Abstract:High-nickel layered ternary cathode coupling with Si-based anode is one of the most promising strategies to realize high-energy-density batteries for power electric vehicles. However, undesired interfacial instability on both sides of cathode and anode causes continuous parasitic reactions and phase transformations, and results in fast degradation of the batteries. To address this issue, herein, in-situ reliable, compact and ionically conductive interface films are constructed effectively on both LiNi0.6Co0.2Mn0.2O2 (NMC622) cathode and SiO-C anode simultaneously by simply using a multifunctional additive, lithium difluorobis(oxalato) phosphate (LiDFBOP), due to its preferential redox reactivity then efficiently influencing the subsequent electrochemical behaviors of bulk electrolyte. These films shield the electrodes against the electrolyte attack, thus enabling long-term cycling stability and enhancing Coulombic efficiency of NMC622/SiO-C pouch cells. In addition, the highly Li-ionically conductive interphases also promote the electrode kinetics, which ensure the excellent rate capability as well as low temperature performance. The underlying interface formation mechanisms in term of specific consumption amount of additive on each electrode simultaneously are quantitatively studied by combining several complementary advanced characterizations techniques such as IC, TOF-SIMS, XPS and HRTEM etc., which not only benefit to predict the optimal addition content for cost-effective electrolyte in the actual conditions, but also validate that abundant Li-containing fluorinated inorganics and organic species regulate the microstructure and the composition of interface films, leading to enhanced ionic conductivity and intensified structure integrity, then finally contributing to the improved electrochemical performance of full pouch cells. New and in-depth insight in additive-involved interface reactions provides new opportunities for the design of rational surface films to realize high-energy batteries.

Constructing Matching Cathode-Anode Interphases with Improved Chemo-mechanical Stability for High-Energy Batteries

Synergistic Dual-Additive Regulated Carbonate Electrolyte Stabilizes Bidirectional Interface for Aggressive Ni-rich Li-metal Full Batteries

Tuning the Interface Stability of Nickel-Rich NCM Cathode Against Aggressive Structural Collapse via the Synergistic Effect of Additives

Chemo-mechanical stable cathode interphase via interface in-situ catalytic-conversion integrated design for all solid-state batteries

Synchronously Stabilizing the Interphase of Cathode and Anode Enabling Lithium Metal Batteries via Multiple Electrolyte Additives

Modulation and quantitative study of conformal electrode-electrolyte interfacial chemistry toward high-energy-density LiNi0.6Co0.2Mn0.2O2‖SiO-C pouch cells

Interphase Engineering for Stabilizing Ni-Rich Cathode in Lithium-Ion Batteries by a Nucleophilic Reaction-Based Additive.

An Interphase Engineering Method of Stabilizing Ni‐rich Cathode in Lithium‐ion Batteries by A Nucleophilic‐based Additive

Tailored Interphases Construction for Enhanced Si Anode and Ni-Rich Cathode Performance in Lithium-Ion Batteries

Improving interfacial stability of ultrahigh-voltage lithium metal batteries with single-crystal Ni-rich cathode via a multifunctional additive strategy

Simultaneous modulation of cathode/anode and electrolyte interfaces via a nitrile additive for high-energy-density lithium-metal batteries

A novel cathode interphase formation methodology by preferential adsorption of a borate-based electrolyte additive

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li<SUP>+</SUP>-conducting cathode-electrolyte interphase

Constructing Stable Interface Layer for Boosting High-Voltage Cycling Performance of Single-Crystal Ni-rich Cathodes

Tailored interface composition improves the integrity of electrode/electrolyte interphases for high-voltage Ni-rich lithium metal batteries in a sulfolane-based electrolyte

Constructing LiF/Li2CO3-rich heterostructured electrode electrolyte interphases by electrolyte additive for 4.5 V well-cycled lithium metal batteries

Invoking Interfacial Engineering Boosts Structural Stability Empowering Exceptional Cyclability of Ni‐Rich Cathode

Improving Cycling Stability of Ni‐Rich Cathode for Lithium‐Metal Batteries via Interphases Tunning

Enhancing chemomechanical stability and high-rate performance of nickel-rich cathodes for lithium-ion batteries through three-in-one modification

Durable and Adjustable Interfacial Engineering of Polymeric Electrolytes for Both Stable Ni-Rich Cathodes and High-Energy Metal Anodes

Antioxidant Layer Enables Chemically Stable Cathode-Electrolyte Interface Towards Durable and Safe Li-ion Batteries