Abstract:Tensile stress-strain testing is used to investigate fracture behavior of carbon black-reinforced styrene-butadiene rubber, using 50 replicate specimens. Four vulcanized rubber compounds are studied: a CB-filled SBR with standard mixing conditions (Control); the same formulation with intentional poor mixing of the CB; and materials identical to the control material but formed by adding minor amounts of 0.5 mm diameter glass microspheres (beads) – serving as large model defects/inclusions - using a two-roll mill at two levels corresponding to average values of 0.78 and 6.24 beads per gauge section region of the tensile test specimen. This paper focuses on microscopy analysis of the resulting fracture surfaces to complement our recent publication on Weibull failure statistics for distributions of tensile strength and crack precursor size (Polymers 12, 203 (2020)). All 200 fractured specimens from tensile testing at 23°C are imaged with light microscopy and exhibit fracture surfaces that are characterized by relatively smooth planes that are perpendicular to the uniaxial loading direction. The majority of tensile failures originate from the edges of the dumbbell specimens, in line with expectations from fracture mechanics. Light microscopy reveals concentric fracture ring features of high specular reflectance emanating from crack precursors, which are a universal feature of the failure process for these compounds and independent of precursor type, size, or location. Non-contact interferometric microscopy confirms that the rings are the result of variations in surface micro-roughness; proceeding outwards from the precursor as rough-smooth-rough to the edge of the fracture surface. Fracture rings are also observed for tensile tests performed at 80°C. The variation in surface roughness of the fracture surface has parallels to the stick-slip tearing behavior seen for rubbers torn at medium to high rates. To the best of the authors’ knowledge, this is the first time that such striking features have been reported.

Constitutive modeling for the tear fracture of rubber with filler particles

Experimental Characterization and Finite Element Modeling the Deformation Behavior of Rubbers with Geometry Defects

Effects of Large Deformation and Velocity Impacts on the Mechanical Behavior of Filled Rubber: Microstructure-Based Constitutive Modeling and Mechanical Testing

Molecular simulation guided constitutive modeling of filled rubber: Bridging structural parameters to constitutive equations

A multiscale phase field fracture approach based on the non-affine microsphere model for rubber-like materials

A Novel Constitutive Model of Carbon Black Rubber for the Numerical Analysis of Press-Fitting of Rubber Bushing

A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials

Development of Fatigue Life Model for Rubber Materials Based on Fracture Mechanics

Micromechanical based model for predicting aged rubber fracture properties

Temperature-Dependent Tearing Behavior of Rubber Materials: Characterization and Modeling

Finite viscoelasticity of filled rubbers: experiments and numerical simulation

A MICROSCOPY INVESTIGATION OF RUBBER COMPOUND CRACK PRECURSORS AND TENSILE FRACTURE SURFACES

Future trends in predicting the complex fracture behaviour of rubber materials

Constitutive Behaviors and Mechanical Characterizations of Fabric Reinforced Rubber Composites

Fracture in Silica/Butadiene Rubber: A Molecular Dynamics View of Design–Property Relationships

A Novel Planar Tension Test of Rubber for Evaluating the Prediction Ability of the Modified Eight-Chain Model under Moderate Finite Deformation

A Novel Method for Constitutive Characterization of the Mechanical Properties of Uncured Rubber

A mixed phase-field fracture model for crack propagation in punctured EPDM strips

Finite Element Simulation of Radial Tire Building and Shaping Processes Using an Elasto-Viscoplastic Model

A micromechanical model of filled elastomers based on the directional hydrodynamic strain amplification factor

Experimental Investigation and Constitutive Modeling of Uncured Carbon Black Filled Rubber at Different Strain Rates