Numerical study on the effects of wetting–drying cycles on the failure characteristics of tunnels excavated in gypsiferous strata based on discrete element method
Song Jiang,Ming Huang,Bingnan Wang,Kaishun Zhang,Yong Li,Zhiguo Liu
DOI: https://doi.org/10.1007/s10064-023-03393-z
IF: 4.2
2023-09-03
Bulletin of Engineering Geology and the Environment
Abstract:In many engineering applications, repeated wetting and drying is one of the most destructive processes which can lead to continuous damage to in situ rocks. Worse still, the situation is exacerbated if the action is coupled with flowing water conditions. In this work, the effects of wetting–drying (W-D) cycles on the failure characteristics of tunnels excavated in the gypsiferous strata were investigated by using the particle flow code. The meso-mechanical parameters of gypsiferous rock models under different W-D cycles at different flow rates (0, 10, and 20 l/h) were determined by the trial-and-error method. A two-dimensional 1/180 scale model of the tunnel was established based on the working principle of centrifuge. The evolution characteristics of force chains and fractures in the excavation disturbance zone (EDZ) under different conditions of W-D cycles and flow rates were analyzed. Furthermore, the formation mechanism of the problems in the South Lvliang Mountain Tunnel was discussed, and some prevention measures were suggested. The results showed that with increasing W-D cycles and flow rates, the fractures and disappearance zones of force chains in the EDZ gradually increase, while the influence of flow rates on their distribution becomes significant. With increasing W-D cycles and flow rates, under the unsupported condition, the development characteristics of growth curves of fractures will gradually transition from "rapid growth to stability" to "rapid growth to slow growth." Under the support condition, the development characteristics of growth curves of fractures will gradually transition from "rapid growth to stability" to "rapid growth to fluctuating growth, and then stability," and then to "rapid growth to slow growth, and then rapid fluctuating growth." The flow rates will greatly accelerate the deterioration of surrounding rocks caused by the action of W-D cycles, thus causing the lining damage in a shorter time.
engineering, environmental,geosciences, multidisciplinary, geological