Abstract:With great power comes great challenges. For nuclear fusion, the holy grail of energy, taming the flame of a miniature star in a solid container remains one of the most fundamental challenges. A tungsten armour for the solid container marks a temporary triumph—a solution adopted by the world's largest fusion experiment, ITER—but may be insufficient for future challenges. High-entropy alloys (HEAs), which are characteristic of a massive compositional space, may bring new solutions. Here, we explore their potential as plasma-facing materials (PFMs) with a prototype W57Ta21V11Ti8Cr3 HEA that was designed by exploiting the natural-mixing tendency among low-activation refractory elements. Revealed by X-ray diffraction analysis and energy-dispersive X-ray spectroscopy, it predominantly consists of a single bcc-phase but with V, Ti, and Cr segregation to grain boundaries and at precipitates. Its yield strength improves ~60% at room temperature and oxidation rate reduces ~6 times at 1273 K, compared with conventionally used W. The Ti-V-Cr rich segregations and the formed CrTaO4 compound contribute to the improved oxidation resistance. However, the Ti-V-Cr rich segregations, along with the decreasing valence-electron concentration of the matrix by the addition of Ta, V and Ti elements, considerably increase the deuterium retention of the W57Ta21V11Ti8Cr3 HEA to ~675 multiples of recrystallized W. Moreover, its thermal conductivity decreases, being ~40% of W at 973 K. However, the maximum tolerable steady-state heat load is still ~84% of W because of its exceedingly high yield strength at elevated temperatures. Overall, despite being preliminary, we expect HEAs to play an important role in the development of advanced PFMs, for their disadvantages are likely to be compensated by their advantages or be overcome by composition optimization.

Stability of Tungsten Crucible against Uranium, Rare Earth, Cadmium, and Chlorides for Cathode Process in Pyroprocessing

Tungsten Joining with Copper Alloy and Its High Heat Load Performance

Effect of High Temperature Annealing on the Microstructure and Thermal Shock Resistance of Tungsten Coatings Grown by Chemical Vapor Deposition

Vacuum Hot-Pressed Beryllium and Tic Dispersion Strengthened Tungsten Alloy Developments for Iter and Future Fusion Reactors

Mechanical Properties and Thermal Shock Performance of W-Y2O3composite Prepared by High-Energy-rate Forging

Progress of High Heat Flux Component Manufacture and Heat Load Experiments in China

Atomic Scale Stability of Tungsten-Cobalt Intermetallic Nanocrystals in Reactive Environment at High Temperature.

Effects of minor rhenium additions on the thermal properties and recrystallization temperature of tungsten alloy

Direct Tungsten Extraction from Scheelite in a Molten Salt Media

Blistering Behavior and Deuterium Retention in Tungsten Vanadium Alloys Exposed to Deuterium Plasma in the Linear Plasma Device STEP

Thermal Shock Performance of CVD Tungsten Coating at Elevated Temperatures

Development of irradiation tolerant tungsten alloys for high temperature nuclear applications

Preparation and Properties of Tungsten-Rhenium Alloys Resistant to Ultra-High Temperatures

Surface Blistering and Deuterium Retention in Chemical Vapor Deposition Tungsten Exposed to Deuterium Plasma

Recent progress on preparation routes and performance evaluation of ODS/CDS-W alloys for plasma facing materials in fusion devices

Recent progress of thick tungsten coating prepared by chemical vapor deposition as the plasma-facing material

Recrystallization Kinetics of 50% Hot-Rolled 2% Y2O3 Dispersed Tungsten

High-temperature tensile and thermal shock characterization of low-temperature rolled tungsten

Microstructural Effects of Y2O3 and TiC Additions in Tungsten

Influence of Surface Melting on the Deuterium Retention in Pure and Lanthanum Oxide Doped Tungsten

Preliminary exploration of a WTaVTiCr high-entropy alloy as a plasma-facing material