Abstract:Fracture growth in a material is strongly influenced by the presence of inhomogeneities, which deviate crack trajectories from rectilinearity and deeply affect failure. Increasing crack tortuosity is connected to enhancement of fracture toughness, while often a crack may even be stopped when it impinges a void, which releases the stress concentration. Therefore, the determination of crack trajectories is important in the design against failure of materials and mechanical pieces. The recently developed phase-field approach (AT1 and AT2 models), based on a variational approach to damage localization, is believed to be particularly suited to describe complex crack trajectories. This belief is examined through a comparison between simulations and photoelastic experiments on PMMA plates, which have been designed in a new way, to highlight the effects of notches and circular holes on fracture propagation. The latter is shown to initiate from a notch and to be strongly attracted by voids. When a void is hit, fracture is arrested, unless the void contains a notch on its internal surface, from which a new crack nucleates and propagates. Different mechanical models are tested where fracture initiates and grows (i.) under Mode I compact tension, (ii.) four-point bending and (iii.) a tensile stress indirectly generated during compression of samples containing a circular hole. The experiments show that the fracture propagation may be 'designed' to develop in different tortuous paths, involving multiple arrests and secondary nucleation. Simulations performed with an ad hoc implemented version of the AT1 and AT2 phase-field methods (equipped with spectral decomposition, in which a crack is simulated as a highly localized zone of damage accumulation) are shown to be in close agreement with experiments and therefore confirm the validity of the approach and its potentialities for mechanical design.

Phase field modeling of crack propagation in structures under tensile stress

A Finite-Volume Implementation of the Phase-Field Model for Brittle Fracture with Adaptive Mesh Refinement

Phase field modeling of quasi-static and dynamic crack propagation: COMSOL implementation and case studies

Phase field simulation of fatigue crack propagation under complex load situations

A phase field modeling approach of cyclic fatigue crack growth

A Phase-Field Framework for Modeling Multiple Cohesive Fracture Behaviors in Laminated Composite Materials

Phase field modeling of crack propagation under combined shear and tensile loading with hybrid formulation

A phase-field model for fracture in biological tissues

A Study on Phase-Field Models for Brittle Fracture

An adaptive phase-field model based on bilinear elements for tensile-compressive-shear fracture

A phase field method for plane-stress fracture problems with tension-compression asymmetry

An assessment of phase field fracture: crack initiation and growth

Failure through crack propagation in components with holes and notches: An experimental assessment of the phase field model

Phase Field Modeling of Fast Crack Propagation

Numerical Study on Crack Propagation in Linear Elastic Multiphase Composite Materials Using Phase Field Method

Modeling the dynamic and quasi-static compression-shear failure of brittle materials by explicit phase field method

A phase‐field method for modeling cracks with frictional contact

Phase-field simulation of crack propagation in quasi-brittle materials: COMSOL implementation and parameter sensitivity analysis

Phase field cohesive zone modeling for fatigue crack propagation in quasi-brittle materials

A thermodynamically consistent phase-field regularized cohesive fracture model with strain gradient elasticity and surface stresses

Crack nucleation and propagation simulation in brittle two-phase perforated/particulate composites by a phase field model