Abstract:Ternary nickel-rich layered oxide LiNi0.8Co0.1Mn0.1O2 (NCM811) is recognized as a cathode material with a promising future, attributed to its high energy density. However, the pulverization of cathode particles, structural collapse, and electrolyte decomposition are closely associated with the fragile cathode-electrolyte interphases (CEI), which seriously affect the electrochemical performances of ternary high-nickel materials. In this paper, fluorine- and nitrogen-containing methyl-2-nitro-4-(trifluoromethyl)benzoate (MNTB) was selected, which was synergistically regulated with fluoroethylene carbonate (FEC) to generate a robust CEI film. The preferential decomposition of MNTB/FEC results in the formation of an inorganic-rich (Li3N, LiF, and Li2O) CEI film with uniformly dense and stable characteristics, which is conducive to the migration of Li+ and the stability of the NCM811 structure and enhances the cycling stability of the battery system. Simultaneously, MNTB effectively suppresses the adverse reaction associated with increased polarization caused by higher interface impedance due to conventional single FEC additives, further improving the rate capability of the battery. Moreover, MNTB/FEC can effectively eliminate HF, preventing its corrosion on the NCM811 cathode. Under the synergistic effect of MNTB/FEC, after 300 discharge cycles at a high cutoff voltage of 4.3 V and a current density of 1 C (2 mA cm-2), the discharge capacity of the NCM811||Li battery was 150.12 mA h g-1 with a capacity retention of 81.10%, while it was only 32.8% for the standard electrolyte (STD). The discharged capacity of the MNTB/FEC-containing battery was about 115.43 mA h g-1 at the high rate of 7 C, which was considerably higher than that of the STD (93.34 mA h g-1). In this study, the designed MNTB as a novel solvent synergistically regulated with FEC will contribute to the enhanced stability of NCM811 materials at high cutoff voltages and at the same time provide an effective modified strategy to enhance the stability of commercial electrodes.

Trace Multifunctional Additive Enhancing 4.8 V Ultra‐High Voltage Performance of Ni‐Rich Cathode and SiOx Anode Battery

Dimethyl Sulfide Electrolyte Additive Enabled High-Voltage Lithium-Ion Battery

Synergistic Dual-Additive Regulated Carbonate Electrolyte Stabilizes Bidirectional Interface for Aggressive Ni-rich Li-metal Full Batteries

Multifunctional Electrolyte Additive for High-Nickel LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathodes of Lithium-Metal Batteries

A Multifunctional Additive Capable of Electrolyte Stabilization and Structure/Interphases Regulation of High‐Energy Li‐Ion Batteries

Tuning the Cathode‐Electrolyte Interphase Chemistry with Multifunctional Additive for High‐Voltage Li‐Ion Batteries

Multifunctional Electrolyte Additive for High-Nickel LiNi0.8Co0.1Mn0.1O2 Cathodes of Lithium-Metal Batteries

Boosting High-Voltage Practical Lithium Metal Batteries with Tailored Additives

Multifunctional Electrolyte Additive Stabilizes Electrode–Electrolyte Interface Layers for High-Voltage Lithium Metal Batteries

Regulating the Electrode-Electrolyte Interfaces of Lithium-High Nickel Batteries via a Multifunctional Additive

Additive Engineering for Robust Interphases to Stabilize High-Ni Layered Structures at Ultra-High Voltage of 4.8 V

Revolutionizing multifunctional electrolyte additive design and synthesis for high-voltage nickel-rich batteries in diverse climates

A novel cathode interphase formation methodology by preferential adsorption of a borate-based electrolyte additive

Tuning the Interface Stability of Nickel-Rich NCM Cathode Against Aggressive Structural Collapse via the Synergistic Effect of Additives

LiF-Rich Interfaces and HF Elimination Achieved by a Multifunctional Additive Enable High-Performance Li/LiNi0.8Co0.1Mn0.1O2 Batteries.

4-fluorophenylboronic anhydride as an impurity-scavenging agent and two-sided interface modifier for high-performance lithium ion batteries

Synergistic Effect of TMSPi and FEC in Regulating the Electrode/Electrolyte Interfaces in Nickel-Rich Lithium Metal Batteries.

Hydrofluoric Acid‐Removable Additive Optimizing Electrode Electrolyte Interphases with Li+ Conductive Moieties for 4.5 V Lithium Metal Batteries

Tailoring the Electrode-Electrolyte Interface for Reliable Operation of All-Climate 4.8 V Li||NCM811 Batteries

Stable and Fast Ion Transport Electrolyte Interfaces Modified with Novel Fluorine- and Nitrogen-Containing Solvents for Ni-Rich Cathode Materials

Nonsacrificial Nitrile Additive for Armoring High-Voltage LiNi0.83 Co0.07 Mn0.1 O2 Cathode with Reliable Electrode-Electrolyte Interface toward Durable Battery.