Abstract:An all-metal High Efficiency Particulate Air (HEPA) filter has been recently developed as an alternative to traditional HEPA filters fabricated with conventional glass fibers. This metal filter was developed utilizing sintered porous metal media fabricated from nickel metal powder. One specific application is the potential for replacement of glass fiber HEPA filters currently used in High Level Waste (HLW) tank ventilation systems at various Department of Energy (DOE) nuclear waste storage sites in the US. The glass filters are subject to a shortened life span due to their deterioration from moisture condensation and therefore must be disposed of when spent. The disposal process is costly, creates solid waste, and is hazardous since the site personnel are at risk of exposure to radiation. Savannah River Technology Center (SRTC) began investigating the use of porous metal as a HEPA filter material in 1996. This effort subsequently lead to a DOE funded development. This project, under DOE funding, developed novel technology to replace the glass fiber HEPA filters with a regenerable and more durable filter. A cylindrical nickel sintered porous metal filter element was developed for this application. The nickel filter is cleaned by washing the dirty surface with an in situ spray wash. Temperature, humidity, moisture, and other factors associated with the HLW tanks do not affect the metallic media; thereby resulting in an anticipated long service life of at least 15 years. The filter has multiple tubular elements welded to two tube sheets for reliable sealing and integrity. All materials of construction are stainless steel or nickel. The filter design incorporates two means for particle collection – cyclonic inlet separator and metallic HEPA filter elements. The cyclonic inlet separator, which assists in removing heavy particles or droplets, has demonstrated removal efficiencies of 50 to 70% of ISO 12103-1, A-2 (fine grade) Arizona test dust. After exiting the cyclonic filter separator, the dirty gas stream then passes into the inside of the cylindrical metal filter elements and flows radially from inside to outside of the filter media, with particulate collecting primarily on that inner diameter surface. When a terminal pressure drop is reached, the particles that collected on the inner diameter surface are removed with an in situ spray wash, thereby reducing radiation and eliminating contaminant accumulation. Each filter element possesses its own spray-wash nozzle. The nickel filters have achieved removal efficiencies, of a 0.3 micrometer di-octyl phthalate (DOP) aerosol, ranging from 99.975 to 99.999% when tested according to the standard ASTM DOP test for HEPA filters. A total of 32 filters have undergone HEPA efficiency testing. One of the elements that achieved a 99.999% removal efficiency was subsequently plugged and cleaned in situ 7 times with simulated sludge/salt particles and atmospheric dust. After these rigorous tests, subsequent DOP testing showed the filter still achieved 99.999% removal efficiency. The media design flow specification is 9.1 m 3 /min/m 2 (30 CFM/ft 2 ) at a maximum differential pressure of 0.24 bar (3.5 psi). All nickel metal filters have tested at or below that design pressure drop. While this is a higher pressure drop than traditional glass fiber HEPA filters, this system pressure is accommodated by a vacuum pump of appropriate capacity.

Performance assessment of HEPA filter against radioactive aerosols from metal cutting during nuclear decommissioning

Filtration efficiency of woven metal fiber filter for aerosol generated by plasma torch metal cutting

Aerodynamic diameter and radioactivity distributions of radioactive aerosols from activated metals cutting for nuclear power plant decommissioning

Performance Evaluation of High Efficiency Particulate Filters for The Removal of Sub-Micrometer Radioactive Aerosols in Nuclear Power Reactors. Simulation Study

Collection and characterization of aerosols from metal cutting techniques typically used in decommissioning nuclear facilities

Sampling for Characterizing Radioactive Aerosol From Activated Metal During Cutting With Plasma Arc Torch for Internal Dose Assessment

Characteristics of radioactive aerosols during the pre-decommission phase of the experimental shielding reactor

SINTERED POROUS METAL HEPA FILTER

Air Purification Performance Analysis of Magnetic Fluid Filter with AC Non-Thermal Plasma Discharge

Aerosol, Gas, and Swarf Production during Underwater Cutting of Reactor Core Internals Using Electron Discharge Machining

Investigation of aerosol generation through laser cleaning of various surfaces and optimization of mist & spray scavenging

Cold Plasma Gliding Arc Reactor System for Nanoparticles' Removal from Diesel Cars' Exhaust Gases

Laser cutting studies on 10–60 mm thick stainless steels with a short focus head for nuclear decommissioning

Features of direct measurements for evaluation of the volume activity of radionuclides in the air of the working area

Application of Plasma Arc Cutting Technology in Dismantling of Large Metal Components in Containment Building

Development of a radiochemical test procedure for the separation of aerosol-borne allergens

Plasma air filtration system for intercepting and inactivation of pathogenic microbial aerosols

Electrostatically Assisted Metal Foam Coarse Filter with Small Pressure Drop for Efficient Removal of Fine Particles: Effect of Filter Medium

Non-thermal plasma for decontamination of bacteria trapped in particulate matter filters: plasma source characteristics and antibacterial potential

Comparison of Pressure Drop and Filtration Efficiency of Particulate Respirators using Welding Fumes and Sodium Chloride

A reform in the helium purification system of the HTR-10: gamma dose rate measurement and suggestions for decommissioning