Abstract:Modeling and evaluating critical puncture-cutting force and total applied energy are among the most important steps in characterizing the resistance of protective materials to sharp-tipped object insertion. This paper explores the relationship between these two mechanical properties, force and energy, corresponding to the insertion of a pointed blade into soft membranes. The paper’s main contribution includes the addition of friction energy to the existing analytical cutting model in order to develop a more comprehensive model. This energy is provided by the normal stress (contact pressure) caused by the created fracture surface. The contact pressure is applied on both lateral sides of the pointed blade. In this work, a model describing the combined puncture and cutting of protective materials is developed using force distribution analysis and basic concepts of fracture mechanics. Results show that the critical puncture-cutting force (FP/C) required for complete insertion of a pointed blade decreases with the increase of the puncture-cut ratio, ζ, given by the shape of the pointed blade. In other words, the puncture cutting of soft membranes is easier when the pointed blade has a high cutting edge angle than when it has a small cutting edge angle. Fracture mechanics theory is then used to determine the relationship between FP/C and the total puncture-cutting energy, GTotal, that includes fracture toughness of material and friction energy. The presented model is verified by comparing the predicted values of FP/C with experimental data obtained from puncture-cutting tests of soft elastomeric materials and soft-coated fabrics by three pointed blades. According to the proposed model, the methods corresponding to force measurement (FP/C) or energy calculation (GTotal) are both able to evaluate accurately the puncture-cut resistance of protective materials by any sharp-tipped objects.

Finite element modeling of the puncture-cutting response of soft material by a pointed blade

Finite Element Study of Mixed Fracture: Velocity-Dependent Insertion Of Pointed Blades Into Soft Material

A Finite-Volume Implementation of the Phase-Field Model for Brittle Fracture with Adaptive Mesh Refinement

Stress state analysis and tensile-shear fracture criterion in combined puncture and cutting of soft materials

Analytical and experimental investigation of puncture-cut resistance of soft membranes

Finite Element Simulation of High-Speed Cutting

Combined Puncture and Cutting of Soft-Coated Fabrics by a Pointed Blade: Energy, Force and Stress Failure Criteria

Finite Element Modelling of Complex 3D Static and Dynamic Crack Propagation by Embedding Cohesive Elements in Abaqus

Puncturing of soft tissues: experimental and fracture mechanics-based study

Cutting Force Of Hollow Needle Insertion In Soft Tissue

A particle finite element method approach to model shear cutting of high-strength steel sheets

3D Finite Element Simulation of Complex Static and Dynamic Fracture in Quasi-Brittle Materials

Finite element simulation of cutting process under the worn tool edge geometries

Theoretical Puncture Mechanics of Soft Compressible Solids

Tool-edge geometry effects in semi-to-finish cut machining operations on subsurface integrity and tool thermo-mechanical loadings: A coupled damage-fracture energy based finite element approach

Comparison of the phase-field approach and cohesive element modeling to analyze the double cleavage drilled compression fracture test of an elastoplastic material

Cutting soft matter: scaling relations controlled by toughness, friction, and wear

On modeling fracture of soft polymers

Numerical prediction of the chip formation and damage response in CFRP cutting with a novel strain rate based material model