Abstract:Textile Research Journal, Ahead of Print. A fabric touch tester is a novel instrument with fabric handling properties. Its principal advantage is that the device has integrated modules for compression, surface friction, and thermal and bending properties. This module integration simplifies the testing process, and provides an efficient measurement method, and a comprehensive physical index. This study focused on woven fabrics for dress shirts. The fabric samples comprised three groups with various yarn compositions – that is, cotton, polyester, and wool. Sample group 1 was composed of cotton, polyester, and blended yarns; sample group 2 mainly compared the effect of twist yarns on the fabric touch; and sample group 3 was composed of wool and blended yarns with polyester. The handling properties were assessed by compression work and the compression recovery rate for the compression attributes. The results revealed that fabric (T100p1) with high twist-level yarns had a higher value of compression work (242.56 gf*mm2), and the texture type may affect the compression characteristics more significantly than the blending ratio. The fabric touch tester can also distinguish small changes in the compression properties of samples (0.43–0.71), the maximum heat flux and surface roughness amplitude for the thermal and surface roughness properties. The results revealed that the maximum heat flux value of all the samples in this study was 1109 Wm−2, the sample C100 using pure cotton yarn had the highest maximum heat flux value (1270 Wm−2). Moreover, the sample W100 with 100% wool fiber yarn had the highest surface roughness amplitude in the warp direction (81 μm) and surface roughness amplitude in the weft direction (67 μm). Finally, the bending average rigidity was used to assess the bending performance of the fabric samples. These fabric touch tester indicators were applied to analyze the fabric handling characteristics of woven shirting fabrics, and perform cross-analysis among samples.

Investigation of worsted woven fabric’s static friction coefficient considering fabric direction

Investigation the yarn to yarn static and kinetic friction based on the response surface method

Effect of abrasion level on surface handling and thermal conductivity of blended suit fabrics

Fiber-on-fiber friction measurement using hanging fiber method

Experimental study on the maximum static friction coefficient of fiber winding based on semi‐geodesic method

Investigation of the Tensile Stress Relaxation Phenomenon in Seamed Worsted Fabrics

Modeling the shear behavior of spunbond nonwoven fabrics using the finite element method

The effect of fabric structure on the pilling and abrasion resistance of interlock weft-knitted fabrics

Bending and Shear Property of Fabrics Produced from Trevira CS and Its Blends

Statistical approach on the inter-yarn friction behavior of the dual-phase STF/ρ-Aramid impregnated fabrics via factorial design and 3D-RSM

Effect of Weft Yarn Type and Weaving Parameters on Surface Roughness and Drapeability of Woven Fabric

Influence of fabric geometry on yarn pull‐out property and wear performance of hybrid S‐glass/ PTFE fabric‐reinforced composites

Study of friction in the "textile-human" system for the ergonomic design of sustainable functional clothing

Yarn/Yarn Friction Analysis Considering the Weaving Process of Textile Fabrics: Analytical Model and Experimental Validation

Experimental Study on Yarn Pullout Test of STF Modified Fabric

Fabric handling evaluation of woven shirting fabrics by the fabric touch tester

Modeling the flexural rigidity of spunlace nonwoven fabrics

Discussion of Warp and Weft Twist Direction Matching Effect on Cotton Fabric Texture Property

Numerical study of the Impact of shear angle, yarn spacing and yarn fiber volume fraction on effective elastic properties of plan-woven composite

Assessing Inter-yarn Frictional Behavior of Jute Fabrics Impregnated with Corn Flour Particles-Based Shear Thickening Fluids

Influence of fabric structure and finishing pattern on the thermal and moisture management properties of unidirectional water transport knitted polyester fabrics