Abstract:LiNi0.8Mn0.1Co0.1O2||SiOx@graphite has received great attention in both academia and industry because it has the highest energy density among state-of-the-art commercial lithium-ion batteries. However, it suffers from severe capacity decay during high-temperature cycling or storage, which still needs to be addressed for its commercialization. In this work, fluoroethylene carbonate (FEC) is employed as an additive or a cosolvent to improve the high-temperature performance of 1 Ah LiNi0.8Mn0.1Co0.1O2||SiOx@graphite pouch cells. By adding 5% FEC as additive, the capacity retention increases from 54.5% to 67.0% after 100 cycles at 45 °C. The use of FEC as a cosolvent further increases the capacity retention to 83.3%. The improvement is ascribed to the multifunctional effects from FEC, preventing electrolyte decomposition, mitigating the resistance increment and Mn ions dissolution with the formation of the interface films, which consist of LiF and LiPOxFy species. Therefore, the employment of FEC is of great importance for the development of high-energy-density lithium-ion batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01679?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01679</a>.(Figure S1) Cycling performance of the NMC811||SiOx@Gr pouch cells with different electrolyte systems at 0.3 C and room temperature for 100 cycles; (Figure S2) EIS of the NMC811||SiOx@Gr pouch cells after formation and 100 cycles at 0.3 C and 45 °C; (Figure S3) SEM images of the NMC811 cathodes at raw state and after 100 cycles with the blank, 5% FEC system, and 30% FEC system; (Figure S4) TEM results of the SiOx@Gr anodes after 100 cycles for the three systems and at raw state; (Figure S5) GC-MS chromatograms of the three electrolytes after formation and 100 cycles at 45 °C; (Table S1) charge/discharge capacities and Coulombic efficiency in the first formation cycle of the NMC811||SiOx@Gr pouch cells using the three electrolyte systems; (Table S2) charge/discharge specific capacities of the NMC811 electrodes using different electrolyte systems in the voltage range of 3.0–4.2 V at 0.3 C and 45 °C; (Table S3) charge/discharge specific capacities of the SiOx@Gr anodes using different electrolyte in the voltage range of 0.005–4.2 V at 0.3 C and 45 °C; (Table S4) The main electrolyte components detected from GC-MS for the three electrolyte systems after formation and 100 cycles; (Table S5) LC-QTOF-MS results collected from the electrolytes after 100 cycles; (Table S6) LC-QTOF-MS results collected from the NMC811 cathodes after 100 cycles; (Table S7) LC-QTOF-MS results collected from the SiOx@Gr anodes after 100 cycles (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01679/suppl_file/ae0c01679_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

LiPO2F2 as a LiPF6 Stablizer Additive to Improve the high- temperature Performance of the NCM811/SiOx@C Battery

Practical 4.4 V Li||NCM811 batteries enabled by a thermal stable and HF free carbonate-based electrolyte

Novel Composite Electrolyte Additive for Enhancing the Thermal and Cycling Stability of SiO/C Anode Li-ion Battery

Unraveling and Mitigating the Storage Instability of Fluoroethylene Carbonate-Containing LiPF6 Electrolytes to Stabilize Lithium Metal Anodes for High-Temperature Rechargeable Batteries

Multifunctional Fluoroethylene Carbonate for Improving High-Temperature Performance of LiNi 0.8 Mn 0.1 Co 0.1 O 2 ||SiO x @Graphite Lithium-Ion Batteries

Phenyl 4-Fluorobenzene Sulfonate as a Versatile Film-Forming Electrolyte Additive for Wide-Temperature-Range NCM811//Graphite Batteries

LiPO2F2 electrolyte additive for high-performance Li-rich cathode material

A bicomponent electrolyte additive towards stabilized interface for high-performance lithium-ion batteries

Achieving a Stable Solid Electrolyte Interphase and Enhanced Thermal Stability by a Dual-Functional Electrolyte Additive Toward a High-Loading LiNi0.8Mn0.1Co0.1O2 /lithium Pouch Battery

Multifunctional Electrolyte Additive for High-Nickel LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathodes of Lithium-Metal Batteries

A Novel Multifunctional Additive Strategy Improves the Cycling Stability and Thermal Stability of SiO/C Anode Li-ion Batteries

Enhanced Electrochemical Performance of Ni‐Rich Layered Cathode Materials by Using LiPF6 As a Cathode Additive

Improved high-temperature performance of LiNi0.5Co0.2Mn0.3O2/artificial graphite lithium ion pouch cells by difluoroethylene carbonate

Enhancing the Cycling Stability for Lithium-Metal Batteries by Localized High-Concentration Electrolytes with 2-Fluoropyridine Additive

LiF-Rich Interfaces and HF Elimination Achieved by a Multifunctional Additive Enable High-Performance Li/LiNi0.8Co0.1Mn0.1O2 Batteries.

Stabilized High-Voltage Cathodes via an F-Rich and Si-Containing Electrolyte Additive

Trace Multifunctional Additive Enhancing 4.8 V Ultra‐High Voltage Performance of Ni‐Rich Cathode and SiOx Anode Battery

3-Trimethylsilyl-2-oxazolidinone, as a multifunctional additive to stabilize FEC-containing electrolyte for sodium metal batteries

Achieving a Stable Solid Electrolyte Interphase and Enhanced Thermal Stability by a Dual-Functional Electrolyte Additive toward a High-Loading LiNi 0.8 Mn 0.1 Co 0.1 O 2 /Lithium Pouch Battery

4,5-Difluoro-1,3-dioxolan-2-one As a Film-Forming Additive Improves the Cycling and Thermal Stability of SiO/C Anode Li-ion Batteries

Improving the cyclability performance of lithium-ion batteries by introducing lithium difluorophosphate (LiPO2F2) additive