Abstract:A comprehensive analytical model for predicting the long-term durability of polymers and polymer matrix composites should in general take into account polymer viscoelastic/viscoplastic creep, hygrothermal effects, and the effects of physical and chemical ageing on material response. These effects, in turn are influenced by a multitude of factors such as polymer morphology, service temperature, ambient relative humidity, internal moisture concentrations, stacking sequence, fibre volume fraction, fibre architecture, applied stress level, degree of damage and ageing time. The primary objective of this paper is to present a multi-scale modelling methodology to simulate the long-term interlaminar properties in polymer matrix woven composites and then predict the critical regions where failure is most likely to occur. A micro-mechanics approach towards modelling the out-of-plane viscoelastic behaviour of a five-harness satin woven-fibre cross-ply composite laminate is presented, taking into consideration the weave architecture and time-dependent effects. In-plane properties are assumed to be dominated by the carbon fibres and are hence deemed elastic. The classical lamination theory model proposed by Raju and Wang is adapted to include the in-plane elastic behaviour of woven fibre composites. For the matrixdominated out-of-plane response, a viscoelastic creep model is employed to model the resin, based on Schapery's nonlinear viscoelastic constitutive law. In addition, physical ageing of the matrix has been included in the model, using the effective time theory proposed by Struik. Furthermore, the effect of large deflections and rotations on the time dependent out-of-plane behaviour is also investigated using the micro-mechanics model. The homogenized in-plane and out-of-plane compliance obtained using the proposed micro-mechanics methodology could be applied within the framework of a structural finite element code to model the macro-scale long-term behaviour of a woven fabric composite structure.

Micromechanical based model for predicting aged rubber fracture properties

Multi-Scale Modelling of Long-Term Mechanical Behaviour in Polymer Composite Laminates with Woven Fibre Architecture

Modeling the Effect of Physical Aging on the Stress Response of Amorphous Polymers Based on a Two-Temperature Continuum Theory

Experimental Characterization and Finite Element Modeling the Deformation Behavior of Rubbers with Geometry Defects

Modeling the thermo-oxidative aging effects on fatigue life of natural rubber using a continuum damage mechanics approach

A physics-informed multi-agents model to predict thermo-oxidative/hydrolytic aging of elastomers

Physics and chemistry-based constitutive framework for thermo-chemically aged elastomer using phase-field approach

Physics-based Constitutive Equation for Thermo-Chemical Aging in Elastomers based on Crosslink Density Evolution

Improved Dual Network Model for Aging of Rubber Composites under Set Strains

Damage of Cross-Linked Rubbers as the Scission of Polymer Chains: Modeling and Tensile Experiments

A Micro-mechanical Approach to Model Thermo-Oxidative Aging in Elastomers

A multiscale phase field fracture approach based on the non-affine microsphere model for rubber-like materials

Damage of Cross-Linked Rubbers as the Scission of Polymer Chains: Modeling and Tensile Experiments, Report 1

Network Alteration of Cyclically Loaded Elastomers Mediated by Dynamic Bonds

On the ageing behaviour of NBR: chemomechanical experiments, modelling and simulation of tension set

Physics and Chemistry-Based Constitutive Modeling of Photo-Oxidative Aging in Semi-Crystalline Polymers

Micromechanically motivated finite-strain phase-field fracture model to investigate damage in crosslinked elastomers

Modeling of Load Responses and Aging of High Strength Fibers Considering UV-radiation

A rate-dependent aging constitutive model of EPDM rubber

Constitutive Model for Thermal-Oxygen-Aged EPDM Rubber Based on the Arrhenius Law

Designing the Cross-Linked Network to Tailor the Mechanical Fracture of Elastomeric Polymer Materials