Abstract:Natural loess has poor engineering properties because of its own loose and porous nature. To meet the needs of engineering construction, this study attempted to add silica micro powder mixed with cement into loess to improve its mechanical properties. The direct shear test, triaxial shear test, and scanning electron microscope (SEM) test were used to evaluate the strength characteristics and micropore structure modifications of silica micro powder and cement stabilized loess. The results showed that the addition of silica micro powder alone increased the shear strength of loess, while when silica micro powder was mixed with cement, the improvement in strength increased significantly. 3% cement with 10% silica micro powder is the optimum content to stabilize loess. The shear strength of the stabilized loess for 28 days under 200 kPa confining pressure was 2255 kPa, which was 34.9% higher than that of plain loess. Under the same cement content, the cohesion of loess increased with the increase of silica micro powder content, and the internal friction angle increased first and then decreased. The increase in curing age and the decrease in water content were positively correlated with shear strength, and the prediction formula of shear strength parameters of stabilized loess is established. In the SEM test, through qualitative analysis, it is found that the unreacted silica powder mainly physically filled the pores of loess, while the reacted silica micro powder and cement mainly combine with hydration products, which together enhanced the compactness of loess. From the quantitative analysis, it can be seen that with the addition of silica micro powder and cement, the macropores and mesopores between loess particles are transformed into small pores and micropores, the orientation of pores is enhanced, and the loess structure becomes more compact, which further revealed the mechanism of silica micro powder combined with cement to stabilize loess. The results of this study demonstrate that silica micro powder mixed with cement can effectively improve the mechanical properties of natural loess, providing a promising approach for reinforcing loess in engineering applications.

Stabilizing Geotechnical Properties of Loess Soil by Mixing Recycled Polyester Fiber and Nano-SiO2

Stress–Strain Behavior of Loess Soil Stabilized with Cement, Zeolite, and Recycled Polyester Fiber

Study on Improving Loess Properties with Permeable Polymer Materials

Effect of Stabilization/solidification on Mechanical and Phase Characteristics of Organic River Silt by a Stabilizer

The Effect of Polymer-Fiber Stabilization on the Unconfined Compressive Strength and Shear Strength of Sand

Strength properties, microstructural evolution, and reinforcement mechanism for cement-stabilized loess with silica micro powder

Shear strength of clayey sand treated by nanoclay mixed with recycled polyester fiber

Mechanical Properties and Microscopic Study of Steel Slag–Fly Ash-Solidified Loess under Alkaline Conditions

Mechanical characterization and water stability of loess improved by bio-based materials: An eco-friendly approach

Effect of cellulose nanofibers and recycled glass powder on the geotechnical and microstructural parameters of dispersive soil

A Clay-Based Geopolymer in Loess Soil Stabilization

Analysis of strength development in non-traditional liquid additive-stabilized laterite soil from macro- and micro-structural considerations

Improving foamed mixture lightweight soil containing red mud properties by utilizing nano-SiO2

Improvement of mechanical strength of low-plasticity clay soil using geopolymer-based materials synthesized from glass powder and copper slag

Utilization of red mud for producing a high strength binder by composition optimization and nano strengthening

Reinforcement of Silty Soil via Regenerated Fiber Polymer: A Study on Microscopic Mechanisms

Mechanical behavior and strengthening mechanism of loess stabilized with xanthan gum and guar gum biopolymers

Effect of nanosilica on the hydrological properties of loess and the microscopic mechanism

Review of chemical stabilizing agents for improving the physical and mechanical properties of loess

Synergetic Mechanism of Multiple Industrial Solid Waste-Based Geopolymer Binder for Soil Stabilization: Optimization Using D-Optimal Mixture Design

Effect of polypropylene fibre and lime admixture on engineering properties of clayey soil