Abstract:Electrically conductive adhesives were made using silver-coated copper powders (filler) and epoxy. Resistivity, microstructure and shear strength of prepared adhesives were studied using two-point resistance measurements, Scanning Electron Microscope (SEM) and universal tensile tests, respectively. Effect of filler concentration (70–85 wt%), silver concentration (10–50 wt%), particles morphology (flake or spherical) and addition of graphite (2–15 wt%) were investigated on prepared adhesives properties. Results showed that by increasing the filler percentage from 70 to 85 wt%, the electrical resistivity decreases from 6.2 × 10−3 to 3 × 10−3 Ω·cm. Furthermore, the electrical resistivity of adhesives is proportional to the silver content of the filler particles. Regarding the morphological effect of filler particles, it was found that by replacing 40 wt% of the flake with spherical particles in the adhesive with a filler content of 75 wt%, the electrical resistivity of the adhesive reduces from 5.6 × 10−3 to 4.5 × 10−3 Ω·cm, while the electrical resistivity of the adhesive containing 50 wt% of the spherical particles reached to 1.1 × 10−2 Ω·cm. Graphite addition to adhesive formula in concentrations less than 6 wt%, slightly lowered the resistivity of the adhesives. Increasing the graphite addition from 6 to 15 wt% enhanced the electrical resistivity from 2.8 × 10−3 to 1.7 × 10−2 Ω·cm. The shear strength of the adhesives is inversely proportional to the filler percentage in the adhesives.

Electrical Property Improvement of Copper Filler Conductive Adhesive with Low-Melting Point Metal Bridge

Effect of Thermal Annealing on the Electrical Conductivity of Copper-Tin Polymer Composites.

Improving Adhesion Strength and Thermal Conductivity of Nanowire Surface Fastener

Effects of low melting point SnBi58 alloy on the properties of isotropic conductive adhesives

Improved metal-adhesive polymers from copper(I)-catalyzed azide-alkyne cycloaddition

Binder Chemistry for Ultra-Highly Conductive Pastes by Low Temperature Sintering of Silver Micro-Fillers

Synthesis and Properties of Copper Conductive Adhesives Modified by SiO2 Nanoparticles

Copper Particles/epoxy Resin Thermosetting Conductive Adhesive Using Polyamide Resin As Curing Agent

Effect of Flake Silver-Plated Copper Particles on the Property Enhancement of Electrically Conductive Adhesives.

The Mixture of Silver Nanowires and Nanosilver-Coated Copper Micronflakes for Electrically Conductive Adhesives to Achieve High Electrical Conductivity with Low Percolation Threshold

Microstructure, resistivity, and shear strength of electrically conductive adhesives made of silver-coated copper powder

The Sintering Behavior of Electrically Conductive Adhesives Filled with Surface Modified Silver Nanowires

Effect of liquid metal enhanced Cu Nano/Micro particle paste on performance of Cu-Cu joints

A Study on the Preparation and Properties of Conductive Adhesive Filled with Multi-component Fillers for Green Packaging

A study on the resistivity and mechanical properties of modified nano-Ag coated Cu particles in electrically conductive adhesives

Effect of MXene fillers on the electrical conductivity of Ag-coated Cu conductive adhesives

Enhancement of electrical properties of anisotropically conductive adhesive joints via low temperature sintering

Mechanism of Solder Joint Cracks in Anisotropic Conductive Films Bonding and Solutions: Delaying Hot-Bar Lift-Up Time and Adding Silica Fillers

Silver coated copper powder conductive adhesive and preparation method thereof

Influence of Sn on M Icrostructure and Performance of Electric Vacuum Ag-Cu Filler M Etal

Electrically conductive adhesives with sintered silver nanowires