Abstract:NbMoTaW refractory high entropy alloy (RHEA) possesses superior high temperature mechanical strength while the very low plastic strain at room temperature limits its practical applications. In present work, the method of adjusting composition was employed to improve the mechanical properties of (NbTaW)1-xMox (x=0, 0.05, 0.15, 0.25) alloys especially the plasticity at room temperature by the combination of experiments and first-principles calculations. Phase composition of the (NbTaW)1-xMox alloys identified using experiments and theoretical prediction were all single-phase solid solution. Microstructure and elements distribution of the alloys were characterized by SEM and EDS. All the as-casted alloys had dendrite structures and the grain size firstly increased (x<15) and then decreased (x>15) with the increase of Mo content. The compressive properties and the analysis of fracture surface demonstrated that strength and ductility of (NbTaW)1-xMox alloys were obviously enhanced with the decrease of Mo content. NbTaW MEA had the maximum mechanical strength (1460 MPa) and ductility (16.2%) in the designed alloys. Both the mechanical strength and plasticity at room temperature were greatly improved compared with that of NbMoTaW RHEA. The experimental results well agreed with that of first-principles calculations. The elastic anisotropy and microhardness of these alloys were also predicted. The orders of elastic anisotropy were (NbTaW)0.75Mo0.25 < (NbTaW)0.85Mo0.15 < (NbTaW)0.95Mo0.05 < NbTaW. The hardness of (NbTaW)1-xMox alloys were increased with increasing of Mo content. Optimizing composition was demonstrated to be an effective method to improve the mechanical properties of NbMoTaW refractory high entropy alloy.

The microstructure and properties of Mo0.5NbTiZrTax high entropy alloys enhanced by Ta addition

Microstructural Evolution and Mechanical Behavior of Novel TiZrTaxNbMo Refractory High-Entropy Alloys

Microstructure Modification and Ductility Improvement for TaMoNbZrTiAl Refractory High Entropy Alloys via Increasing Ti Content

Bio-Corrosion Behaviors and Bio-Compatibilities of Tinbzrta and Tinbzrtamo High Entropy Alloys

Tailoring the Microstructure and Mechanical Properties of Ta-Alloyed AlCoCrFeNi High-Entropy Alloys

Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

Mechanical, corrosion, and wear properties of biomedical Ti–Zr–Nb–Ta–Mo high entropy alloys

Microstructures and mechanical properties of Ta–Nb–Zr–Ti–Al refractory high entropy alloys with varying Ta/Ti ratios

Effects of Ta Content on Microstructure and Oxidation Behavior of AlCoCrFeNiYTax High Entropy Alloy

Effect of Ti Additions on Mechanical Properties of NbMoTaW and VNbMoTaW Refractory High Entropy Alloys

Effect of Ta Element on Microstructure Formation and Mechanical Properties of High-Nb TiAl Alloys

Effect of Ti on the Structure and Mechanical Properties of TixZr2.5-xTa Alloys.

Microstructure and properties of W0.5Ta0.3MoNbVAlTi1-xZrx high entropy alloy coatings by laser cladding on the surface of 45# steel

Changing the second phase distribution shape and improving the corrosion resistance of Mg-6.7Y-2.5Zn alloy by addition of trace Ta

Microstructure evolution and performance of TiMoCrW x Ta y refractory high-entropy alloy coatings prepared using laser cladding

First-principles study on the mechanical properties and thermodynamic properties of Mo-Ta alloys

Effects of Zr Content on the Microstructure and Performance of TiMoNbZrx High-Entropy Alloys

Microstructure of equiatomic and non-equiatomic Ti-Nb-Ta-Zr-Mo high-entropy alloys for metallic biomaterials

Study on the Microstructure and Mechanical Properties of Non-Equimolar NiCoFeAlTi High Entropy Alloy Doped with Trace Elements

Mechanical performance of (NbTaW)1−xMox (x = 0, 0.05, 0.15, 0.25) refractory high entropy alloys: Perspective from experiments and first principles calculations

Effects of Sn and Zr on the Microstructure and Mechanical Properties of Ti-Ta-Based Shape Memory Alloys