Abstract:Lithium-rich layered oxides always suffer from low initial Coulombic efficiency, poor rate capability and rapid voltage fading. Herein, engineering oxygen vacancies in hierarchically Li1.2Mn0.54Ni0.13Co0.13O2 porous microspheres (L@S) is carried out to suppress the formation of irreversible Li2O during the initial discharge process and improve the Li+ diffusion kinetics and structural stability of the cathode mateiral. As a result, the prepared L@S cathode delivers high initial Coulombic efficiency of 92.3% and large specific capacity of 292.6 mA h g−1 at 0.1 C. More importantly, a large reversible capacity of 222 mA h g−1 with a capacity retention of 95.7% can be obtained after 100 cycles at 10 C. Even cycled at ultrahigh rate of 20 C, the L@S cathode can deliver stable reversible capacity of 153 mA h g−1 after 100 cycles. Moreover, the full cell using L@S as cathode and Li4Ti5O12 as anode exhibits a relatively high reversible capacity of 141 mA h g−1 with an outstanding voltage retention of 97% after 400 cycles at a large current density of 3 C. These results may shed light on the improvement of electrochemical performances of lithium-rich layered oxides via the multiscale coordinated design based on atomic defects, microstructure and composition.

One-pot synthesis of VOSO4@C cathode via a versatile oxalic acid for lithium-ion batteries

Optimization of VOSO4@C Cathode Materials with CNT and GO for Lithium-Ion Batteries

Low-cost Synthesis of Hierarchical V2O5 Microspheres As High-Performance Cathode for Lithium-Ion Batteries.

Self-Assembled Synthesis of Hierarchical Waferlike Porous Li–V–O Composites As Cathode Materials for Lithium Ion Batteries

Direct synthesis of vanadium pentoxide powder with carbon recombination as aqueous zinc-ion battery cathode

Graphite-anchored Lithium Vanadium Oxide As Anode of Lithium Ion Battery

Porous Monodisperse V2O5 Microspheres As Cathode Materials for Lithium-Ion Batteries

An elaborate insight of lithiation behavior of V2O5 anode

Facile Synthesis of Tremella-Like Li<sub>3</sub>V<sub>2</sub>(PO<sub>4</sub>)<sub>3</sub>/C Composite Cathode Materials Based on Oroxylum for Use in Lithium-Ion Batteries

Synthesis of Carbon-Coated Li3VO4 and Its High Electrochemical Performance As Anode Material for Lithium-Ion Batteries

Facile Synthesis of Tremella-Like Li3V2(PO4)3/C Composite Cathode Materials Based on Oroxylum for Use in Lithium-Ion Batteries

Engineering oxygen vacancies in hierarchically Li-rich layered oxide porous microspheres for high-rate lithium ion battery cathode

Synergistic effect of sulfur on electrochemical performances of carbon‐coated vanadium pentoxide cathode materials with polyvinyl alcohol as carbon source for lithium‐ion batteries

V2O3/C composite fabricated by carboxylic acid-assisted sol–gel synthesis as anode material for lithium-ion batteries

Rational Design of a LiVPO 4 F@C Microsphere Cathode Enabled by a One-Step Hydrothermal Reaction for Lithium-Ion Batteries

Electrochemical performance of the carbon coated Li3V2(PO4)3 cathode material synthesized by a sol–gel method

Rational design of V2O5 nanorod anchored carbon microsphere cathode materials for improved-performance lithium-ion batteries

Superior electrochemcial performances of core–shell structured vanadium oxide@vanadium carbide composites for Li-ion storage

Facile and controllable synthesis of solid Co3V2O8 micro-pencils as a highly efficient anode for Li-ion batteries

High Capacity and Excellent Cyclability of Vanadium (IV) Oxide in Lithium Battery Applications

Electrolyte-assisted Low-Voltage Decomposition of Li2C2O4 for Efficient Cathode Pre-Lithiation in Lithium-Ion Batteries.