Abstract:An apparatus for transferring thermal energy across an impermeable barrier between two or more fluids is a heat exchanger. The effective transmission of heat from a hot fluid to a cold fluid is its primary goal. The temperature differential between the two fluids directly affects this heat transfer. Using CFD study with FLUENT 2020 R1, the performance characteristics of the compact plate fin heat exchanger's improved surfaces are examined. The simulation of heat transfer and flow encompassed a variety of velocities including completely turbulent regions. The pressure, temperature, and velocity contours were taken from the Fluent simulations. To determine the heat exchanger's flow and heat transfer performance, numerical analysis has been done. Since boundary conditions are crucial to CFD, they have been carefully chosen. The flow field, heat transfer, thickness, and wavelength were all predicted using the software code for a range of air to water velocities. Three distinct wavelengths of numerical simulations for a plate-fin heat exchanger were used in the study (10, 20, and 30). There were changes to the fin thickness, entry locations, and air and water entry velocities. Solid Works and Ansys were used to create the geometry for the three-level fin models that were placed inside the heat exchanger, both with and without a cover. For determining the heat exchanger's geometry and fin isometry, three levels measuring 19.6 mm in height and 53.64 mm in width were constructed. The fins have a thickness of 0.2 to 0.4 mm. As the air and water velocities vary, so does the temperature inside the heat exchanger. Because the topmost layer is a warm stream's flow channel, the temperature rises there, whereas the opposite effect is seen close to the bottom layer. Convection heat transmission to the surroundings and conduction heat transfer through the heat exchanger's side plates are the causes of fluid temperature fluctuations in the depth direction.

Theoretical investigation of the influence of pipe diameter and exit channel width in welded plate heat exchanger on heat exchanger performance

Study on the effect of three key geometric parameters of chevron corrugated brazed plate heat exchanger on the heat transfer performance

Effects of Distribution Channel Dimensions on Flow Distribution and Pressure Drop in a Plate‐Fin Heat Exchanger

Numerical Analysis of Header Structure Improvement in a Plate-Fin Heat Exchanger

Effect of flow path on the performance of plate heat exchanger with chevron shape

A numerical and experimental study of chevron, corrugated-plate heat exchangers

Study on the Characteristics of Channel Flow in Plate Heat Exchanger

Effect of Inlet Flow Maldistribution on the Passage Arrangement Design of Multi-Stream Plate-Fin Heat Exchanger

Numerical study on hydrodynamic characteristics of plate-fin heat exchanger using porous media approach

Numerical Investigation Of Effect Of Tube Shape On Air-Side Heat Transfer And Pressure Drop Characteristics Of A Finned Tube Heat Exchanger

Numerical investigation on the effect of cylindrical turbulator on performance of corrugated plate-fin heat exchanger

Effect of flow maldistribution on heat transfer performance and temperature field of plate-fin heat exchangers

Numerical investigation of supercritical flow and heat transfer mechanism in printed circuit heat exchanger (PCHE) channels

Heat‐in‐leak and longitudinal wall heat conduction influence on three‐fluid cross‐flow heat exchanger performance

Numerical and experimental studies of flow and heat transfer characteristics in a plate heat exchanger with multi-chevron corrugate furrows

Heat Transfer and Pressure Drop in Plate Fin Heat Exchangers: A Numerical Approach

Numerical and experimental analysis of composite fouling in corrugated plate heat exchangers

Comparative study on the thermal-hydraulic performance of a shell and plate particle-SCO2 moving packed bed heat exchanger with various channel configurations

Numerical Investigation of Shell-Nozzle Diameter Effect on Thermal Performance of Shell-and-Tube Heat-Exchanger

Performance analysis of counter flow plate-fin heat exchangers considering the effect of longitudinal conduction

Investigation of heat transfer and pressure drop characteristics in metal-foam filled channels in a plate heat exchanger: A comparative experimental study