Abstract:The effect of different constitutive modelling choices is crucial under a high strain rate as encountered in ballistic applications. Natural fragmentation of explosively driven cylinder rings is chosen as a simplified example to describe the ability of numerical simulations to describe fractures. The main research interests are the importance of (i) material imperfections, (ii) the accuracy of fracture models vs. damage models, (iii) the plasticity algorithm (stress update), (iv) the introduction of a triaxiality cutoff criterion to the damage models, and (v) different constitutive models (plasticity and damage). Due to the complexity of the propagation and coalescense of multiple cracks in classical methods, smoothed-particle hydrodynamics (SPH) is used as a tailor-made method to discretise the model. An elasto-plasticity model, a damage model and an equation of state describe the material behaviour. The required material parameters are determined based on stress-strain curves from quasi-static and dynamic tests. The Johnson-Cook model, with and without a modification of the strain rate term, and the Rusinek-Klepaczko model are used to describe plasticity. These plasticity models are combined either with the Johnson-Cook, the Lemaitre, or the Dolinski-Rittel damage model and the Mie-Grüneisen equation of state. The numerical results show that (i) a random distribution of initial damage increases irregularity of cracks, and gives more realistic fragment shapes, (ii) a coupling of plasticity model and fracture criterion has only a small effect on the fracture behaviour, (iii) using an iterative plasticity solver has a positive effect on the fracture behaviour, although this effect is marginal, (iv) adding a triaxiality cutoff criterion to the damage models improves the predicted fragment masses in the numerical simulations significantly, and (v) good accordance between experiments and numerical simulations are found for the Dolinski-Rittel and Lemaitre damage model with both plasticity models.

Comparison of the phase-field approach and cohesive element modeling to analyze the double cleavage drilled compression fracture test of an elastoplastic material

An open-source Abaqus implementation of the phase-field method to study the effect of plasticity on the instantaneous fracture toughness in dynamic crack propagation

Comparative analysis of phase-field and intrinsic cohesive zone models for fracture simulations in multiphase materials with interfaces: Investigation of the influence of the microstructure on the fracture properties

An assessment of phase field fracture: crack initiation and growth

Numerical Study on Crack Propagation in Linear Elastic Multiphase Composite Materials Using Phase Field Method

A Study on Phase-Field Models for Brittle Fracture

Comparative Study on High Strain Rate Fracture Modelling Using the Application of Explosively Driven Cylinder Rings

A Comparative Review of XFEM, Mixed FEM and Phase-Field Models for Quasi-brittle Cracking

Phase field modeling of crack propagation in structures under tensile stress

A general framework for decomposing the phase field fracture driving force, particularised to a Drucker-Prager failure surface

The revisited phase-field approach to brittle fracture: Application to indentation and notch problems

Evaluating fracture energy predictions using phase-field and gradient-enhanced damage models for elastomers

Modeling Brittle Fractures in Epoxy Nanocomposites Using Extended Finite Element and Cohesive Zone Surface Methods

Crack phase-field model equipped with plastic driving force and degrading fracture toughness for ductile fracture simulation

Three-dimensional modeling of fracture in quasi-brittle materials using plasticity and cohesive finite elements

A comparative study between phase‐field and micromorphic gradient‐extended damage models for brittle fracture

Phase-Field Modeling of Coupled Brittle-Ductile Fracture in Aluminum Alloys

A phase field model for cohesive fracture in micropolar continua

Viscoelastic phase-field fracture using the framework of representative crack elements

Phase field modeling of brittle compressive-shear fractures in rock-like materials: A new driving force and a hybrid formulation

A phase-field formulation incorporating mode-dependent fracture toughness for fracture modeling in rock-like materials