Abstract:Gel polymer electrolyte films (GPEs) based on polyacrylonitrile (PAN) complexed with NaF salt and an Al2O3 nanofiller were prepared via solution cast method. Structural studies were performed to investigate the order of conductivity under the influence of salt and nanofillers. The prepared films were characterized using energy dispersive x-ray spectrometry (EDS) to determine the chemical composition in wt%. EDS studies reveal that PAN–NaF with Al2O3 ceramic filler decreases the degree of crystallinity with increasing concentration of the nanofiller. The UV–Vis spectrum was recorded by a Hewlett-Packard HP8452A diode array spectrometer. The structural effect of salt and nanoparticles on the conductivity was also confirmed by UV–Vis spectroscopy. The mechanical properties of the prepared polymer electrolytes were determined using a Universal Tensile Machine (Instron Model 5565, Canada) with a constant crosshead speed of 10 mm/min. The addition of nanoparticles increased both the modulus and the strength of the polymer nanocomposites. Both the tensile strength and Young’s modulus increased with increasing functionalized nanoparticle loading. The change in transition temperature caused by the incorporation of the Al2O3 nanofiller and plasticizer into the PAN+NaF complex was studied by differential scanning calorimetry (DSC) analysis. Additionally, DSC thermograms were recorded to measure the glass transition temperature and melting temperature of PAN-based electrolytes using a Mettler instrument. Conductivity studies were carried out for all the prepared polymer electrolytes to understand the conduction mechanism. The role of the ceramic phase is to reduce the melting temperature, which is ascertained from DSC. The sample containing PAN:NaF (70:30) exhibits the highest conductivity of 1.82 x 10−4 S cm−1 at room temperature (303 K) and 2.96 x 10−3 S cm−1 at 378 K. The polymer electrolytes considered in the present study exhibited an Arrhenius type of conduction. The polymer electrolyte containing 3 wt% Al2O3 nanofiller showed an ionic conductivity of 5.96 × 10−3 S cm−1. To determine transfer numbers, Wagner’s polarization method can be used. From these studies, it is observed that the conduction mechanism is predominantly due to ions. Using this (PAN–NaF– Al2O3) (70:30:3) electrolyte, a solid-state electrochemical cell was fabricated, and its discharge profiles were studied under a constant load of 100 kΩ. Finally, several cell profiles associated with this cell were evaluated and reported.

Proton ion-conducting polymer electrolytes added with SiO2 nanoparticles: conductivity, dielectric, relaxation, and physical studies

Preparation and characterization of PEO-PMMA polymer composite electrolytes doped with nano-Al 2 O 3

Electrical and Structural Characterization of PVA/PEG Polymer Blend Electrolyte Films Doped with NaClO 4

Preparation and characterization of proton conducting polymer blend electrolytes (PVC/PMMA/NH4SCN)

Synthesis and Characterization of Proton-conducting Polymer Electrolytes Based on Acrylonitrile-Styrene Sulfonic Acid Copolymer/Layered Double Hydroxides Nanocomposites

Enhanced electrochemical and mechanical properties of P(VDF-HFP)-based composite polymer electrolytes with SiO2 nanowires

Polymer Composite Electrolytes Containing Ionically Active Mesoporous SiO2 Particles

Structural, Microstructural and Electrochemical Properties of Dispersed Type Polymer Nanocomposite Films

Structural, Morphological, Electrical and Electrochemical Properties of PVA: CS-Based Proton-Conducting Polymer Blend Electrolytes

Study of PVAc-PMMA-LiCl polymer blend electrolyte and the effect of plasticizer ethylene carbonate and nanofiller titania on PVAc-PMMA-LiCl polymer blend electrolyte

The Transformative Role of Nano-SiO2 in Polymer Electrolytes for Enhanced Energy Storage Solutions

Electrolytic Performance of Sodium Alginate-Poly Vinyl Alcohol Matrix with Ammonium Bromide for Proton Conduction: Applications in Electrochemical Systems

Proton conducting flexible solid blend polymer electrolytes based on poly(ethylene oxide) and poly(vinylidene fluoride-co-hexa fluoropropylene) for electric double-layer capacitor applications

Preparation of PVA-based composite alkaline solid polymer electrolyte with La2O3 nanoparticle filler

Effect of Al2O3 nanoparticles on ionic conductivity of PVdF-HFP/PMMA blend-based Na+-ion conducting nanocomposite gel polymer electrolyte

Structural, Optical, and Electrical Studies of PAN-Based Gel Polymer Electrolytes for Solid-State Battery Applications

Study of proton-conducting polymer electrolyte based on K-carrageenan and NH4SCN for electrochemical devices

Optimization of salt concentration and Explanation of Two Peak Percolation in Blend Solid Polymer Nanocomposite Films

Sodium-Ion-Conducting Polymer Nanocomposite Electrolyte of TiO2/PEO/PAN Complexed with NaPF6

Electrical, structural, and thermal studies on a new natural gum-based solid polymer electrolyte using rosin gum

Studies on Composite Polymer Electrolyte Peo/Liclo4/Nano-Sio2