Abstract:A novel and economical microwave route has been developed for the synthesis of electrochemically active LiV(3)O(8) material by using a domestic microwave oven. The heating behavior of the designed reaction system guided the preparation of LiV(3)O(8) at a suitable irradiation power (i.e. heating rate), reaction time, and temperature. At the lowest irradiation power, the conversion fraction of reactants was mainly controlled by reaction temperature. Characterization results of X-ray diffraction (XRD), Fourier transform infrared (FTIR) and Raman spectroscopy, scanning (SEM) and transmission (TEM) electron microscopy, and BET surface areas indicated that the phases of samples prepared by microwave and traditional methods were in good agreement. Nevertheless, the crystallinity, crystallite configuration, and morphology of the samples were different, and were affected by the irradiation time and power. A floppy superposition structure of nanosheets (the size of one nanosheet was about 4.5 microm x 1.2 microm x 3 nm) was preferentially grown at the lowest irradiation power, and this effect on structure was more in evidence as the nanorods formed at the highest irradiation power. Electrochemical studies on ionic conductivity, electrochemical impedance spectroscopy (EIS), and charge-discharge capacity were carried out. It was found that the conductivity, first discharge capacity, and cycle performances of the samples were affected by the crystal size, crystallinity, and crystal configuration and defection concentration. The sample L30 prepared at the lowest irradiation power and the shortest time (30 min) showed the highest discharge capacity (335 mAh/g), but its discharge capacity decreased rapidly. By comparison, the sample L100 had a floppy superposition structure of nanosheets and a high surface area, provided a good two-dimensional channel for the transition of Li(+) ions, and was stable during the intercalation/deintercalation process of Li(+) ions, therefore the high ionic conductivity, high discharge capacity, and good cycle performance were presented. The relationship between the electrochemical properties and the irradiation power was discussed.

Oxalic Acid-Assisted Combustion Synthesized LiVO3 Cathode Material for Lithium Ion Batteries

Synthesis and Electrochemical Performance of LiVO3 Cathode Materials for Lithium Ion Batteries

Facile synthesis of LiVO3 and its electrochemical behavior in rechargeable lithium batteries

Self-Assembled Synthesis of Hierarchical Waferlike Porous Li–V–O Composites As Cathode Materials for Lithium Ion Batteries

Synthesis and Electrochemical Performance of 0.6li3v2(po4)3·0.4li–v–o Composite Cathode Material for Lithium Ion Batteries

Boosting capacity and operating voltage of LiVO3 as cathode for lithium-ion batteries by activating oxygen reaction in the lattice

Agitation drying synthesis of porous carbon supported Li3VO4 as advanced anode material for lithium-ion batteries

A novel approach to LiVO3 synthesis enables its outstanding lithium storage performance

One-pot synthesis of VOSO4@C cathode via a versatile oxalic acid for lithium-ion batteries

Carbon-coated Li3V2(PO4)(3) Composite Cathode Material for Lithium-Ion Batteries: Sol-gel Synthesis and Performance

Electrochemical Performance of Nanosized Disordered LiVOPO4

A clean process of preparing VO as LIBs anode materials via the reduction of V2O3 powder in a H2 atmosphere: Thermodynamic assessment, isothermal kinetic analysis, and electrochemistry performance evaluation

Bio-template synthesis of LiVO3 anode material for high-rate and long-life lithium-ion batteries

Combustion Synthesis and Electrochemical Performance of Li [li0.2mn0.54ni0.13co0.13]o2 with Improved Rate Capability

Synthesis and Electrochemical Performance of Xliv(3)O(8)Center Dot Yli(3)V(2)(Po4)(3)/Rgo Composite Cathode Materials for Lithium Ion Batteries

Oxalic acid-assisted preparation of LTO-carbon composite anode material for lithium-ion batteries

Enhanced Electrochemical Performance of Li1.2mn0.54ni0.13co0.13o2 Cathode with an Ionic Conductive Livo3 Coating Layer

Synthesis and Electrochemical Performance of Rod-Like Liv3o8 Cathode Materials for Rechargeable Lithium Batteries

Facile Synthesis of Cookies-Shaped Liv3o8 Cathode Materials with Good Cycling Performance for Lithium-Ion Batteries

Microwave Solid-State Synthesis of LiV(3)O(8) As Cathode Material for Lithium Batteries.

Novel synthesis of LiFePO4–Li3V2(PO4)3 composite cathode material by aqueous precipitation and lithiation