Abstract:Sodium-sulfur (Na-S) batteries have been commercialized for stationary energy storage systems because of their low-cost fabrication and long-cycling stability. However, the Na-S batteries need to operate at high temperatures (> 300 o C) to maintain the molten state of sodium anode and sulfur cathode, which requires extra energy and raises safety issues when the solid electrolyte membrane fails. Therefore, low-temperature all-solid-state Na-S batteries (such as 60 o C) are highly desirable because of the improved safety and a lower operating temperature. To achieve high sulfur-specific capacity and long-cycling stability, the stable interfaces between electrodes and solid-state electrolyte are important for all-solid-state Na-S batteries. Herein, we demonstrate a strategy using Na alloy anodes to replace Na metal anode to solve the issues of unstable interface between Na metal and solid-state electrolytes. Na-Sn and Na-Sb alloys are first compared in terms of their alloying/dealloying process to identify the advantage of Na-Sb alloy as the anode. The Na-Sb alloy anode shows its superior stability against the solid electrolyte and undergoes a stable Na alloying/dealloying process at 0.04 mA cm -2 for over 500 hours. Sulfur-carbon composites with confined sulfur nanostructure were synthesized via the sulfur vapor deposition method and further utilized in full cells. Combining the optimized Na-Sb alloy anode and sulfur composite cathodes, the all-solid-state Na alloy-S battery shows improved rate performance and a high sulfur-specific capacity of 1377 mAh g -1 with good capacity retention of 70 % after 180 cycles at 60 o C (Figure 1a and b). Postmortem analysis of both the anode and cathode shows a reversible discharge/charge process after the first cycle and undergoes significantly rearranged distributions of carbon and solid electrolytes after 180 cycles due to severe volume change induced by repeated sodiation/desodiation process. These research results show a high sulfur specific capacity with long-cycling stability and shed light on further improving next-generation Na-S energy storage systems. Figure 1

An All-Solid-State Sodium–Sulfur Battery Using a Sulfur/Carbonized Polyacrylonitrile Composite Cathode

A Stable Quasi‐Solid‐State Sodium–Sulfur Battery

Solid‐State Lithium–Sulfur Battery Enabled by Thio‐LiSICON/Polymer Composite Electrolyte and Sulfurized Polyacrylonitrile Cathode

S0.87Se0.13/CPAN Composites As High Capacity and Stable Cycling Performance Cathode for Lithium Sulfur Battery

Nanostructured Β-Li3ps4 for All-Solid Lithium-Sulfur Batteries

Se As Eutectic Accelerator in Sulfurized Polyacrylonitrile for High Performance All-Solid-state Lithium-Sulfur Battery

Self‐Formed Electronic/Ionic Conductive Fe 3 S 4 @ S @ 0.9Na 3 SbS 4 ⋅0.1NaI Composite for High‐Performance Room‐Temperature All‐Solid‐State Sodium–Sulfur Battery

Development of Stable All-Solid-State Sodium-Sulfur Batteries

Quasi-Solid-State Lithium-Sulfur Batteries Assembled by Composite Polymer Electrolyte and Nitrogen Doped Porous Carbon Fiber Composite Cathode

Quasi‐Solid Sulfur Conversion for Energetic All‐Solid‐State Na‐S Battery

High-Performance All-Inorganic Solid-State Sodium-Sulfur Battery.

Porous Spherical Polyacrylonitrile-Carbon Nanocomposite with High Loading of Sulfur for Lithium–sulfur Batteries

Porous sulfurized poly(acrylonitrile) nanofiber as a long-life and high-capacity cathode for lithium–sulfur batteries

Self‐Formed Electronic/Ionic Conductive Fe3S4 @ S @ 0.9na3sbs4⋅0.1nai Composite for High‐Performance Room‐Temperature All‐Solid‐State Sodium–Sulfur Battery

Confined tandem catalytic quasi-solid sulfur reversible conversion for all-solid-state Na–S batteries

Selenium-Doped Sulfurized Polyacrylonitrile Hybrid Cathodes with Ultrahigh Sulfur Content for High-Performance Solid-State Lithium Sulfur Batteries

CNTs@S Composite As Cathode for All-Solid-state Lithium-Sulfur Batteries with Ultralong Cycle Life

High-Performance All-Solid-State Lithium-Sulfur Battery Enabled by A Mixed-Conductive Li2s Nanocomposite

A High Capacity All Solid‐State Li‐Sulfur Battery Enabled by Conversion‐Intercalation Hybrid Cathode Architecture

Ternary Sulfur/polyacrylonitrile/mg₀.₆ni₀.₄o Composite Cathodes for High Performance Lithium/sulfur Batteries

Electrochemical Polymerization of Nonflammable Electrolyte Enabling Fast-Charging Lithium-Sulfur Battery