Abstract:Gel polymer electrolyte films (GPEs) based on polyacrylonitrile (PAN) complexed with NaF salt and an Al2O3 nanofiller were prepared via solution cast method. Structural studies were performed to investigate the order of conductivity under the influence of salt and nanofillers. The prepared films were characterized using energy dispersive x-ray spectrometry (EDS) to determine the chemical composition in wt%. EDS studies reveal that PAN–NaF with Al2O3 ceramic filler decreases the degree of crystallinity with increasing concentration of the nanofiller. The UV–Vis spectrum was recorded by a Hewlett-Packard HP8452A diode array spectrometer. The structural effect of salt and nanoparticles on the conductivity was also confirmed by UV–Vis spectroscopy. The mechanical properties of the prepared polymer electrolytes were determined using a Universal Tensile Machine (Instron Model 5565, Canada) with a constant crosshead speed of 10 mm/min. The addition of nanoparticles increased both the modulus and the strength of the polymer nanocomposites. Both the tensile strength and Young’s modulus increased with increasing functionalized nanoparticle loading. The change in transition temperature caused by the incorporation of the Al2O3 nanofiller and plasticizer into the PAN+NaF complex was studied by differential scanning calorimetry (DSC) analysis. Additionally, DSC thermograms were recorded to measure the glass transition temperature and melting temperature of PAN-based electrolytes using a Mettler instrument. Conductivity studies were carried out for all the prepared polymer electrolytes to understand the conduction mechanism. The role of the ceramic phase is to reduce the melting temperature, which is ascertained from DSC. The sample containing PAN:NaF (70:30) exhibits the highest conductivity of 1.82 x 10−4 S cm−1 at room temperature (303 K) and 2.96 x 10−3 S cm−1 at 378 K. The polymer electrolytes considered in the present study exhibited an Arrhenius type of conduction. The polymer electrolyte containing 3 wt% Al2O3 nanofiller showed an ionic conductivity of 5.96 × 10−3 S cm−1. To determine transfer numbers, Wagner’s polarization method can be used. From these studies, it is observed that the conduction mechanism is predominantly due to ions. Using this (PAN–NaF– Al2O3) (70:30:3) electrolyte, a solid-state electrochemical cell was fabricated, and its discharge profiles were studied under a constant load of 100 kΩ. Finally, several cell profiles associated with this cell were evaluated and reported.

Effect of Al2O3 nanoparticles on ionic conductivity of PVdF-HFP/PMMA blend-based Na+-ion conducting nanocomposite gel polymer electrolyte

Preparation and characterization of PEO-PMMA polymer composite electrolytes doped with nano-Al 2 O 3

Effects of PDMS with Polyether Side Chains on the Fluoropolymer Based Gel Lithium Electrolytes

Electrical and Structural Characterization of PVA/PEG Polymer Blend Electrolyte Films Doped with NaClO 4

Effect of Al2O3 Nanoparticle on the characteristic Parameters of PVDF-co-HFP Based Mg2+ Conducting Polymer Electrolyte Membranes

Nano-size LiAlO2 ceramic filler incorporated porous PVDF-co-HFP electrolyte for lithium-ion battery applications

Preparation of PVA-based composite alkaline solid polymer electrolyte with La2O3 nanoparticle filler

Gel Polymer Electrolyte Membranes Boosted with Sodium-Conductive Β-Alumina Nanoparticles: Application for Na-Ion Batteries

High-Performance PVDF-HFP Based Gel Polymer Electrolyte Modified by Core-Shell SiO2-PMMA for Electrochromic Devices

Effect of ZnO filler concentration on the conductivity, structure and morphology of PVdF-HFP nanocomposite solid polymer electrolyte for lithium battery application

Effect of NASCION‐Type ceramic dispersion in PAN/PVA‐based blend polymer electrolyte: A structural, thermal, and electrical study

Microporous PVDF–PMMA Blend-Based Gel Polymer Electrolyte for Electrochemical Applications: Effect of PMMA on Electrochemical and Structural Properties

Structural, Optical, and Electrical Studies of PAN-Based Gel Polymer Electrolytes for Solid-State Battery Applications

Structural, Thermal, Electrical and Electrochemical Studies of Polyvinyl Alcohol (PVA) Assisted BiFeO3 Embedded Novel Gel-Based Nanocomposite Utilizations in Polymer Electrolytes

Proton ion-conducting polymer electrolytes added with SiO2 nanoparticles: conductivity, dielectric, relaxation, and physical studies

Conductive Na3Sc2P3O12 Filler with Different Crystal Phases Modified Gel Polymer Electrolyte Membranes for Sodium Ions Batteries

Improving electrolyte performance: Nanocomposite solid polymer electrolyte films with cobalt oxide nanoparticles

Effect of SiO2 on the Performance of Cellulose/Poly(Vinylidene Fluoride) Films as Polymer Electrolytes for Lithium Ion Battery

Study of the structural, optical and electrical properties of PVA/SA performance by incorporating Al2O3 nanoparticles

Enhanced electrical properties of spun blend polymer composite electrolyte PMMA – PVdF-co-HFP – PEO/ LiBF4 containing nano SiO2 for lithium-ion batteries application

Electrolytic Performance of Sodium Alginate-Poly Vinyl Alcohol Matrix with Ammonium Bromide for Proton Conduction: Applications in Electrochemical Systems