Abstract:Abstract Current experimental methods of assessing rock fracture toughness require a large sample size (i.e., Brazillian test, semi-circular bending, three-point bending), which cannot be extracted at greater depths and along horizontal well. Alternatively, fracture toughness can be evaluated at a finer scale using scratch testing. This study investigates the rock failure mechanism using micro-scratch testing and phase field modeling on rock fragments. The phase field approach models the crack growth and initiation based on energy minimization principles and by portraying the crack surface as a diffused entity. The method has been known for its robustness in preventing numerical singularities due to sharp crack discontinuities in complex crack topologies. In the phase-field scheme, a regularization scalar order parameter is used to indicate the material’s state (from undamaged to damage) during fracture formation. The associated loss of stiffness in rock during fracture formations is captured by the coupling of selected energy degradation function with embedded scalar order parameter and partial differential equations defining the deformation, history, and phase-field evolutions. In doing so, information on stress strain development is needed to evaluate the change in free energy during cracks formation. In this study, scratch testing is used to obtain load-displacement data related to stress strain history. During the test, an indenter scratches the surface of the rock under increasing load. The critical loads where the crack initiates and the chipping spallation occurs are identified based on the microscopic observations, acoustic emission signals, recorded tangential force and recorded depth. The critical loads are used to determine the crack length associated with chipping formation, while the recorded force displacement data are used to obtain the dimensionless stress-strain curve. Both the crack lengths and the dimensionless stress strain curve are then used as the input to the phase field model developed to approximate the fracture toughness of the rock tested. Scratch tests are performed on samples obtained from Eagle Ford formation. The experiments are conducted in short transverse and divider orientations. The crack formations are studied under the progressive load application. The critical loads where crack initiates and chips form are identified mainly based on the panoramic picture obtained after the test and the spikes seen on the Acoustic Emission signals. Preliminary results show that the fracture toughness is lower for samples tested in parallel to the bedding orientation (i.e., divider). Fracture toughness of rocks has attracted wide attention in the last few years in the design and analysis of hydraulic fracturing for hydrocarbon and geothermal recovery. The currently proposed methodology allows for a quicker and more reliable way of approximating rock fracture toughness from small rock samples. The incorporation of the phase field model allows better prediction of rock fracture toughness as the method is capable of overcoming classical model limitations of quantifying crack initiation and crack propagation in the complex fracture networks.

Approximation of Rock Fracture Toughness using Scratch Test and Phase-Field Modeling Approach

A Finite-Volume Implementation of the Phase-Field Model for Brittle Fracture with Adaptive Mesh Refinement

An improved technique for characterizing the fracture toughness via scratch test experiments

A Phase Field Model with Modified Volumetric-Deviatoric Decomposition for the Mixed-Mode Fracture of Rock

Phase field modeling of brittle compressive-shear fractures in rock-like materials: A new driving force and a hybrid formulation

A phase-field formulation incorporating mode-dependent fracture toughness for fracture modeling in rock-like materials

An experimental investigation of brittle failure mechanisms in scratch tests of rock

Simulation of Shear and Tensile Fractures Using Ductile Phase Field Modelling with the Calibration of P Wave Velocity Measurement and Moment Tensor Inversion

Adaptive Phase Field Simulation of Quasi-Static Crack Propagation in Rocks

Phase Field Modelling of Crack Propagation, Branching and Coalescence in Rocks

Damage Mechanics Challenge: Predictions based on the phase field fracture model

Scratch test model for the determination of fracture toughness

Phase Field Characterization of Rock Fractures in Brazilian Splitting Test Specimens Containing Voids and Inclusions

Fracture Toughness Determination of Cracked Chevron Notched Brazilian Disc Rock Specimen Via Griffith Energy Criterion Incorporating Realistic Fracture Profiles

A New Phase Field Model for Mixed-Mode Brittle Fractures in Rocks Modified from Triple Shear Energy Criterion

A three-field phase-field model for mixed-mode fracture in rock based on experimental determination of the mode II fracture toughness

Quantifying Post-peak Behavior of Rocks with Type-I, Type-II, and Mixed Fractures by Developing a Quasi-State-Based Peridynamics

A hybrid phase-field method for modeling mixed-mode fractures in elastoplastic rock-like materials

Experimental Study on Evaluating Fracture Processes of Different Rocks Using Multiple Physical Parameters

A PHASE FIELD METHOD TO SIMULATE CRACK NUCLEATION AND CRACK PROPAGATION IN ROCK-LIKE MATERIALS