Abstract:Epoxy (EP) composites with comprehensive good processability, low coefficient of thermal expansion (CTE), and high thermal conductivity, but electrical insulation properties are largely demanded in the higher power electric devices. However, micro-fillers have a positive effect on maintaining the good flowability of epoxy composites, while do not bring high thermal conductivity enhancement per unit mass. While nano-fillers with high specific surfaces offer very promising opportunities for heat-conducting network construction, but the nano-fillers dispersion is difficult to control and will cause increased viscosity and processing difficulties. Herein, we expect that the addition of small amounts of silver nanowires (AgNWs) at 0.5 vol.% into the EP/S-Al2O3 composites could largely enhance the thermal conductivity but not sacrifice their processability. Owing to the bridging effects of rigid nanowires between the main spherical particles, the thermal conductivity of the micro-nano EP/AgNWs/S-Al2O3 composites with 40 vol.% S-Al2O3 and 0.5 vol.% AgNWs exhibits a 106.5% increment comparing to that without AgNWs. The limitation of both single micro or nano-sized thermal conductive fillers can be offset by the micro-nano filler network structure. The best combination properties of the EP/AgNWs/S-Al2O3 composites can reach the high thermal conductivity (1.602 W/m·K), low viscosity (55.6 Pa.s), low CTE (37.1 ppm/°C), and high glass transition temperature (Tg, 152.1°C). These results demonstrate that adding multiscale fillers into epoxy composites may solve the tradeoff between thermal conductivity and processability performances and fit the applications in high-power density electronic devices.

Construction of conductive three-dimensional structure by low content of silver nanowires and its application in epoxy resin

Low Electrical Percolation Threshold of Silver and Copper Nanowires in Polystyrene Composites

Ice-templated assembly strategy to construct three-dimensional thermally conductive networks of BN nanosheets and silver nanowires in polymer composites

High-Performance Epoxy/Silica Coated Silver Nanowire Composites As Underfill Material for Electronic Packaging

Single droplet 3D printing of electrically conductive resin using high aspect ratio silver nanowires

Highly Thermal Conductive and Electrical Insulating Epoxy Composites with a Three-Dimensional Filler Network by Sintering Silver Nanowires on Aluminum Nitride Surface

Nanoarchitectonics of BN/AgNWs/Epoxy Composites with High Thermal Conductivity and Electrical Insulation

Achieving highly thermal conductivity of polymer composites by adding hybrid silver–carbon fiber fillers

Hybrid of Silver Nanowire and Pristine-Graphene by Liquid-Phase Exfoliation for Synergetic Effects on Electrical Conductive Composites

Scalable synthesis of the mono-dispersed silver micro-dendrites and their applications in the ultralow cost printed electrically conductive adhesives

Synergetic Effects of Silver Nanowires and Graphene Oxide on Thermal Conductivity of Epoxy Composites

Hybrids of Silver Nanowires and Silica Nanoparticles As Morphology Controlled Conductive Filler Applied in Flexible Conductive Nanocomposites

Construction of 3D boron nitride nanosheets/silver networks in epoxy-based composites with high thermal conductivity via in-situ sintering of silver nanoparticles

Silver Nanosheet-Coated Copper Nanowire/epoxy Resin Nanocomposites with Enhanced Electrical Conductivity and Wear Resistance

Structure, Rheological, Thermal Conductive and Electrical Insulating Properties of High-Performance Hybrid Epoxy/nanosilica/agnws Nanocomposites

Highly Thermal Conductive and Electrically Insulating Epoxy Composites Based on Zinc-Oxide-Coated Silver Nanowires

Novel micro-nano epoxy composites for electronic packaging application: Balance of thermal conductivity and processability

A high-performance thermally conductive and electrically insulating silver@siloxane/graphene/epoxy composites at low filler content: Fabrication, mechanism study of insulation and thermal conductivity enhancement

Construction of three-dimensional interconnected boron nitride/sliver networks within epoxy composites for enhanced thermal conductivity

Direct 3D Printing of Hybrid Nanofibers-based Nanocomposites for Highly Conductive and Shape Memory Applications.

Precise Assembly and Joining of Silver Nanowires in Three Dimensions for Highly Conductive Composite Structures