Abstract:Co-Ni-based superalloys are known for their capability to function at elevated temperatures and superior hot corrosion and thermal fatigue resistance. Therefore, these alloys show potential as crucial high-temperature structural materials for aeroengine and gas turbine hot-end components. Our previous work elucidated the influence of Ti and Ta on the high-temperature mechanical properties of alloys. However, the intricate interaction among elements considerably affects the oxidation resistance of alloys. In this paper, Co-35Ni-10Al-2W-5Cr-2Mo-1Nb- x Ti-(5– x )Ta alloys ( x = 1, 2, 3, 4) with varying Ti and Ta contents were designed and compounded, and their oxidation resistance was investigated at the temperature range from 800 to 1000° After oxidation at three test conditions, namely, 800°C for 200 h, 900°C for 200 h, and 1000°C for 50 h, the main structure of the oxide layer of the alloy consisted of spinel, Cr 2 O 3 , and Al 2 O 3 from outside to inside. Oxides consisting of Ta, W, and Mo formed below the Cr 2 O 3 layer. The interaction of Ti and Ta imparted the highest oxidation resistance to 3Ti2Ta alloy. Conversely, an excessive amount of Ti or Ta resulted in an adverse effect on the oxidation resistance of the alloys. This study reports the volatilization of W and Mo oxides during the oxidation process of Co-Ni-based cast superalloys with a high Al content for the first time and explains the formation mechanism of holes in the oxide layer. The results provide a basis for gaining insights into the effects of the interaction of alloying elements on the oxidation resistance of the alloys they form.

Effect of Minor Alloying Elements on the Oxidation Behavior of Ni-Base Alloys in a High-Temperature Steam Environment

The Effects of Alloying Elements Cr, Al, and Si on Oxidation Behaviors of Ni-Based Superalloys

Mechanical Properties and Oxidation Characteristics of TiNiAl(Nb) Intermetallics

The Effects of Refractory Elements on Mechanical Properties in CoCrNiFe Concentrated Solid Solution Alloys Across Different Temperatures

Effect of Molybdenum on Isothermal Oxidation Behavior of 4th Generation Nickel-Based Single Crystal Superalloys

900 °C oxidation resistance of Ni-base superalloys alloyed with different refractory elements

Effect of Ti and Ta content on the oxidation resistance of Co-Ni-based superalloys

Tuning Mo/W ratio to improve high temperature oxidation resistance of single crystal nickel base superalloys

Oxidation behaviour and microstructural stability of alloy 625 during long-term exposure in steam

High-throughput experiment-assisted study of the alloying effects on oxidation of Nb-based alloys

Oxidation Behaviour of New Nickel-Base Superalloys with Varying Aluminium: Niobium Ratio

Effects of trace secondary elements on microstructure and properties in CoCrMnFeNiX0.1 alloys

Effect of Chromium Content on the Oxidation Behavior of a Ta Stabilized Γ’-Strengthened Polycrystalline Co-30Ni-10Al-4W-4Ti-2Ta Alloy

Effect of Mn content on the high-temperature oxidation behaviors of Mn-substituted-for-Ni alumina-forming austenitic stainless steel

Effect of Cr and W addition on the oxidation behavior of Ni–8%Al alloy at 1000 °C

High-temperature oxidation behaviors and mechanisms in newly designed L1 2 -strengthened high-entropy alloys

The Effect of Nb, Ta, and Ti on the Oxidation of a New Polycrystalline Ni-Based Superalloy

Effect of molybdenum on the oxidation resistance of FeCrAl alloy in lower temperature (400 °C) and higher temperature (1200 °C) steam environments

High-Temperature Oxidation Resistance of High-Nb TiAl-Based Alloy

Effect of Alloying Elements on the High-Temperature Yielding Behavior of Multicomponent γ'-L12 Alloys

Revealing the oxidation behavior of AlCr x FeNi lightweight multi-principal element alloys via experimental and first-principles calculations