Abstract:The polymorph of lithium vanadyl phosphate ε-LiVOPO4 is a promising multi-electron intercalation cathode material for Li ion batteries with theoretical capacity of 330 mAh/g. It has been shown to reversibly intercalate and deintercalate Li ions over two redox potentials corresponding to V3+/4+ and V4+/5+ oxidation states. Here we report a low-temperature (LT) hydrothermal synthesis method that produces pure LiVOPO4·2H2O between 120 and 160 oC and pure ε-LiVOPO4 between 180 and 220 oC. We also investigate the structure, electrochemical and thermal properties of the products focusing on ε-LiVOPO4. X-ray diffraction indicates that the lattice parameters of LT ε-LiVOPO4 change linearly with synthesis temperature increase, approaching those reported for high-temperature (HT) synthesized ε-LiVOPO4. Thermogravimetric analysis with mass-spectroscopy (TGA-MS) indicates water loss at 350 °C decreasing from 1.5 to 0.5 wt.% as the synthesis temperature increases from 180 to 220 °C. We have interpreted these observations as an evidence of proton intercalation into the LT ε-LiVOPO4 structure. We have further investigated the process of water loss by in-situ XRD and x-ray absorption spectroscopy (XAS) upon heating, combined with pair-distribution function analysis (PDF) and magnetic measurements of LT ε-LiVOPO4 heated to 350 and 750 °C. In-situ XRD shows abrupt change in the lattice parameters dependences upon temperature at 350 °C. Ex-situ studies indicate that the structure and properties of LT samples heated to 750 °C resemble those synthesized by the solid state method at 750 °C. Interesting reversible change of lattice symmetry upon heating to 550 °C was observed and will be further discussed. LT ε-LiVOPO4 has large particle size, over 10 μm, therefore high-energy ball-milling with carbon is required to bring the particle size to below 1 μm to achieve good electrochemistry. Ball-milled product shows high initial capacity around 300 mAh/g, which holds for about 10 cycles and then gradually decays. The voltage profile of LT ε-LiVOPO4 is sloping upon delithiation, in contrast with the step-like profile of HT ε-LiVOPO4. The detailed distinctions between LT and HT ε-LiVOPO4 leading to variations in the electrochemical performance will be discussed. This work was supported as part of the North East Center for Chemical Energy Storage (NECCES), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0012583.

Facile synthesis of LiVO3 and its electrochemical behavior in rechargeable lithium batteries

Synthesis and Electrochemical Performance of LiVO3 Cathode Materials for Lithium Ion Batteries

Oxalic Acid-Assisted Combustion Synthesized LiVO3 Cathode Material for Lithium Ion Batteries

Synthesis and Electrochemical Properties of Single-Crystalline Liv3o8 Nanobelts for Rechargeable Lithium Batteries

High Capacity and Excellent Cyclability of Vanadium (IV) Oxide in Lithium Battery Applications

Synthesis and structure refinement studies of LiNiVO4 electrode material for lithium rechargeable batteries

Self-Assembled Synthesis of Hierarchical Waferlike Porous Li–V–O Composites As Cathode Materials for Lithium Ion Batteries

Solvothermal synthesis of Li3VO4: Morphology control and electrochemical performance as anode for lithium-ion batteries

Boosting capacity and operating voltage of LiVO3 as cathode for lithium-ion batteries by activating oxygen reaction in the lattice

A novel approach to LiVO3 synthesis enables its outstanding lithium storage performance

Hydrothermal Synthesis, Structural Transformations and Electrochemistry of Lithium Vanadyl Phosphates

Synthesis and Electrochemical Performance of Rod-Like Liv3o8 Cathode Materials for Rechargeable Lithium Batteries

Microwave Solid-State Synthesis of LiV(3)O(8) As Cathode Material for Lithium Batteries.

Facile Synthesis of Cookies-Shaped Liv3o8 Cathode Materials with Good Cycling Performance for Lithium-Ion Batteries

Synthesis and Electrochemical Properties of Single-Crystalline Liv3o8 Nanorods As Cathode Materials for Rechargeable Lithium Batteries

Bio-template synthesis of LiVO3 anode material for high-rate and long-life lithium-ion batteries

A Large Capacity of LiV3O8 Cathode Material for Rechargeable Lithium-Based Batteries

Synthesis and Electrochemical Performance of Xliv(3)O(8)Center Dot Yli(3)V(2)(Po4)(3)/Rgo Composite Cathode Materials for Lithium Ion Batteries

Synthesis and Electrochemical Performance of 0.6li3v2(po4)3·0.4li–v–o Composite Cathode Material for Lithium Ion Batteries

Synthesis and Electrochemical Performance of Li1+xV3O8 As Cathode Material for Lithium Secondary Batteries

Ultrathin VO 2 (B) nanosheets assembled into 3D micro/nano structured flower-like microspheres for high-performance cathode materials of Li-ion batteries