbzrta and Tinbzrtamo High Entropy Alloys

A Study of the Structure and Mechanical Properties of Nb-Mo-Co-X (X = Hf, Zr, Ti) Refractory High-Entropy Alloys

Alloy Design and Properties Optimization of High-Entropy Alloys

Effect of Nb Content on Microstructure and Mechanical Properties of Mo0.25V0.25Ti1.5Zr0.5Nbx High-Entropy Alloys

Effect of Ti Additions on Mechanical Properties of NbMoTaW and VNbMoTaW Refractory High Entropy Alloys

Microstructures and Mechanical Properties of AlCrFeNiMo 0.5 Ti X High Entropy Alloys

Microstructure and Mechanical Properties of Wire Arc Additively Manufactured MoNbTaWTi High Entropy Alloys

The microstructure and properties of Mo0.5NbTiZrTax high entropy alloys enhanced by Ta addition

Magnetron co-sputtering synthesis and nanoindentation studies of nanocrystalline (TiZrHf)x(NbTa)1−x high-entropy alloy thin films

Microstructure and Mechanical Properties of (TiZrHf)50(NiCoCu)50 High Entropy Alloys

The evolution of compositional and microstructural heterogeneities in a TaMo0.5ZrTi1.5Al0.1Si0.2 high entropy alloy

Microstructure Modification and Ductility Improvement for TaMoNbZrTiAl Refractory High Entropy Alloys via Increasing Ti Content

Microstructure and Mechanical Properties of the Ductile Al–Ti–Mo–Nb–V Refractory High Entropy Alloys

Microstructure and mechanical properties of the TiZrNbMoTa refractory high-entropy alloy produced by mechanical alloying and spark plasma sintering

SYNTHESIS AND STRUCTURE OF FOUR TiZrVNb AND FIVE-COMPONENT TiZrHfVNb REFRACTORY HIGH-ENTROPY ALLOYS

Microstructure and Corrosion Behavior of the Ti-V-Cr-Nb High-Entropy Alloys in 3.5 wt.% NaCl Solution

Effect of the Synthesis Route on the Microstructure of HfxTi(1−x)NbVZr Refractory High-Entropy Alloys

Accelerated Discovery of (TiZrHf)x(NbTa)1‐x High‐Entropy Alloys with Superior Thermal Stability and a New Crystallization Mechanism