Abstract:Laser sources are extensively used in surface engineering technology and in materials processing. Their high energy density, excellent directionality and monochromaticity makes them ideal for a wealth of potential uses that require the concentration of a significant amount of energy in a small area. From the electrochemical point of view, one of the most interesting applications for lasers is Laser Assisted Electrodeposition (LAE). Indeed, the high energy density transferred by a laser can locally change the electrochemical state of a surface by inducing photo-electrochemical or thermal-electrochemical effects, triggering thus metal reduction. In addition, it is also possible to pattern the deposited metal layer by scanning the surface of the substrate with the laser, usually with spatial resolution in the range of few micrometers. From the applicative point of view, LAE can be exploited for the selective deposition of metal layers for both decorative and functional uses. LAE can be intended in two ways: the laser can be used to enhance a standard electrolytic deposition process [1, 2], increasing deposition rates by focusing the radiation on the cathode, or it can be used to trigger electrodeposition on freestanding metal surfaces in total absence of any external polarization [1]. The latter approach is the most interesting due to the reduced complexity of the setup required and is made possible by the localized variation of the rest potential induced in the zone of the substrate hit by the light [1]. As a consequence of this variation, metallic ions can be reduced in correspondence of the illuminated zone. The occurrence of this phenomenon, which allows metal deposition without any external power source, has been demonstrated for Cu [1, 3], Ni [3] and Au [4]. Despite the work carried out by many research groups, still many aspects of LAE in absence of external polarization remain poorly understood. The aim of the present work is to investigate the possibility to perform LAE with some significant metal-substrate couples. The deposition mechanism is rationalized considering the specific electrochemical properties of the metals involved. In addition to this fundamental characterization, the work also aims at evaluating the industrial applicability of LAE. To this extent, patterned layers of precious metals are deposited on metallic substrates for decorative purposes. Finally, LAE is applied here for the first time to the deposition of alloys. [1] J. C. Puippe et al., J. Electrochem. Soc. 128(12), 2539-2545 (1981) [2] Z. Zhang et al., MDPI Materials 13, 3560 (2020) [3] R. J. von Gutfeid et al., IBM J. Res. Develop. 26(2), 136-144 (1982) [4] Khan et al., NASF Surface Technology White Papers 84(3), 6-13 (2019)

Laser activation of diamond surface for electroless metal plating

Laser activation of diamond films for electroless metal plating: Valence band modifications

Diamond coatings on copper surfaces through interface engineering

Formation of Pd Catalyst by Nd:Yag Laser Irradiation for Electroless Copper Deposition

Selective Metallization on Ordinary Polymer Substrates by Laser Direct Activation of Copper Phosphate or Nickel Phosphate

Selective‐area electroless copper plating on polyimide employing laser patterning of a catalytic film

Laser Assisted Electrodeposition of Metals and Alloys

Enhancement of the properties of pulsed laser-deposited carbon nitride by the synchronisation of laser and N2 gas jet pulses

Study on the preparation mechanism and property analysis of a localized Au coating by laser-induced cyanide-free electroplating

Precision sub-monolayer manipulation of diamond surface chemistry using laser direct write oxidation in air

Electroless Deposition of Copper and Fabrication of Copper Micropatterns on CVD Diamond Film Surfaces

Study of Electroless Ni Plating with Palladium-Free Activation on the Surface of SiCp/Al Composites

Facile electroless copper plating on diamond particles without conventional sensitization and activation

Nanometers-Thick Ferromagnetic Surface Produced by Laser Cutting of Diamond

Beneficial effects of laser irradiation on the deposition process of diamond/Ni60 composite coating with cold spray

Fabrication of metallic patterns on ordinary polymer substrates by laser direct activation and electroless plating

The Development of the Electrochemical Deposition Process of Nickel-Diamond Coating with Phosphorus Modified DND

Functional Surfaces via Laser Processing in Nickel Acetate Solution

Laser processing in 3D diamond detectors

Ultrafast photoionization and excitation of surface-plasmon-polaritons on diamond surfaces

Using a Laser Plasmatron to Synthesize Diamond Coatings on a Carbide Cutting Tool