Abstract:The shell-and-plate heat exchanger is a completely welded heat exchanger that combines the best features of a shell-and-tube heat exchanger with a plate heat exchanger. The flow between the circular corrugated plates behaves as a first expanding then converging flow, leading to the intricate nature of flow structures, flow resistance, and phase-change heat transfer. The present paper numerically investigates the flow behaviors and heat transfer characteristics in the channel between the circular corrugated plates of 0.2 m in diameter, 0.0022 in corrugation depth, and 75 degrees in corrugation angle. In the simulation, the gas velocity ranges from 0.25-6.00 m/s while the liquid velocity from 0.01-0.20 m/s. The wall is set as adiabatic and constant temperature condition of 350 K, respectively. For the single-phase flow, a longitudinal spiral flow along the main flow direction is formed, and the local velocity at the edge of the circular plate is generally higher and more turbulent than that in the central area. Additionally, the increase of Reynolds number leads to a more significant pressure drop but an apparent heat transfer enhancement. Based on the analysis of the friction factor and Nusselt number with Reynolds number, the empirical correlations for predicting the flow resistance and heat transfer characteristics in the channel are proposed. For the two-phase flow, we employed the VOF model to investigate the distribution of the phases in the downward flows. Compared with the experimental data, the numerical results are demonstrated to provide an accurate analysis of the phases distribution, particularly in the cross section of the channel. Accordingly, the flow patterns in the downward two-phase flows are identified as bubbly flow, slug flow, film flow, and churn flow. Based on the variation of the averaged void fraction, the film flow can be identified as alpha > 0.8 while bubbly flow as alpha < 0.5. Additionally, the void fraction in the cross section of the flow channel along the flow direction is analyzed in detail. Since the effect of the expansion and contraction of structures will go away with an increase in the gas mass flow rate, it can be anticipated that the effect of uniform distribution is more prominent for slug flow and is negligible for film flow.

Numerical and experimental studies of flow and heat transfer characteristics in a plate heat exchanger with multi-chevron corrugate furrows

A numerical and experimental study of chevron, corrugated-plate heat exchangers

Study on the effect of three key geometric parameters of chevron corrugated brazed plate heat exchanger on the heat transfer performance

Flow and Heat Transfer Analysis of Perforated Fin in Compact Heat Exchanger

Numerical study on hydrodynamic characteristics of plate-fin heat exchanger using porous media approach

Experimental investigation and thermodynamic analysis of performance of plate heat exchanger for low Reynolds number

Numerical Simulation and Thermodynamic Test Analysis of Plate Heat Exchanger Based on Topology Optimization

NUMERICAL STUDY OF FLOW AND HEAT TRANSFER CHARACTERISTICS IN SHELL-AND-PLATE HEAT EXCHANGERS

Numerical Analysis of Header Structure Improvement in a Plate-Fin Heat Exchanger

Effects of Pitch-to-Height Ratio on Flow and Heat Transfer Characteristics in Cross-Corrugation Passages

Numerical and Visual Performance Investigation of a Plate Heat Exchanger Designed by Topological Optimization

Study on the thermal performance of the cross-flow plate heat exchangers

Study of flow and heat transfer performance of plate-fin heat exchanger

Investigation Of Precipitation Fouling In Corrugated Plate Heat Exchangers

Numerical simulation of flow and heat transfer performance of tube-shell coupled helically coiled corrugated tube heat exchanger

Numerical Modeling and Experimental Verification of Flow and Heat Transfer over Serrated Fins at Low Reynolds Number

Study on the Characteristics of Channel Flow in Plate Heat Exchanger

Numerical Study of Fluid Flow and Heat Transfer in Plate-Fin Heat Transfer Exchanger of Htgr

Numerical Simulation of Single-phase Flow and Heat Transfer in Dimple Plate Heat Exchanger

Numerical simulation and optimization of single-phase turbulent flow in chevron-type plate heat exchanger with sinusoidal corrugations

Effect of Fin Types and Prandtl Number on Performance of Plate-Fin Heat Exchanger: Experimental and Numerical Assessment