Abstract:The bio-corrosion behavior and bio-compatibility of TiNbZrTa and TiNbZrTaMo high entropy alloys (HEAs) are crucial for their efficient maintenance during biological implantation. In this work, TiNbZrTa and TiNbZrTaMo HEAs were successfully prepared via vacuum melting, with a beta-type titanium alloy Ti35Nb7Zr5Ta, exhibiting good biocompatibility used as a comparison. Due to the high entropy effect of equal atomic ratios, both TiNbZrTa and TiNbZrTaMo HEAs exhibit body-centered cubic (BCC) structure and lattice distortion compared to the beta titanium alloy Ti35Nb7Zr5Ta. Mo elements contribute to the formation of a new BCC phase, resulting in a white matrix rich in Ta and Mo, and a dark second phase rich in Ti, Zr, and Nb. Electrochemical test results at 37 degrees C shown that TiNbZrTa has a wider and more stable passivation area than TiNbZrTaMo. The XPS results shown that formation of the passive film is related to the main elements added. Ti, Nb, Ta and Mo formed oxides via the solid-liquid interface and migrate inward, while Zr is formed at the passivation film/metal substrate interface and migrates outward, finally forming the layered structure of the passivation film. Additionally, the cytotoxicity test of mouse fiber cells was carried out to evaluate the biocompatibility of the HEAs. The results shown that the cell proliferation rate of TiNbZrTa and TiNbZrTaMo HEAs reached 0 and 1, respectively, with TiNbZrTa exhibiting better biocompatibility, as adding Mo reduced the cell proliferation rate. These findings may provide a method for predicting the bio-corrosion behavior and bio-compatibility of HEAs used for biological implantation.

Microstructure of equiatomic and non-equiatomic Ti-Nb-Ta-Zr-Mo high-entropy alloys for metallic biomaterials

Solidification Microstructures of the Ingots Obtained by Arc Melting and Cold Crucible Levitation Melting in TiNbTaZr Medium-Entropy Alloy and TiNbTaZrX (X = V, Mo, W) High-Entropy Alloys

Development of non-equiatomic Bio-HEAs based on TiZrNbTa-(Mo and Mn)

Bio-Corrosion Behaviors and Bio-Compatibilities of Tinbzrta and Tinbzrtamo High Entropy Alloys

Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

Mechanical, corrosion, and wear properties of biomedical Ti–Zr–Nb–Ta–Mo high entropy alloys

Microstructure and Mechanical Properties of Biomedical Ti-Zr-Nb-Ta-Sn High-Entropy Alloys

Design and properties of novel Ti–Zr–Hf–Nb–Ta high-entropy alloys for biomedical applications

Microstructure Modification and Ductility Improvement for TaMoNbZrTiAl Refractory High Entropy Alloys via Increasing Ti Content

New TiTaNbZrMo high-entropy alloys for metallic biomaterials

As-cast microstructure and properties of non-equal atomic ratio TiZrTaNbSn high entropy alloys

Alloy Design and Properties Optimization of High-Entropy Alloys

The evolution of compositional and microstructural heterogeneities in a TaMo0.5ZrTi1.5Al0.1Si0.2 high entropy alloy

Microstructural, Mechanical, and Electrochemical Characterization of CrMoNbTiZr High-Entropy Alloy for Biomedical Application

Composition Design and Tensile Properties of Additive Manufactured Low Density Hf-Nb-Ta-Ti-Zr High Entropy Alloys Based on Atomic Simulations

The microstructure and properties of Mo0.5NbTiZrTax high entropy alloys enhanced by Ta addition

Effects of Mo, Nb, Ta, Ti, and Zr on Mechanical Properties of Equiatomic Hf-Mo-Nb-Ta-Ti-Zr Alloys

Investigations on microstructure and properties of Ti-Nb-Zr medium-entropy alloys for metallic biomaterials

Microstructure and Properties of Non-Equiatomic Ni10Cr6WFe9TiAlx High-Entropy Alloys Combined with High Strength and Toughness

Effect of Nb Content on Microstructure and Mechanical Properties of Mo0.25V0.25Ti1.5Zr0.5Nbx High-Entropy Alloys